Everything posted by vladtepes
-
Starting a new build
my main go to gun is a 14in mid length gas system gun with a quality red dot and 3x magnifier.. the gun performs strongly inside 100 yards.. and can put shots on man sized targets out to 300 (max I have shot it).. for me.. this is plenty accurate to enjoy paper punching at the range.. and run and gun style self defense shooting.. I am far from a great shot.. this is 75 yards with standard federal 55gr ammo while using the magnifier..
-
Sig brace everyone cries...
probably not? but if you make some modification to the gun.. that causes it to fire more than one round per trigger pull.. then yeah.. probably.. just like if you put an arm brace on a gun and use it as an arm brace.. you will likely be fine.. but if you put an arm brace on a gun to use as a stock.. then yeah.. you may have issues.. its funny that people are so annoyed and shocked by this... a company made a device to blatantly buck the system.. its not an arm brace.. we all know it.. its a stock.. made to look like something else.. and shortly there after the ATF gets a million letters asking over and over again if its legal.. coupled with the five hundred million videos on youtube with people showing how they screwed the tax stamp system.. and made SBRs... is any of this really a surprise.. the best part is a lot of these people live in free states.. if you really want a SBR.. just pay the stamp and use whatever stock you want.. its not like the brace is exactly cheap.. the "retail" price is listed as like $100 - $150... tax stamp is $200..
-
Starting a new build
great advice.. tell us what you want to do with the gun.. tell us what you liked and didnt like about other ARs that you shot.. budget as well.. and we can point you in the right direction..
-
Sig brace everyone cries...
good read if what was said was valid.. but its just a bunch of wishful thinking.. the breakdown of what they said is not even close to accurate.. they did not in any way say anything in that opinion letter about using it sometimes and that being OK.. they said the following.. if you are putting a sig brace on your gun to use it as it is intended.. then there is nothing wrong with the item.. its an arm brace.. and arm braces are not illegal.. if you are buying the sig brace and attempting to use that part as a stock.. essentially redesigning the gun from a pistol to a SBR.. it would require a stamp.. the letter is fairly clear.. it is touching on intent.. if the intent it to use it as it is designed.. then it is OK.. but if you are using it as a stock it is not... in the same way that duct taping an old shoe to the buffer tube and using that as a shoulder stock would require a stamp... people are getting hung up on the fact that the ATF is discussing use... but it really has nothing to do with that.. when you make a Sbr you are essentially getting a form for manufacturing a firearm.... the stance they are taking is that the AR pistol is a pistol... and if you add parts to it with the intention of shooting off the shoulder.. you are essentially manufacturing a SBR.. in the same way that a 16in carbine is not a SBR.. but if you put a 10in barrel on there it becomes one.. and requires a stamp.. an AR pistol is not a SBR.. but if you alter it to have a stock.. with the intention of being shouldered.. then you are again making a SBR.. and that requires a stamp..
-
Sig brace everyone cries...
I think that the point they are making is this.. the top curved padding of a crutch is NOT a gun stock.. but if you use it in such a way on a gun to create a stock.. then the gun now has a stock.. and is no longer a pistol.. just because the brace is not intended to be one from the factory.. if you misuse it and apply it to a pistol so that you can use it as a stock.. then it IS a stock.. "intended use" appears to be the issue..
-
Sig brace everyone cries...
I agree completely.. but I think one of the biggest differences is in most cases the buffer tube is necessary to the workings of the weapon.. and this is one of those situations where "intention" does matter.. the intention of the buffer tube.. is without question.. to contain the buffer.. the intention is crystal clear.. so shouldering it against that is somewhat less of an issue because the intention of the part would never really come in to question as the gun needs it to work.. the intention of an "arm brace" shaped almost exactly like a stock is somewhat more suspect.. especially when you have 500,000 videos titled "I beat the ATF tax stamp laws!!!!!!!!!!!!1111" "new legal SBR work around"... the intention of the item gets a little less clear.. I think I could find 200 videos of the brace being shouldered to every one where it is actually being used as a brace..
-
Sig brace everyone cries...
for once.. I am not sure I am with you on this one... in some peoples opinion... Sig made a brace that can be used to support your gun when shooting a heavier larger pistol... but in the opinion of some other people.. Sig made a stock.. so people could get around needing a stamp... so at the end of the day.. you could make a full normal AR stock and call it the "AR 15 pistol counter weight" and claim that its not a stock at all.. it is simply a counterweight for the gun since its kind of front heavy and unbalanced.. does that make it not a stock? I think if the gov really wanted to push it... they would simply push a case or two.. get some footage of the individual using it as a stock.. and then insert several thousand youtube videos of idiots talking about how they beat the tax stamp rules.. with videos of them shooting it from a shouldered position.. while I am not a fan of having to pay a stamp to build a smaller than normal carbine.. I kind of expected this for a while now.. I think that the argument they are making is somewhat valid in the following way.. you are taking a pistol.. and adding a block of plastic to the back of it.. if you then use that block of plastic as a stock to shoulder the gun.. you are essentially changing the gun into a SBR.. because it doesn't really matter what we call things.. if they serve the functional purpose of shouldering.. then could they not be considered a stock?
