Everything posted by M4BGRINGO
-
Man vs Man Steel Match CJRPC April 29th
Don't worry, Ray Ray is harmless unless he has a gun in his hand.
-
Man vs Man Steel Match CJRPC April 29th
You can still come and shoot Ray............
-
Man vs Man Steel Match CJRPC April 29th
Kinda sound like Drag Racing, cool!
-
Saiga 7.62 project
Found the problem. The hammer would not go down far enough to let the piston (or bolt carrier?) slide forwards because the screws that came with the new trigger gaurd were too long. Couldn't see it last night, but today I could see the slight marks left my the end of the screw on the bottom side of the hammer. Shortened the screw and now it goes together smoooooothly! Thanks guys, hopefully when I load it and pull the trigger she still works!
-
NJSP escorted race to AC?
Yes, things can go wrong very quickly for sure. I'm not standing on the brakes at 100mph, or 80mph for that matter, on a public roadway. IF someone flies-up on my a** and I am already going 10mph over the limit, they probably will not like my reactions. If they have others in the car, then those people should have warned them about their driving beforehand. Police should be DRIVING with the traffic, not sitting reading magazines and once in awhile look-up at their radar units.
-
Got myself a present
I have a few permits so I took a ride to my FFL and as usual left with a new gun. I bought your guns "Big Brother", the 1911-22. I have a .22 revolver and wanted a .22 semi of some sort. Seems I never leave his place empty-handed.
-
NJSP escorted race to AC?
Tired of people that think they can get-away with anything they feel-like because they are either "connected" or think their money is greener than mine. Instead of cops sitting clocking people they should DRIVE with traffic, much more usefull. I'll take my chances with my truck, no one else in there with me. A new hitch and bumper is cheap, especially when the other a-hole is paying for it.
-
NJSP escorted race to AC?
Hmmm. And just how is that going to work in this situation? Call the idiots to report the idiots (same idiots) that are condoning this illegal activity? I can hear the NJSP laughing about the phone call now..... Lucky for them I wasn't driving along there. I have been known to brake for unicorns crossing the road. Try to prove otherwise that I wasn't braking for an animal, after-all, the animal got off the road and out of harms way because I braked/swerved to miss it! I perform the same services for the morons that think the little gold shield on their dashboard gives them the right to weave in and out of traffic. My word against yours and 99.99999% of the time, you rear-end me, you are getting the ticket!
-
Saiga 7.62 project
Less force, not in my nature............. You should see my 2-piece upper hand gaurd............. Tried to twist it into place, twisted it into 2 pieces......... Had to sand a LOT off of the pieces to get it into place. Actually went where it belongs, extremely tight, can't even see where the wood is split. Also had to file some off the end of the gas tube to get that to lock into place. This gun reminds me of my race cars. Takes-up a lot of time and a pain in the a**. In the long run though it is a LOT of fun!
-
Saiga 7.62 project
Ok, now I am stuck again................. Can not get the piston/bolt back in place. If I turn the piston upside down it slides all the way in. Turn it back to where it belongs the bottom of the piston assembly gets stuck on the top of the hammer. The hammer won't go down far enough to let it pass. If I release the hammer I can get it to slide further forward, until the piston assembly hits the hammer. What am I doing wrong? This is all with the firing pin assembly (or whatever it is called) not even in there. One more thing, is the firing pin floating or spring loaded?
-
Handgun as a present....
If you were 18 in 1977 and it is now 2012, that makes you................................ OLD! Darn, but you can still outshoot me.
-
Saiga 7.62 project
Thanks Glen, I kinda thought that was where it would go. What was there before on the original parts?
-
Saiga 7.62 project
Ok, I see where that plate goes, but what about the spring that looks like it came out of a ball point pen?
-
Saiga 7.62 project
James, I was bored today so I ripped-apart my other Saiga to do the conversion. Everything went well except I have no clue what to do with the Axis Pin Retaining Plate and the Disconnector Spring. I can move the hammer back, it latches into place, and then release it with the trigger. The Safety Lever also works correctly. I did not put the BHO back in, I never used it except for when cleaning the gun.
-
shotgun video pump vs semi
Cool, time to check Gunbroker. Just sounds like too much fun to be missing out on. Old farts like Dave probably did this when I was still in diapers.
-
shotgun video pump vs semi
Isn't there a way to "modify" a pump so you can keep the trigger back and actually fire the gun each time you close the action?
-
obrams at Old Bridge sat. the 21st!
There are a LOT of baffles. Furthest from the shooting line is done 100%. Have a lot of the others ripped-apart, many just have the steel plates hanging. Was a TON of work, dusty doesn't even come close to describing it. Soooooo many bullets up there, besides brass. Will be doing more work on them in May on Saturdays, could get lucky with just one more day to finish. Trying not to inconvienence anyone, but it will happen. Any leagues or events scheduled will not change though. Looking really good!
-
Old Bridge USPSA 4-22-12
Good day for KNOCKDOWN STEEL!!!!!!!!!!!!!!!!!!!!!!!!!!! Can't let it go to waste!
-
Range or club in south Freehold?
Where is this? I grew-up kinda in that area and know a lot of it. What side of Rt9 is it on, towards 537 or towards Wall?
-
obrams at Old Bridge sat. the 21st!
Rich said there were 5 squads and over 40 people at the event today, nice! Indoor range project still-going, what a mess! Got one baffle done so far, lots of other junk ripped-out. Need another dumpster or two! Looking-good though, hopefully people don't start shooting it up on us.
-
obrams at Old Bridge sat. the 21st!
Harry, we will be working 9 to 5 on the project, they would like to get it done in one day. Gonna work more there than I do at my shop!
-
obrams at Old Bridge sat. the 21st!
Still have the 617 Ray Ray, don't fret. Gotz PLENTY of revolvers too. I am ripping apart the indoor range tomorrow fellas, you all have fun shooting, I'll be replacing the ceiling.
-
obrams at Old Bridge sat. the 21st!
I just bought a new pea-shooter I can try out next month in this event, Sig 1911-22. Kinda cool frame, hope it works nice.
-
This Sunday at OB
Nice, Alec beats me with my own gun............. Good job dude! Too bad Ray Ray didn't tell me about the lever on the side of my carbine, would have done much better if I didn't turn the gun upside-down for half the day to close the action. Anyway, I did better than I expected to, next time I know how to use the damn gun!
-
S&W 625 - JM/PC ?
Ok, I'll let you have the ammo for what I paid, I have PLENTY!