Everything posted by mipafox
-
Looks like snow...
It's always been Taylor Ham. At least the good stuff.
-
Looks like snow...
PA instituted a ban on carrying guns in public unless you have LTCF. That's the way our State of Emergency works.
-
Looks like snow...
Most heterosexual storm of all time. Did I use that word right?
-
medal display
Pin my wings upon my chest and bury me in the leaning rest. I was quite please with a display case I bought from this guy to put coins in: http://peterconsalvi.com/
-
Looks like snow...
That's not far from the truth. Around 2002 in Trenton I turned on the TV before a snow storm. A reporter was interviewing a woman "making her last minute preparations for the storm" and asked her what she was out and about for. "Bread and Milk. Yeah, bread and milk. You gotsta have bread and milk when it snows. I don't know why. I don't know why you gotsta have it. But you gotsta have it." If anyone recalls, this was about the time that reporters gave up on even the appearance of having shame or standards. And shortly after our stupid gene was tripped to rabid badger condition by exposure to Sparks and a pandemic rate of Emo's.
-
Pulled Over by Police - Legal Firearm in Car, Standard Procedure?
Because in Jersey it is illegal by default.
-
Looks like snow...
Where did you hear that? I don't think the storm has really started much in this region.
-
Looks like snow...
OK, now I'm at 8-12". I can deal with that. Please keep the power on. Hope you guys with your 2' are OK.
-
Looks like snow...
The joke was that it won't matter with 3 feet of snow, just like it won't matter with 6000°. That's not precisely true, but it's a funny. Ha ha. Get the cherry syrup water ice sprayers loaded on the NJSP helicopters!
-
Looks like snow...
Oh, screw that, how did I get dragged into this? I've been reading 8-16" until now.
-
Looks like snow...
Yeah, and the surface of the sun is 6,000° but at least it's a dry heat
-
Looks like snow...
You guys are screwed. National Weather Service is predicting 2 - 3' North Jersey and up to 2' South Jersey based on the zip codes I checked. I hope this doesn't turn into another widespread power outage.
-
What the cluck
I think that when it comes to our food supply and hostile overseas communists, that's actually one of the few places the federal government could intervene and set policy to protect our nation IMO. 95% of what the federal government does violates the Constitution, but this is exactly what they were meant to be doing.
-
Bedroom safe
    I just came up with an idea if you have a torch or just really want to get crazy. Get a sheet of 7 or 8 gauge steel (tough stuff) and bend it in an "L" shape with the foot of the L not quite as long as your nightstand drawer is deep. For instance, a night stand drawer is about 3.5" deep so make it about 2.5" long (so it is out of sight). Drill the appropriate holes in it for mounting the safe to the top of the nightstand and to mount it to the wall. Pull the drawer out and use it to line the inside of the nightstand, beneath the top piece and against the back piece. Bolt the safe to the top of the nightstand and to the metal sheet. Bolt the metal sheet and the nightstand to the studs in the wall. Insert the drawer back into the nightstand and the sheet can no longer be seen. Might have to trim a little off the top of the rear wall of the drawer to clear the sheet and bolt attachments. Even if you smash that nightstand to pieces you are not getting that safe out of the house without bolt cutters. And depending on what kind of bolts you use, there might not be enough exposed to even get bolt cutters on them. It's a little over the top but some people like projects like this and it would be an easy one. Could also use flat bar steel instead of sheet. Or, put the safe on the nightstand and bolt directly to the wall. But I think most are too small to get two studs and if you only get one it will be ripped out pretty easy.
-
Bedroom safe
I don't think you can hide safe from your kids long term.
-
Cat surgery success
Good to hear. I spent $1500 or more on a losing battle against cancer with a cat I had. It was a monster Maine coon cat, and only about 9 years old so I wanted to try to give him a chance.
-
Will we see a rise in ND's ?