-
Sig brace everyone cries...
LOL
-
Sig brace everyone cries...
seriously.. I mean... when they first made them.. and got the ATF to kind of agree it was OK.. people should have just shut up and been excited at that point.. but nope.. everyone wanted their own letter.. and everyone wanted to put the arm brace on everything.. and get an opinion letter on that as well.. sometimes we wonder why we get screwed so bad.. maybe its partially because we don't know when to just accept a win and move on.. I imagine the market will be flooded with these things now that they are headed in the direction of not solving a problem.. I do admit that this IS only a SINGLE ATF opinion letter.. and we all know that they can change at a moment.. but ive been saying since day one with the obnoxiousness that these were being used .. that there would ultimately be push back.
-
Sig brace everyone cries...
If you didnt see this coming.. you know all those people that thought they could skirt NFA rule by buying an ugly arm brace and using it as a stock? doesn't look like thats going to work out well.. http://gunssavelives.net/gun-industry/breaking-atf-issues-new-opinion-letter-stating-that-shouldering-sig-brace-is-illegal/
-
Evil featured AR Barrel
I am not sure what you are talking about.. when I answer legal questions on this site I generally include the actual LAW that applies.. not my opinion.. not a guess (unless stated).. in most instances I am posting the LITERAL law.. and this is absolutely NOT what you will get at MOST ranges.. and MOST gun shops..
-
Evil featured AR Barrel
here is the real answer.. in detail.. if you have an assault weapon.. or the parts to make an assault weapon.. you are breaking the law and could be punished.. IF it will happen to you is not the question you asked.. sometimes I shake my head when advice is given on probability.. you asked if it is illegal.. and if you have an AR15.. or the parts to make an AR15.. AND have a threaded barrel for an AR15.. JUST the barrel.. by definition you are a criminal.. that is the actual answer to your question..
-
New Handguard has arrived - SLR
IMO hotter yes.. both get hot but the NSR pre covers felt a little cooler..
-
New Handguard has arrived - SLR
I have dealt with them directly and actually ran one of their handguards for a short period of time.. it was made well.. and mounted solid.. just got too hot, and covers were not easily added..
- Ruger
-
Ruger
I have have had hands on the follow and found them all to be fine (in that they appear durable.. holes line up.. etc..) spikes, aero precision, ar15.com, S&W.. but I am sure there are a million more mil spec lowers that are more than fine.. not to beat it to death.. but the point is not to say the ruger is bad.. the point is more that I think your money spent elsewhere would net you a better experience... is the upper OK? not sure.. does it shoot straight? what gas system is it? barrel length? are you looking for a lightweight run and gun setup.. or more of a benchrest precision type thing.. I personally prefer a 14in midlength gas system setup.. but that is just my preference....
-
Ruger
I would just replace the polymer lower and keep what you have... you are not really pointing out anything about the gun that you dislike? so no sense in replacing it? lol I only say replace that lower because I have seen SOME reports of things breaking over time... and lowers are dirt cheap at the moment..
-
Ruger
no.. I think that a rifle is a sum of its parts as applied to the person operating the weapon.. I have two home build ARs that shoot extremely well.. how well does the gun you own shoot? what doesn't it do that you wish it did? how does the gun feel? what would you change.. these are the things we need to know in order to give you good feedback.. I am sure the Ruger is an OK gun.. I just personally think that your money is best spent elsewhere.. is it the polymer lower? this is my home build.. on all kinds of different unmatched parts.. gun runs extremely well..
-
Ruger
IMO.. which is not worth much... a purpose built AR around YOU and YOUR style is going to be worth far more than an off the shelf gun.. if you are not overly pleased with what you have.. isolate the components you are not happy with and throw the $700 at those parts.. it will in theory net you the perfect weapon as it is built around YOUR likes and dislikes..
-
Ruger
piston driven AR is a solution to a nonexistent problem.. additionally the parts are proprietary to the system (normally) this means that as time goes on.. and things need replacing.. they MAY be readily available.. or may not be.. why are you considering a piston AR?
-
Baofeng UV-5R or other brand.
if you mean me? no not at all.. I am simply using it as a "scanner"
-
Baofeng UV-5R or other brand.
i just got a UV5r for 20 bucks used from a coworker... I dont know anything about these things.. I am simply using it to listen to local PD.. appears to work well enough for that?
-
FREE FLOAT FOREND
good luck with reusing the brake.. I just did this twice.. and I ended up cutting the brake off.. it was shit.. pick a handguard you REALLY like and go for it.. you can cut the A2 front sight to fit under a free float.. both of my Noveske NSRs have shaved A2 sights under them.. and that handguard is tiny..
-
Ejuice discussion and exchange
Lemo Drop purchased... this thing is awesome..
-
Yet another is this stock legal thread
that is debatable.. the PRS is a FIXED stock.. with an adjustable cheek rest and butt plate.. the PRS has a clearly defined stock that does NOT move.. this on the other hand.. IMO.. less clear..