Everything posted by ronhonda
-
USPSA @ Topton PA 3/20/11
I don't run the matches there, but it will be a USPSA style stage with a rifle. You can pretty much run what you bring. After all it is PA a "free" state. Payout is based on how you place. So if 20 people pay $10. To shoot, that $200 is going to back as a payout to the shooters.
-
USPSA @ Topton PA 3/20/11
Bump for the edit.
-
NJGF Arms Race 2011
PICS!
-
Good powders for 9mm loads
A reliable source has informed me to try the following place for some reloading supplies, including N320. Ron Shirk Shooting Supplies Inc104 Golf Road LebanonLebanon, PA. 17046 717-272-5671
-
Good powders for 9mm loads
Not hard to find at all. Powder Valley has it for $91.00, check for availability. I have had a steady supply of it for the last 5 years. Also, order as much as you can afford (primers and powders) at the same time. Save on hazmat and shipping fees.
-
Good powders for 9mm loads
CCI are one of the "harder" primers on the market(not including wolf and whatever else comes out of the plant) My trigger work is more than just springs. The general consensus among Glock shooters is that you will run into problems using certain primers. I shot a match with Tula primers and out of the required 170 rounds(approximately) I encountered 27 light hits on my ammo. I am not saying that you will have problems, but the odds are against you.
-
Good powders for 9mm loads
1.140
-
Good powders for 9mm loads
VV N320 and titegroup are among the most popular in USPSA circles. Both offer same characteristics, but titegroup is a bit dirtier. I currently am using N320 at 4.2gr with a MG 124gr JHP for my production G17. A nice clean soft, and accurate load. Also you WILL run into primer issues with CCI in a striker fired gun with trigger work.
-
Fobus holster fit REALLY tight
Agreed! Buy something else.
-
USPSA @ Old Bridge 3/27/11
Nice!
-
USPSA @ Old Bridge 3/27/11
Just shoot the single stack. Also let's design a 1911 friendly stage?
-
USPSA @ CJRPC (Jackson) 3/13/11
Like some of the others have already said, $40 to join USPSA for the year and your 1st match is included.(also get the fantastic Front Sight magazine) You will still need to take the new shooter briefing as well. You do not necessarily need to join USPSA to shoot, but it will be $25 per match you go to and your classifiers will not count. As a member, you only pay $20 per match ($15 if you are a member of the club as well)
-
USPSA @ Tenafly Pistol Club Sunday 3/20/11
Match on 3/20/11 Arrive around 5pm to help with set-up Registration closes at 545pm, match starts at 6pm Link to club page with more info. http://www.trpclub.org/action.html
-
USPSA @ Topton PA 3/20/11
Match on 3/20/11 Dean and his crew at Topton (from my experience) has always put on some great USPSA matches. Not to far away (depending on where you live) Here is some info from their site; IPSC Matches are held on the 3rd Sunday of each month, year round, weather permitting. Setup begins at 8:00 AM, Registration closes at 10:30 AM, followed by shooters meeting and walk through. This is a volunteer sport. Setup and tear down help is needed. New competitors must notify the Match Director as early as possible to arrange for the required safety check. Club link: http://www.toptonfga.org/IPSC.html Edit This months pistol match will consist of 5 or 6 stages of pistol with a one stage rifle match. 10.00 bucks for the rifle match, 100% payout for rifle match. match is march 20th, sign up is at 10am set up is at 8 help os always appreciated, discount to those who help set-up and tear down. thanks dean
-
USPSA @ CJRPC (Jackson) 3/13/11
USPSA @ CJ on 3/13/11 You know the drill; Show up, help out, shoot the match, tear down, hang out, and go home and ponder on your errors for the day. If you are a new shooter be there no later than 9am and announce yourself loudly as a new shooter. Sign up closes around 9:40am Help is always needed in building the stages, so come early if you can. Any other questions just post them and we will try to answer them as best as we can.
-
USPSA @ Old Bridge 3/27/11
Match Sunday 3/2711(weather permitting) New Shooters show up by 9am. pre-register on www.obcats.com (sign up and watch for range conditions updates) Match should start by 10am. Any questions post them, someone will hopefully answer them. Below is a blurb from the website. OK, March is here and this will be the first match of the Spring. JMB's brainchild, the venerable 1911 was formally adopted for use by the US Military on March 29th 1911. We aren't going have any special prizes but we thought it be right and proper to have as many people shooting 1911s as possible. So break out your Single Stacks. Let's celebrate the 100th birthday of our favorite firearm with a Bang! As always, all divisions are recognized. Click HERE for the application. The application will go live on March 19th.
-
Reloading Sellier & Bellot 9mm casings
I have loaded 9mm, 40s&w, and 45acp SB's with no problems. Also for the record I have had no issues loading NT brass in 40s&w, but 45acp and 9mm are a ****.
-
Thank You
Nope. Just clean brass, grab enough for the case feed, shot of one shot, and away we go.
-
Thank You
Not enough, and when I run out of powder before the resupply.
-
USPSA @ Old Bridge 2/27/11
Marlon was the one whose gun left the ideal confines of his holster while moving with such extreme speed.
-
USPSA @ Old Bridge 2/27/11
Were you using an old betamax?
-
USPSA @ Old Bridge 2/27/11
raz-o, the stage that you and your partner made SUCKED. Other than that it was fine. I know the intent was to simulate firing underneath an automobile. But I wish you chose an SUV for your inspiration and not a Lamborghini. I looked like a weeble-wooble trying to shoot it with an AR.
-
Thank You
The primers are difficult to pop out when reloading. In 45acp, they are actually small primers instead of the normal large primer. In 9mm, they just will not de-prime. I hate reloading. I find it a necessary chore to facilitate my shooting. But this is really bogging me down. I have a 60 lb mail mail bin full of 9mm brass, so sorting by hand is not happening.
-
Thank You
A Big FUKIN Thank you to the nameless and faceless people that for whatever reason believe that by using Win clean or NT labeled ammo are helping the environment. Miserable day here at work. No sleep and annoyed. I have been loading ammo for the upcoming season and I have been running into MANY of the eco-friendly brass casings. My daily average of 600 rounds a day has been cut in half. Making it worse I have to reset the de-priming pin on the 1st station. Thank you, you misguided prick. FWIW, I am just venting a bit.
-
new load .45acp
Long ago when I 1st started reloading, I was using west coast bullets heads. They were also plated and shot fairly well. These days I use lead in my 45, but montana gold for 9mm and 40s&w.