Everything posted by Rob_Photo
-
Handgun as a present....
Thanx. Yea, It's not like I'm buying a handgun then selling it to someone else.
-
Handgun as a present....
Anyone know weather is legal in NJ to purchase a handgun for my father as a birthday present? I'm aware I'd have to get the handgun permit first and he does have his FID card. Would I have to buy it, then wait for him to get a new pistol permit, then have if transfered?
-
Getting her broken in.
Yea, I was very happy. Hope to get out to SJSC tomorrow after work with some good ammo.
-
Getting her broken in.
It's the Burris AR 332, very nice optic and runs black off, or red/green on.
-
Getting her broken in.
Went out again last Fri to put some more rounds threw the new AR. Started getting some nice groups, considering that I'm shooting Tula @ 100yrds.
-
First day out with the new build
It's a Burris AR 332. Very happy with it for a $350 3x sight.
-
First day out with the new build
Took out my new custom Spike's build for a test run today. This was my first AR and decided to build it from the ground up. She ran perfectly and got her sited in at a 100yrds with some cheap Russian ammo. Looking forward to putting some good stuff threw her tomorrow.
-
Just about done my AR build
Storage/work room. Used some steel mesh, 3/4 in plywood then drywall outside wall and security camera's to monitor everything.
-
Just about done my AR build
Thanx, I decided to build a secure 4'x5' gun room/work room a few months ago.
-
Just about done my AR build
Yeah, the barrel has some serious weight to it. I planned on during more target shooting 100-300yd range. I think I'm going to start order another upper, handgard and pinned 14.5 light weight barrel too. I'll post some range photos after the weekend.
-
Just about done my AR build
Just waiting for a few more pieces to arrive. It was amazing how easy it was to put this thing together. Total build cost came in at $1090 also. Spikes upper and lower Spikes battle trigger Spikes LPK Spikes Zombie Killer door RRA froward assist Spikes Nickel Boron BCG BCM large charging handle Ace Skeleton Kit Magpul Miad 15/30 Pmags YHM Diamond FF and end cap Wilson Arms 16" bull barrel Midwest low pro gas block YMH gas tube Optics coming too. Burris AR 332
-
Spikes tactical LPK
Couple days, ordered it from an online vendor who had a couple in stock. Also just found another vendor with blemished stripped uppers too.
-
Spikes tactical LPK
I just built a spikes lower with the battle trigger. I aslo purchased the standard lpk with out trigger and hammer. It cost me $100 bucks shipped. I'm not sure compared to other ar's being my first, but my dad has a new dpms low pro. The spikes trigger is 100 times better then his stock one. I put on is upper and his ar shot better. The pull has no play with a crisp snap.
-
Zastava PAP Double Stack Conversion Zastava PAP Double Stack Conversion Zastava PAP Double Stack Conversion
No issues at all. She works like she came factory with the new mag. Ingages and dis-angages without any problems.
-
Zastava PAP Double Stack Conversion Zastava PAP Double Stack Conversion Zastava PAP Double Stack Conversion
I went a took a stab at doing the double stack conversion, I'm very happy that I did. Took a bout 5hr of dremeling a little bit at a time and fitting then re-fitting. I ended out with a perfect cut in the mag well with absolutely no wobble what so ever. As for the mag seating the front trunnion I did shave just a little off the front of the mag to get a nice tight fit and consistent feeding of the rounds. I also dremeled all the way across the feed ramp too. This is necessary in order to properly feed rounds from the double stack. I took her out for a test run on Sun and was amazed at how well she fired. I didn't have one jam or failure to eject threw the 100 rounds I put threw her. I've attached some photos of the process. I'm going out the weekend too, so I'll get some video also. http://robenglish.com/Zastava_PAP_Double_Stack_Conversion/
-
JUST GOT A ZASTAVA PMP... TEH HOTNEZZ!!!
I have some post of my Zastava on here with some photos for break downs and a couple mods.
-
Pimp my gun app.
This is a pretty cool flash based app to make a rifle with any parts. http://pimpmygun.doctornoob.com/app.php
-
Zastava PAP Feed Ramp Work
Same here. The bolt doesn't fully return to battery and the round is at a 45 degree angle. The case usually gets a nice dent in it too. I figured mine just needed a good cleaning. Thanks for the writeup. I had exactly the same issue, this resolved it.
-
Zastava PAP Feed Ramp Work
I had the same problem with the FMJ's, so I figured I just resolve the whole issue.
-
Zastava PAP Feed Ramp Work
If you follow threw the photos on the link, you can see it was a pretty easy job. I just used a dremmal with a fine grinding bit to take off and shape the ramp. I then used some 80 grit, then 120 grit sand paper to smooth out the ramp. It's kind of strange that this wasn't done from the factory too. If you also watch the vid of the cycling, I was shooting brown bear hp's without any problems. Went threw about 100 rounds too.
-
Zastava PAP Qual Rail Install
Picked up a UTG Yugo M70 Quad Rail for my PAP. Fit was perfect, I've attached some photos of the install. http://robenglish.com/Zastava_PAP_UTG_Yugo_M70_Quad_Rail/index.htm
-
Zastava PAP Feed Ramp Work
I had some feeding issues when I first got the rifle and noticed there was a feed ramp problem. So I decided to grind and polish a new ramp. I took her to the range and she shot flawlessly. Here's some photos. http://robenglish.com/Zastava_PAP_Feed_Ramp_Mod/index.htm
-
Zastava PAP photos and work.
I did some modifacation to my Zastava PAP stock today. I'm aslo planning on cutting and finishing the stock and adding nicer grip. I also just ordered UTG Quad Rail which I'll be installing this weekend too. I'll post some pictures on how that goes. I figured I'd take a lot of detailed photos of the entire gun too since there doesn't seem to be too much info on them. Also any links to some steel legal double stacks, please let me know, planning on opening the mag well. Here's a link to the photos. http://robenglish.com/Zastava_PAP_web/index.htm
- New guy from South Jersey