No pissing contest at all! I never suggested a closed bolt on an open bolt, I said it was dangerous. An open bolt gun with a closed bolt on an empty (as always) chamber is a gun that can accidentally go of. And they do. Anything that makes the bolt go back, such as dropping it, or pulling it, or the handle catching on something, can feed a round. That will make it fire by definition. You do not need to touch a trigger to make an open bolt gun fire if the bolt is closed. This is why open bolt guns are carried cocked (bolt open) and locked (safety on). Many manufacturers have incorporated designs to allow a closed bolt to be a LITTLE safe, such as a notch for the cocking handle to keep it from opening under most handling, or turning the cocking handle to prevent it from moving. Now THAT is a club I wasn't disputing anything you said at all, and I didn't. I was taking the opportunity to point out the unusual handling dangers of open bolt weapons (especially SMGs) to the community. Most normal people want the bolt down on an empty chamber if they want to be super extra safe. Most normal people start working the action on a gun if it malfunctions. Both can cause an open bolt to fire. One I neglected to mention - failure to feed. Failure to feed in a handgun or AR or AK means you should take a look and clear it. Failure to feed on an open bolt means your weapon is about to go off at any moment. Because if that round chambers it's "Bang!" Aim it at the target, remove the mag and expect it will go off when you remove the mag if it hasn't already. Because of the crappy ATF rules, these are not firearms most of us are familiar with even in semi, since only several thousand have been grandfather in semi.
-
Pulled Over by Police - Legal Firearm in Car, Standard Procedure?
Get hit from behind and a long lost hollowpoint rolls out from under your seat or your trunk pops open. Or cop just decides to do it and lie about getting your permission later.
-
Will we see a rise in ND's ?
If you want safety with open bolt, it's cocked and locked. It's a lot more frightening than a 1911, but the gun is most likely to fire with the bolt closed on an empty chamber (which is always the case with open bolt) or while working the bolt to charge or even clear a jam. Even Safe won't help you with a closed bolt on an empty chamber or clearing a jam if you don't pull the bolt back far enough to catch. Outside of battle or a forgiving range you drop the mag before clearing a jam on an open bolt SMG.
-
Other peoples guns at the range
Yes. But it depends on how they look, act, and speak. No D-bags, no gang members/wannabes. Also, they usually express interest in something that is going to require a minute or two of instruction and coaching from me. And I'm in their face. Nobody ever got to that point and turned out to be a d-bag.
-
He Didn't Tape This in NJ, That's for Sure
Ah, OK, I see what you mean. That is not normal. Dozens of M16A1s with pencil barrels have been fired to failure in standardized tests and the gas tube goes first. With 20" barrels. No heavy barrel required. M16A2 tests have revealed the same results. And they have the same government profile as M4 - close to pencil then thick for the last several inches. Go to any FA website and people who have done exactly this for 30 years will say the same. Not sure what is up with that Colt test, but it is not true to say barrels other than heavy tend to fail or even often fail before a gas tube. That is never true, this is the first example I have seen. Perhaps it is something special about the M4, or maybe (90% tongue in cheek) it was Colt marketing for heavier barrels. But that is not the way it works. His barrel was shitty for the intended application.
-
He Didn't Tape This in NJ, That's for Sure
Gas tube goes first in pencil barrels. And it went first in your example, evidenced by manual firing. Has nothing to do with heavy barrels.
-
He Didn't Tape This in NJ, That's for Sure
Nope. He had a shitty barrel. At least for the intended purpose. The gas tube fails. Barrel may get a little wobbly, may be "ruined" by reasonable standards, but the gas tube fails first. According to documentation and official studies. On the platform. Or the roof. Or at the range. I'm talking about US Military contract barrels and equivalent. Military grade Colt, FN, former Sabre Defense (yes I know they did not make M16s), Hydromatic. With the "Just as good or better" you buy from all the fancy boys you might get gas port or gas block erosion first. Barrel failure is bottom of the barrel, so to speak.
-
Pulled Over by Police - Legal Firearm in Car, Standard Procedure?
Thanks for the tip, but I'll skip that
-
Where to go for a weekend
I thought you guys meant Burlington, NJ. That might out-do Scranton.