Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

hiker88

Members
  • Joined

  • Last visited

Everything posted by hiker88

  1. I know it's been asked before but I can't seem to find the threads. Who do you guys use? Work is to be done in AZ and I'm shipping out of East Brunswick. Thanks for the help.
  2. Great guy to deal with. Thanks again!
  3. Go for a bladetech. With the doh attachment, you can compete in limited 10. Without it, your good to go for singlestack.
  4. gone! This is made by S&B and runs clean. I bought a case of this a while back and I still have a box or two left.
  5. hiker88 replied to scohen2002's topic in Handguns
    can you post pics? also, take out the barrel and insert a round in the chamber. See if the round seats properly.
  6. I have a Hex Mosin that I'll be posting for sale shortly... was thinking of doing for the weekend.
  7. Get a Glock ...and a 92fs and then a CZ
  8. Congrats on the CZ! The only caliber conversion you can do with your SP01 is the 22lr conversion you can buy from CZ USA.
  9. Nice... But you need better grips
  10. It's considered an "assault" rifle. I'm sure the squirrels lobbied for the old Marlin 60 features to be legislated into the list.
  11. Marlin 60 is a semi auto. You're current configuration is not NJ legal. Try to give Marlin customer service a call and see if they have a tube "plunger" replacement that would limit your capacity to 15 max for 22sr/lr.
  12. Hello and welcome!
  13. As per my post earlier, the OP needed "Dawn". Thanks for the info, usnmars! I'll use your cleaning method next time I shoot my mosins.
  14. Hey BullzeyeNJ, you have the prettiest 1911 collection here in the forum!!! Maybe, we need to consolidate all your 1911 pics and put them in a separate section all by themselves.
  15. Then, RIA is a great choice. Good luck!
  16. It depends on your budget. I also own a RIA and has been running excellent after a brief break in period. There are plenty of good reviews out there. Slide to frame fit is tight and accuracy is excellent. The finish is typical of 1911's at around the $500 mark. If you're willing to spend a little bit more, you can go for an STI Spartan, Ruger SR1911, SA, etc.
  17. you need to add Dawn liquid soap.
  18. Ray Ray, you need to have your wife talk to mine
  19. My wife bought me my first safe... and my reloader. ...and when this whole ammo madness started, she asked me if I had enough until the supply goes back to normal.
  20. no real case guage I do use an extra 1911 barrel to check my reloads
  21. Thanks Pizza Bob!. I use my 45 acp's strictly for semi-autos. I just checked Hornady for proper crimping with just the bullet seating die. It appears that gradually screwing in the seating die body, you can apply a more aggressive crimp to the finished round.
  22. Thanks for the input, guys! Thanks!!! I just wanted to make sure that I'm doing it right.
  23. I've been reloading 45 acp on my Hornady LNL AP using Hornady dies. I have done so without using a crimping die. I have one but I don't have any station left to put it on. For those that reload using Hornady dies, have you ever found the need to take the extra step to crimp your reloads. I was under the impression that the bullet seating die of Hornady gives a sufficient amount of crimping already. Am I right? Let me know. Thanks! PS - so far my loads work and feed well on my 45 acp guns.
  24. hiker88 replied to dtown223's topic in Handguns
    The 1911 was never designed to be modular like the modern firearms that we have today. There may be parts manufacturers who advertise drop in components. However, from the little experience that I have, they still require some sort of fitting. I've replaced a couple of my 1911 triggers. The STI triggers seem to have the least fitting needed but I did some polishing on the bow for a smooth operation. The Wilson and Ed Brown aluminum triggers needed a good amount of filing (done slowly and checked for fit several times) when I used them. As far as hammer and sear replacement, I would leave that to a trusted gunsmith. Plenty of things that can go wrong there if you take too much metal or if you get the wrong angle on the contact points. My recommendation is, if you have access to a competent gunsmith, just have him do the work.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.