Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

papercutninja

Members
  • Joined

  • Last visited

Everything posted by papercutninja

  1. Nothing over here. Firefox 11 on a Windows 7 machine.
  2. You are correct, .750 is the standard diameter for AR barrels. Also, if you have just the barrel and the upper receiver, with no lower receiver you're fine. You need to have whatever rail system/forearm system with you before the compensator is installed, as each rail system has a different barrel nut and will NOT fit over the compensator once it is permanently attached.
  3. It's basically gambling under the guise of an auction.
  4. That's actually really interesting. I wonder if having the snap-cap in there would constitute a "temporary block".
  5. Not really. iirc, the handgun permit has something like a $500 non-refundable fee and they can deny you simply based on clerical errors made by the applicant. That's just the tip of the iceberg.
  6. The M&P22 has a metal "chassis" that sits in the polymer frame. 1. Grab a punch and knock out the roll pins. I've heard that you can wiggle the safeties off just by removing the rear pin, but i wasn't able to get that to work. 2. Once both pins are out, the chassis lifts right out, and the only thing left in the frame is the mag release and mainspring. There is a bit of pressure from the mainspring pushing the whole assembly up, but no small parts will fall off. 3. The plastic safety levers are attached to square posts, and pull straight off. 4. When putting the chassis back in the frame, just make sure that the safety is down. If you install it with the safety up, you can push it down with a thin bladed screwdriver. The trickiest part to getting it all back together is getting the hammer strut to sit on the mainspring cap without slipping off. Other than that, it's a 5 minute job.
  7. S&W M&P22 12-rd mag. Just picked it up on Friday. First thing i did was remove that ridiculous thumb safety, as it was hindering a proper grip for me. Next, i have to go shoot it.
  8. M22 is generally a little more expensive than the regular HV 22s. $49 for 1K is a good price.
  9. I'm fairly sure that a stock on a C96 Mauser (repro or not) would constitute a SBR or AOW (someone will correct me if i'm wrong). Therefore it would be a no-go in NJ.
  10. And that's the way to wear it. Everyone should have one and wear it like that.
  11. The Series 70 to me is one of the few remaining "correct" 1911A1 pistols on the market. I feel like most of the ones out there are either too loose, too tight or just plain too expensive. Great in stock form and not *so* valuable/collectible that it'd be a shame to modify.
  12. Hmm. Interesting. I'm not a 1911 expert by any means, so i don't know if i can help any further.
  13. Have you ejected the magazine from the pistol? It almost sounds like the trigger bow is dragging on something...
  14. Do you really need to replace the winter tires? Why not just drive on em til they wear down? That will (temporarily) save you $500.
  15. Ok, the video on that page was hilarious.
  16. There are couple of options that will work just fine. 1. Get the F-marked, and grind the lug down. Not too hard to do. Even a basic dremel will take care of it. 2. Get a taller A2 sight post. They make ones that are slightly longer to compensate for the non-F marked front sight base. http://www.midwayusa.com/product/810857/dpms-front-sight-post-square-extended-030-higher-ar-15-matte
  17. Follow the for sale forums on Ar15.com, retro 20" uppers with A1 sights seem to pop up fairly regularly. Couple that with a stripped lower (NoDakSpud has some simple, retro-looking ones for under $100 shipped), and you can have a full-on '60s replica build for well under $1K.
  18. As a semi-retired airsofter, a word of warning. Those bbs leave some NASTY dents in drywall and soft to medium wood from any stray shots. Other than that, they're a great training device and you have a very nice setup! *edit* Also, some synthetic material like nylon (wears really well, cotton will eventually blow through) hung in the middle of the box, with 6 or so inches of dead space between it and the back of the box should absorb the impact and prevent the bbs from flying back out.
  19. Have you ever lived in North Dakota? Maybe he gave it to you when you lived there.
  20. papercutninja replied to Bully's topic in Handguns
    Take a look at Brownells youtube site. They have some fairly advanced videos on installing upgrade parts.
  21. Congratulations!! What an honor!
  22. You can buy without LEO/MIL restriction there, but it costs (with the Larue Mount), $555, which is $9 MORE than a Comp ML2 (with Larue Mount), thereby defeating the purpose of having a "cheap" Aimpoint PRO. I'm extremely confused by their pricing on these optics. I suppose the PRO also includes the standard Aimpoint mount, but who needs 2 mounts for a single optic?
  23. ^ That makes sense.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.