alec.mc

Time to move to revolver division, ADs are pretty much impossible

So it shipped out from them? Typically around the holidays UPS / FEDEX get a little slower with all the online christmas shopping.

I'd be interested in getting a price on the following: Qty 4 : 10" Circles Qty 5: 12" Circles Qty 4: 18 x 24 Rectangle , if there is any way to cut it out of a corner No hole needed to be drilled for mounts in mine.

Oh, no. Not unless you buy an extra 627 cylinder, so you'll have two. Keep your factory 38/357 with the gun the extra cylinder send out to convert to 9mm, and then you'll need to have a gunsmith time the new cylinder to the gun. IMO , all this - not really worth it. your going to be spending big bucks, for no good reason.

i think the conversion will cost you around 300 bucks. What do you mean by " true convertible " ?

Nothing factory, you could always send your cylinder out to a shop that specializes in conversions, and can convert your 38/357 cylinder to 9mm Check out Pinnacle customs & tk customs

You cray cray , boo.

The line set is the copper lines that connect the evaporator and condenser ( inside/outside unit) to each other that carry refrigerant between each other

you'll pay a little less if you can find a cooling only unit ( no reversing valve for heat ) Though, i'd spend the money on an inverter unit, they can modulate a bit with BTU output and have some nice energy saving modes, as well as some "dehumidification " modes. Though, whatever you decide to go with, make sure size it properly by doing a Manual J calculation. " Bigger is better " when it comes to HVAC is NOT a good thing, an over sized a/c unit will be short cycling on and off and not de-humidify properly, leaving you a clammy room.

Jimmy, you lazy ass... just click the link RTSP hosts USPSA matches on the 3rd Sunday of every month. Matches will include 4 stages (3 field courses / 1 classifier), and will require approx. 100 rounds. Match check-in is 5pm, and stage setup begins following check-in. Pre-match shooters meeting is 6pm, and completion is targeted for 10pm.

I'll second all of Bob's posts, Everything was spot on in my opinion. Oil it, and put it in the back of the safe until prices double,then sell it. Pick up a beater 686 or something for putting the miles on.

If you like the smaller frame (K/L) and really want the 9mm, it's a good choice. Cons: 7 shots, pretty much useless for competition , and you'll have a smaller selection of moonclips Why do you want the 2.5"-3" barrel so bad? CCW? If you want to make it work, cut that 5 inch barrel down to 2.5 inches.

It's one thing to go out seeking them, it's another when you are scrolling down your Facebook feed and you see a large picture of Daryl holding beths lifeless body with big bold *RIP BETH* at the top.

Havent seen the episode yet, but the walking dead facebook page threw out a giant spoiler yesterday and ruined for people who didnt watch yet, and the entire western united states.

No problem, Nice to meet you. The match was great, The Man VS Man side matches are always a blast, I took 3rd overall, with a close run for 2nd. And the weather was perfect.

Well, The new smith 9mm variants ( 929/986 ) are nice for the guy who wants to get into revolver and doesn't want to start investing in additional calibers. It sounds like you are already setup in 38 in the ammo department. So it MAY NOT be a good transition to make over the standard 8 shot .38 S&W 627 models. (If you are interested in 9mm because of the competition aspect with faster reloads due to shorter cases, look at buying some .38 short colt cases, they are the same dimensions as 9mm, but they have a rim on them. You can use .38 short colt in any 38/357 revolver, with or without moonclips with zero modifications ) Unlike the 38 variants (627)...You also NEED to always use moonclips when using the 9mm series of revolvers. This can be a pain when at the range and just wanting to dump some rounds and the cylinder for plinking, everything needs to be clipped. The 929/986 are still new to the market, have their quirks, and issues. They are also extremely hard to find ( more so the 929 currently ) and are pretty expensive. Now the good, The best thing the 929 has going for it is its specs at the price point. It already has a 6.5 inch barrel, and titanium cylinder. I built a custom 627 to those specs and spent significantly more.

What's wrong with the apple airport security ?

He was there right after me, probably around 830 or 9 pm There BF sale started Thursday afternoon I think

I'll try to compare logs, at this point I'm ready to buy an airport extreme or something easy plug and play.

woodbridge dicks has stock too, no line

The modem is a Motoralla. old router = MediaLink new router = Asus I just copied and pasted what I saw, i've been flipping back between the medialink router and asus just so I have internet access in between troubleshooting.

Just left woodbridge dicks, no line Had a bunch of federal 22 525 bricks, and a ton of Remington bricks 1 brick per day 1 federal bulk pack $21.38 after tax

all firmware up to date Here are the router logs: texNov 28 00:55:30 watchdog: start ddns. Nov 28 00:55:30 rc_service: watchdog 367:notify_rc start_ddns Nov 28 00:55:30 rc_service: waitting "restart_wan_if 0" via wanduck ... Nov 28 00:55:32 openvpn[803]: OpenVPN 2.3.4 mipsel-unknown-linux-gnu [sSL (OpenSSL)] [LZO] [EPOLL] [MH] [iPv6] built on Nov 20 2014 Nov 28 00:55:32 openvpn[803]: library versions: OpenSSL 1.0.0o 15 Oct 2014, LZO 2.08 Nov 28 00:55:32 openvpn[803]: Diffie-Hellman initialized with 512 bit key Nov 28 00:55:32 openvpn[803]: Socket Buffers: R=[118784->131072] S=[118784->131072] Nov 28 00:55:32 openvpn[803]: TUN/TAP device tun21 opened Nov 28 00:55:32 openvpn[803]: TUN/TAP TX queue length set to 100 Nov 28 00:55:32 openvpn[803]: do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 Nov 28 00:55:32 openvpn[803]: /usr/sbin/ip link set dev tun21 up mtu 1500 Nov 28 00:55:32 openvpn[803]: /usr/sbin/ip addr add dev tun21 local 10.8.0.1 peer 10.8.0.2 Nov 28 00:55:32 openvpn[803]: /usr/sbin/ip route add 10.8.0.0/24 via 10.8.0.2 Nov 28 00:55:32 openvpn[810]: UDPv4 link local (bound): [undef] Nov 28 00:55:32 openvpn[810]: UDPv4 link remote: [undef] Nov 28 00:55:32 openvpn[810]: MULTI: multi_init called, r=256 v=256 Nov 28 00:55:32 openvpn[810]: IFCONFIG POOL: base=10.8.0.4 size=62, ipv6=0 Nov 28 00:55:32 openvpn[810]: Initialization Sequence Completed Nov 28 00:55:32 ddns update: ez-ipupdate: starting... Nov 28 00:55:39 WAN Connection: Ethernet link down. modem logs Cable Modem Reboot due to power reset ;CM-MAC=38:6b:bb:15:a6:5b;CMTS-MAC=00:01:5c:6c:72:49;CM-QOS=1.1;CM-VER=3.0; No Ranging Response received - T3 time-out;CM-MAC=38:6b:bb:15:a6:5b;CMTS-MAC=00:01:5c:6c:72:49;CM-QOS=1.1;CM-VER=3.0; MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1;CM-MAC=38:6b:bb:15:a6:5b;CMTS-MAC=00:01:5c:6c:72:49;CM-QOS=1.1;CM-VER=3.0;

yes, the actual wireless connection to the router never goes away, it's the internet cable modem that kicks off and reboots.

smart ass