Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

MidwestPX

NJGF Vendor
  • Joined

  • Last visited

Everything posted by MidwestPX

  1. Does it look like this? Barrel on the left was fired twice however the bolt wouldn't unlock due to the extension being out of spec. Barrel on the right is brand new.
  2. Pic of the discoloration? I'm with Vlad on this and thinking it's powder/residue.
  3. I actually threw that rifle together with spare parts (with the exception of the FCG) and it's bugging the crap out of me. It's not setup for a sling, no BUIS, etc. I'm gonna have to "steal" some stuff from work and build it right. I may also swap out the handguard for something lighter as the RIS II is kind of a porker (a really nicely constructed and designed porker).
  4. Thanks! I had a MK18 upper sitting around and figured I'd do something with it. The Mini4 can is nice but still loud indoors. There's definitely a big difference between it and the M4-2K.
  5. This one is kinda special, kinda not. Finished:
  6. I'd match the bolt to the carrier based on plating. Nickel boron is significantly thicker than phosphating while nitriding doesn't add thickness since it's a case hardening process so you may end up running into a stack up issue.
  7. The Odin barrel in my SPR build shot nice tight groups today. I'd say their 1MOA guarantee is legit.
  8. Having shot the midlength and intermediate back to back today, I can say that there is a difference in perceived recoil with the intermediate being softer. Not a huge difference but certainly noticeable especially since I went into the shooting session with a focus on recoil.
  9. Sending this upper out to get test fired by an independent third party. My eyes were starting to fatigue by the time I got to this and I was getting 1-1.5MOA.
  10. The biggest issue I have with rifle length SPR-type barrels is unless they are profiled correctly, they become more like DMR barrels than SPR due to weight. To me, an SPR should be a dual purpose rifle equally capable inside of 50 yards as it is at 500 yards and to do that, the balance of the rifle needs to be right. Too much material on the barrel makes it nose heavy and less handy at shorter ranges. I've got a friend who's building an SPR with a four pound barrel. I told him he's building a DMR and not an SPR.
  11. I'll be shooting a midlength and an intermediate today, back to back. My gut feeling is there won't be an appreciable difference in cycling. Both are Wylde chambers so I'll put .223 as well as full power 5.56 through them to see. Personally, I don't think there's a big difference between the gas systems on an 18" barrel the way there is with midlength vs. carbine on the 14.5 and 16" barrels. But that's just my subjective opinion without objective data. Reliability, IMO, is a function of gas port sizing relative to placement. A good example is 14.5" midlength barrels.
  12. The problem with a rifle length gas system is it adds weight toward the muzzle end which throws off the rifle's balance. This profile is an HBAR to the gas block then .75"-ish forward to fight that. I'm not 100% sold on there being an appreciable difference in cycling between rifle and midlength on an 18" the way there is between midlength and carbine on 14.5 and 16" tubes.
  13. I'm test firing these tomorrow. The spec list is pretty legit and I have relatively high hopes for them. Assuming these are shooters, expect to see them up for $199.95
  14. Thanks guys. A couple early designs just didn't work out the way I had hoped. Some designs weren't conducive to high volume production while others were cost prohibitive. I'm fairly confident in the new approach and as soon as new materials arrive on Monday, the design will be dialed in and prototypes sent out to be tested.
  15. Hopefully shipping production prototypes to testers next week
  16. Barrel-attached bipod though.
  17. Probably a Ukrainian-made AR15 pattern gun. That looks to be a first gen straight body 20rd 5.56 PMAG with a ranger plate.
  18. I don't believe they obtained one prior to going to market.
  19. Yeah, I've seen that but that's not Ares that was finishing lowers. They asked ATF about it and were shot down so they'd be pretty dumb to have gone down that road.
  20. Was Ares actually helping people finish them? I haven't seen any court docs to that effect.
  21. I thought there was an itemized list of what's not okay like you can't have the FCG milled out, FCG pin and selector hole locations can't be indicated, etc.?
  22. EP, the manufacturer, claims they make the plug first then mold the lower around it. So the empty FCG cavity never exists. The FCG holes aren't drilled however they are marked which my understanding is a no-no regardless of material the lower is made of.
  23. You're thinking in Free America terms though.
  24. I was actually in discussion with WOA about a custom 18" stainless barrel but when I saw Odin had the 3-Gun as an off-the-shelf option, I stopped pursuing it because the Odin was exactly what I wanted at a better pricepoint than I could have provided with a house-branded barrel. I'll get mine shot as soon as I can...Mother Nature needs to stop being a tempermental PMSing mad cow first.
  25. Personally, I could see the allure of finishing one just to say I did. But the guys buying them by the dozen make me go, "Huh?"

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.