Everything posted by papercutninja
-
Legal or Not
I think that the Aitken scenario is an exception because there was a domestic dispute involved with his mother, so I don't know if we should use that as an example.
-
just filled out p/w for PPs
I think that he's going for "maximum" of 6, because each one can be renewed for 3 months. After using up the first 3 within 90 (1 each month for 3 months), he still has 3 more which can be renewed for another 90 days, so another 3 for the next 3 months. 6 months total.
-
ar15 lower
I've got a 14.5" + a pinned/welded >1.5" compensator to put me slightly over the minimum legal length of 16. Just posted pics and a parts list over on the AR pics thread.
-
AR pics, lets see'um!
This is my first AR, and the first gun i've purchased. It took me just over an hour to take it from a parts kit with completed upper to a complete function-checked AR-15, timed it so i could see how long it took. The only mishap was that the infamous pivot pin detent launched itself into the great unknown in my living room; a couple of spares are on order from Midway. I don't plan on shooting the rifle until i get that in place. I had bought a used Crane stock from another forum i frequent; the guy is an active-duty USMC and had brought the stock back from the Sandbox. Overall, i'm HUGELY satisfied with building my own AR-15. Parts list is below the pictures for anyone who is interested. 14.5" High-Standard chrome lined 1/7 gov't profile barrel, carbine length Battlecomp 1.5 black oxide, permanently pinned/welded A2 front sight block, bayonet lug removed A3 (Anchor Harvey, according to the forge marks) upper, M4 feedramps RRA Chrome lined bolt carrier group KAC RAS (Carbine length) McKay Enterprises RM16A2 forged lower, 5.56 cal marked M&A Parts Mil-spec LPK Magpul AFG2 Magpul Enhanced Trigger Guard Magpul MOE grip Magpul ASAP sling plate Mil-spec buffer tube, carbine buffer Crane stock (G1, non-LMT), pinned at position 1 Primary Arms M3 clone Red Dot sight, non-cantilevered mount A.R.M.S #71LR polymer rear backup iron sight Surefire M961 WeaponLight MidwestPX/Magpul PMAG 15/30 NJ legal (ordered, as part of the group buy) NJ-Legalisation (permanent attachment of muzzle device, bayonet lug removal, stock pinning) done by Arms-N-Ammo, Waterford Works, NJ.
-
ar15 lower
You're up on Wayne, so i'm thinking Arms N Ammo is out of the way for you? PK90 has a bunch of lowers (stripped and complete), uppers and complete ARs in stock. Lower parts kits start at around $40, and go up to roughly $60 for standard kits. If you want upgraded triggers, certainly the price will go up from there. I'd look to spend about the $60 for the better LPKs.
-
ar15 lower
Try these: http://www.nodakspud.com/newstuff.htm McKay Enterprises lower sold by Nodak Spud. Very well made, $80 shipped. I just picked mine up from PK90 this afternoon, and an hour after i got home i have a complete rifle. Not bad for a first AR and first rifle for this noob.
-
FFID Question
Maybe these FIDs were issued before the digital prints were widespread?
-
AR pics, lets see'um!
Thanks for the info, Andy!
-
AR pics, lets see'um!
Hey Andy, how/where did you pin that SOPMOD....i'm trying to wrap my mind around on how to do it with mine for my AR build.
-
Hypothetical question regarding brandishing
Thanks for your answer, vlad. I totally get it.
-
Hypothetical question regarding brandishing
Vlad, is there a specific reason that you treat every unannounced visitor as a high threat situation? (it's hard to convey tone, I'm asking out of genuine curiosity and not judging)
-
Press Release for A3807
I still don't understand how this is "common sense" legislation. What is common sense about it? Less bullets = WHAT?
-
Fingerprint ON FID card
Stopped by at lunch, and the records dept helped me out.
-
Fingerprint ON FID card
This is Plainsboro PD, they were great in all other aspects. I guess what happened was they handed off to the dispatch office for me to pick up and never informed them that it needed to get printed. I'm stopping over there tomorrow on my lunch hour.
-
Fingerprint ON FID card
Roger that, thanks guys.
-
Fingerprint ON FID card
So i just got my initial FID from my local PD this week, and i realized that they never inked and printed my index finger for the back of the FID card. Is this an issue? Do i have to go back there to get it printed, or can i do it at home?
-
NJ FID application data collection effort
1. Application type: INITIAL FID + 2PP 2. Police Department where you applied: Plainsboro (Middlesex County) 3. Name of the person you dealt with at the PD: Det. Jason Conley, Karen in the PD/records dept. 4. Time taken to issue FID and/or permit: Just under 3 weeks 5. Documents required by the PD: Additional contact info form for Plainsboro PD. No additional info was needed; was basically to have my phone number etc for easy access when my FID was ready for pickup. 6. Notes: The application process was handled with 100% professionalism and neutrality by all of the staff at Plainsboro PD. Detective Conley gave me the form with the info for Sagem Morpho (fingerprinting service, digital) and suggested that i read the NJSP website for legal reference. Then he mentioned that it's a good idea for all firearm owners to go through a firearms safety course. The reference letters were mailed out by the PD the same day they received the FID application/payment. I received a voicemail stating that my FID + 2 PP were ready for pickup less than 3 weeks after my fingerprinting date. I REALLY have to praise the Plainsboro PD for handling this the way that they did; it was treated as a routine paperwork issue, like issuing a marriage license or registering a dog with the township. I was pleasantly surprised at the casual and welcoming attitude that all the staff had.
-
spikes lower
Roger that, thanks fellas. (didn't mean to thread-jack)
-
spikes lower
This is exactly what i wanted to do for my AR build. Does BCM do that for you, or did you have to have someone else put on the battlecomp? Their site only shows an A2 cage welded/pinned onto the 14.5 to make it non-NFA.
-
FID Change of Address?
Now, what happens if you wait longer than 3 months to change the address on your FID? Does that mean you have to re-apply all over again?