Everything posted by papercutninja
-
Joining Range 14
Dammit. And here i though i was stupid. Block. BTW, joined up today. Had a great time. I learned a couple of things: More ammo. Binoculars to see your hits on target. Bipod or sandbags for bench shooting (to sight in irons/red-dot). Short mags for bench or prone shooting. Buy a real Aimpoint (my Primary Arms clone didn't work). Letting your mags drop-free means they'll be filled with sand. Bring more guns. Get a real e-tool, not the Made in China crap.
-
replacing stock with an Ace Skeleton
Now we need pics!!
-
First gun you've ever shot
It was either an 8mm Mauser or my wife's (gf at the time) S&W .357 K frame. They were both present at my first shoot; don't remember which one i pulled the trigger on first. It may have been the Mauser.
-
SGM-11 22LR
Still, $799 is ALOT for a .22 AR.
-
Joining Range 14
I figure i'll show up around noonish, after the morning rush. Or should i go early in the morning? Also, i meant Block, not block.
-
locked or unlocked
Trigger locks are for households with children or trips to the range.
-
Joining Range 14
Thanks for the tips guys. If you see an asian guy with a beard tomorrow, with an ar and a Block, thats me.
-
Joining Range 14
So I'm going to Ft Dix tomorrow to join the range. As a first timer, what do I need besides guns, ammo, ear and eye protection?
-
Do I need a permit to trade a Handgun?
Gotcha. Thanks.
-
Do I need a permit to trade a Handgun?
Glad you get the reference back on topic (somewhat): Now if i were to directly inherit a handgun, how would i prove to the PO (for instance during a traffic stop) that i legally own that handgun?
-
DD vs Spikes Upper
let's break it down this way. I'm trying to be as objective as possible; i'm not a fanboy of any one company, and my personal opinion is that fanboys poison the internet with their rabid enthusiasm. I don't care who endorses what product or how awesome their beard is. I weigh the pros and cons of each aspect and decide on what works for me. The only reason i didn't choose anything Spike's is because i despise the spider logo. This is what i've been able to culminate by wading through the BS on M4 and ARF. Choose 1: A. If you are MIL/LE or otherwise a professional gunfighter (ie you make your living via your weapon) and your life depends on the rifle going BANG everytime you pull the trigger: BCM, Colt, DD, LMT, KAC B. If you must have the highest quality, and will not accept anything short of 99.9999% reliability: BCM, Colt, DD, LMT, KAC C. If you are a casual shooter, new to the platform, or can accept 99.998% reliability: Anything that is Mil-Spec (Spikes, Bushmaster, Armalite, anything within Mil-Spec, etc. Basically most of the AR-pattern rifles/kits on the market). D. If you are buying as an investment: Colt E. Preparing for SHTF, TEOTWAWKI, 2A being repealed, Mayan calendar ending the planet, Zombie invasion: Anything that will fit a 5.56 round, but buy many of them. EDIT TO ADD: In the interest of full disclosure, my personal AR is in category C.
-
DD vs Spikes Upper
So the question becomes, is it worth it for a casual shooter to spend the extra money on the "professional grade" stuff, or would that extra $150-$200 saved by going the "commercial" route be better served buying ammo and/or training classes? Not everyone needs a Ford F-250 when a Ranger would suffice.
-
Krdshrk's AR Build
+1 on that. The magpul asap is a great piece of kit. It's cheaper than alot of other ones as well. Also, I have a pivot detent tool I'm not using, so if you want I can lend it out.
-
tactical vests
Very nice.
-
BCM Uppers Instock!
And thats why i'll keep buying stuff from you, sir.
-
BCM Uppers Instock!
Ah, a sensible reasoning for this. A thread over on M4 basically said that the sky is falling and to buy all your ARs now because the President is going to take our guns, ammo, and mags. Also, that whole Mayan 2012 thing. Apparently the retailer that started the thread claims that no one can keep anything in stock because there's a huge buying rush. Or, the more logical reason as per Ty, that a major mfg was forced to shut down due to their own impropriety and is causing a shortage of goods. That, and the increase in cost of raw materials.
-
NJ FID Fingerprinting question
Welcome! The fingerprinting is $60.25, the FID is $5 and each pistol permit is $2. If you want a pistol permit, apply for it at the same time. It saves a bunch of time. Not sure what town you're from, but some of them can take months (even if they're not allowed to) to give you your FID/P2P (permit to purchase handguns). At a minimum, i would apply for 3, as they expire in 3 months and you can only buy 1 pistol per month. If you want, go for 6, and have 3 extended after the expiration date. The most critical part is making sure that your references return the letters to the PD immediately, that way they can't claim that the background check is being held up for lack of references.
-
First AR: Daniel Defense x S&W M&P15
So did I. The lower literally took me ~an hour, and that counted about 15 minutes that i spent looking for the takedown detent that i launched across the room.
-
First AR: Daniel Defense x S&W M&P15
They're easier to assemble than an AEG
-
Do I need a permit to trade a Handgun?
I stand corrected, thanks
- Kel-Tec KSG
-
Pics of my NJ legal M1 carbine
i was half-expecting a blank picture
-
replacing stock with an Ace Skeleton
Yup! You are good to go. I wasn't sure if it came with one or not. The type of buffer you would use "should" be matched to the gas system of your rifle, unless you're using heavier weight ammo. So the one that came with it OR the one that came with your gun is fine. Since you're installing a new stock anyway, stick the new one and keep the old one around as a spare.
-
replacing stock with an Ace Skeleton
I don't have experience with ACE stocks specifically, but you didn't need to buy the new buffer. Since you are not changing the gas system of your rifle, you don't need to change the buffer. As for the installation, it seems like it's fairly straightforward to install the ACE stock. The main gripe was that the foam rubber padding was difficult to slip onto the tube; a drop of oil was recommended. But, it does look like you need a A1/A2 rifle type receiver extension to mount the stock to. It does NOT mount onto the carbine type buffer tube. In order to remove your original stock, you'll need a stock wrench, or an otherwise large pair of pliers large enough to fit over the castle nut (in case you don't care about the finish on the castle nut). Clear the weapon, remove the upper from the lower (to make it easier to handle), remove the buffer spring, loosen the castle nut and then unscrew the buffer tube. Then, follow the instructions for the ACE stock that came with it. All told, it shouldn't take you longer than a few minutes.
-
Magazine Rig..
Thank you sir.