Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Recon Racoon

Members
  • Joined

  • Last visited

Everything posted by Recon Racoon

  1. Where does it say that? Serious question, I don't remember seeing that.
  2. Wouldn't smooth bore, black powder cannons fall under 12K Ft lbs also?
  3. 20mm Lahti Anti-Tank rifle, 20mm Anzio Iron works bolt action rifle, 12.5x157mm Russian, and rail guns*. Seriously. Rail guns can achieve 12,000 ft lbs like its nothing. Problem is, they don't really exist outside of lab environments. And those need to be replaced after every shot because of blowback on the circuit.
  4. Your NICS will be approved the day you move out of the state. JK. Maybe NICS lost your paper work? Maybe call and ask if you've been approved?
  5. I can look into header paint. The forge shouldn't get any hotter than 2000 any way. Hopefully Advance has it and I won't have to go traipsing all over to find it. I'll hit the local hardware store tomorrow if it isn't a shitty day out. Worst case is I order some Mcmaster, and get a fire brick with it too.
  6. The one thing they didn't seem to have (I probably didn't look hard enough) was satanite. Its a ceramic super-high temp paint that can operate from -5 to 2400 F. They had similar refractory coatings, but they were realllllllly expensive for my application.
  7. N2BRK: I'll let you know. I shouldn't need anything to large, just enough to insulate like a paint can. All I really need it for is heat treating small pieces of steel. I totally forgot about Mcmaster-Carr. I'll check them out, hopefully I can get everything from there in one shot for cheap.
  8. I made the decision to not shop from there when I was talked down to. This just cements that even further now. I wonder what it feels like for Millers to get pounded like this? I mean this only really happens in XXX movies.
  9. Anyone know where I could find rock wool, or iso wool or anything like that? I'm thinking about building a small propane or MAPP forge and I want to see how much I'm going to need to build it. I found some rock wool insulation on home depot's website, but I'm not sure if its the right stuff.
  10. I just paid 70 for my pick up. I just stuck everything into a plastic bag the plates came in. If I want to laminate ill use the one at the firehouse.
  11. Me and some friends are talking about going camping in May. What are some good places to go that aren't like camp grounds (ex. we don't want water or electric near us). General travel time would be preferable if its under a two hour drive.
  12. It had better have been an intact Type 44 Cavalry Carbine or Type 1 Naval Rifle. For that price it had better be trimmed in gold, and blessed by the pope.
  13. Heavy gusts of wind. Had a minor building collapse in Pennsgrove on the corner of Main and S. Broad st. D side wall of an abandoned building fell on a car, And hit the convenience store next to it. As far as I know 1 person was brought out through the front window. As far as rain we have a good spatter going.
  14. Home Depot has a Lumber Distribution Center up here just on Center Square Rd. They always seem to be hiring.
  15. Then you can start wearing a t-shirt that says 'Free Mustache Rides'. Also for pick up lines: Start out with ' Do you know how much a polar bear weighs?' If she says no and follows up with how much, get her with 'Just enough to break the ice...Hi, I'm Matt'. Cheesy shit like that works sometimes. Good for a chuckle and should start a conversation.
  16. I have the same problem Kaiser. You just really have to get past it and go for it. Easier said than done right? NickJc is right though. Sometimes you get shot down, you just have to get back up again and try again.
  17. Fort Myers is also not exactly the most conservative part of Florida. Lived there for a year and there were more New Yorkers (from the city) and Bostonians there than you would think. So this suspension isn't much of a surprise. They're just doing it to cover their asses to avoid lawsuits. Hopefully the kid comes out clean, but it really depends on the school administration.
  18. The Terror Watchlist bill will be peanuts if more than one bill is passed from that packet of laws. I'm not really a fan of Christies. He tries to do whats best, and I can't blame him for that, but he's made missteps. If any combination of these bills pass, it'll show how he really thinks...like a politician only looking out for himself.
  19. Instructions not clear enough, genitals caught in ceiling fan.
  20. NJ laws only apply in NJ. If you press the button in PA, its yours. Just don't sell it unless you register it with the ATF first.
  21. IT IS NOT LEGAL TO FINISH AN 80% LOWER IN NJ!!! 2C:39-1 Definitions 'Manufacturer means any person who recieves or obtains raw materials or parts and processes them into firearms or finished parts of firearms, except a person who exclusively processes grips, stocks, and other non metal parts of firearms. The term does not include a person who repairs existing firearms or receives new and used raw materials or parts solely for the repair of exisiting firearms. 2c: 58-1 Statutes Every manufacturer and whole sale dealer of firearms shall register with the superintendent as provided in this section. No person shall engage in the business of ot act as a manufacturer or wholesale dealer of firearms or manufacture or sell at wholesale any firearm, until he has so registered. Applications for registraition shall be made on such forms as shall be prescribed by the superintendent, and the applicant shall furnish such information and other particulars as may be prescribed by law or by any rules or regulations promulgated by the superintendent. EAch application for registration or renewal shall be accompanied by a fee of $150.00. The superintendent shall prescribe standards and qualifications for the registration of manufacturers and wholesalers of firearms for the protection of public safety, health and welfare. He shall refuse to register any applicant for registration unless he is satisfied that the applicant can be permitted to engage in business as a manufacturer or wholesale dealer of firearms without any danger to the public safety, health or welfare. The superintendent shall issue a certificate of registration to every person registered under this section, and such certficate shall be valid for a period of 3 years from the date of issuance. Sources: http://lis.njleg.state.nj.us/cgi-bin/om_isapi.dll?clientID=22084864&Depth=4&TD=WRAP&advquery=2C%3a39-1%20%20Definitions&headingswithhits=on&infobase=statutes.nfo&rank=&record={1A38}&softpage=Doc_Frame_Pg42&wordsaroundhits=2&x=34&y=12&zz= http://lis.njleg.state.nj.us/cgi-bin/om_isapi.dll?clientID=22084857&Depth=4&TD=WRAP&advquery=2C%3a58-1.%20%20Registration%20of%20manufacturers%20and%20wholesale%20dealers%20of%20firearms&headingswithhits=on&infobase=statutes.nfo&rank=&record={1BA9}&softpage=Doc_Frame_Pg42&wordsaroundhits=2&x=34&y=10&zz= If you manufacture without a license, then you're taking your freedom into your own hands. If you get caught, tough shit. And anyone that recommends that you KNOWINGLY break the law, is not your friend.
  22. Yes. And the work to convert it to fire real ammo took like 5 days, and a team to get it to work. It fired one shot before it blew apart from chamber pressure. Guess Pot Metal doesn't make a good material when handling pressure...
  23. Define good. Right now, for decent shape: about 100 dollars from certain websites. Maybe more if you have a model thats rare and has something awesome about it.
  24. And don't forget the squirrels' lives that'll be saved because of it.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.