Everything posted by M4BGRINGO
-
S&W 625 - JM/PC ?
Free, just supply the ammo. You'll shoot them better than me anyway, just like the 629. Wish I had younger eyes......
-
S&W 625 - JM/PC ?
Alec, my 626 is plain-jane, not a PC nor a JM.
-
S&W 625 - JM/PC ?
Yes, the 610 does .40 Short and Work plus 10mm.
-
DAO/SAO?
His name is Matt, where he works I do not know. He is a very good shooter. Indoors that gun makes cool rings of fire!
-
S&W 625 - JM/PC ?
I have to look at my 625 Alec, I am pretty sure it is a 5". One of two revolvers I own that have the lock. Never had an issue with it, but it doesn't get a lot of range time because of the ammo cost. Used it for knockdown steel once, it had no problem moving the plates! Used it once indoors for PPC, was using SWC's and they smoked-us out! Never used them indoors again! My favorite revolver is my 610. I use that one a lot. I shoot .40 S&W with moonclips through it, much cheaper to shoot than the 625.
-
DAO/SAO?
Thanks Bob. The fella that shoots with us is an LEO, maybe that is how he was able to acquire the gun.
-
DAO/SAO?
Ian, what is the reason to buy a DAO Sig P229 instead of a DA/SA P229? One of the guys at our club has a DAO P229 that he uses. I could see that having the same exact trigger pull may be an advantage instead of a long first pull then a short second thru last. It functions more like a revolver in a way (unless you cock the hammer on the revolver then put it in your holster, that is something I would never do!). Are there any safeties on the DAO P229 or is the safety the long trigger pull?
-
POI Question Concerning a Scoped Rifle
I was watching a show on TV once that showed sniper shots by our military forces. In one of the scenes the sniper took a shot but the bullet actualy impacted a wall similarly to Daves post above. The scope was on-target, but the barrel was just below the top of the wall they were shooting behind. I had a similar experience as the OP did. I had a red dot on my little Ruger 10/22, was perfect at 25 yards. Did OBRAMS with it one day and found I had to shoot about 6" high for targets about 7 yards from me to actually hit where I wanted to. I didn't want to mess-up the adjustments I had set for 25 yards since that is what I normally use it for.
-
Showing a Rifle
Well-past time to move.
-
Driver took wrong turn into Mexico with 268k rounds of ammo..
if you want the driver of the truck back, the ammunition is here! Is that the correct translation? I am called a Gringo for a reason, I don't know Spanish, No Comprende Senor corte de pelo de cobarde ......
-
I have the ID card but need new permit
Minimum of $18 for backgroud check again, $2 per permit, gotta have the hubby do it also. You can't buy him a gun. You can pay for his gun if he has a permit. This state is rediculous! I bought ALL our handguns, some under the wifes name, I can't use them without her being there. I will be slowly transfering the guns she doesn't want to my name and burning-up some permits to do so. Did I say this state is REDICULOUS!
-
West Deptford Area - Last Night What Was Going On?
Ray Ray heard they were giving away the new Keltech KSG's at the Deptford Mall and got there too late...................
-
This Sunday at OB
DAMN! Quoted for truth! Nick, I was going to ask you about that stance, but the fact that you were hitting targets with practically no misses, well, who are we to complain. We certainly will make fun of you though! Looked like a strong gust of wind would have knocked you on your a**, or my Saiga!
- Driving on route 3
-
Media Matters going after the NRA??
Ha, that's a hell of a way to look at it! While assassination is illegal, getting rid of that moron just gives us one that is worse. Almost a no win situation. Well, almost, Biden would never get elected................
-
Showing a Rifle
My neighbors know what I have. They have also seen me carry two shotguns at a time over my shoulders to clean them in the garage. I also have everything in safes, not worried about someone breaking-in. Dead end street with several retired people that sit around all day long watching time go by, they don't miss a thing! I would rather see the stupid "transfer" laws corrected before we ever get CCW in this state. Unfreaking real that I can't take a handgun purchased with a permit bearing my wifes name to the range without her being with me. Guess having 10+ handguns purchased with permits bearing my name just isn't good enough. I take my chances from time to time but make sure she is only a phone call away.
-
Kel-Tec KSG
Did Ray Ray signup on The Firing Line as dajerseyrat? I want one of these guns once they work right, just for the fun of it. Same reason I have my Saiga-12, just for the fun of it (and Knockdown Steel!)
-
This Sunday at OB
Good job Alec! Where is the video of me clearing the shells in the Saiga banging it on the table? Bet your camera was bouncing a lot then!
-
Kel-Tec KSG
http://thefiringline.com/forums/showthread.php?t=485377 This guy doesn't seem too happy with his: I can tell you this much about the gun, dont buy it. I waited months for mine and recently took delivery of it and as any excited boy with a new toy would do,I cleaned it and I went straight to the range. First Impression,it looks cool and that’s where the good impressions end. Kel Tec should have waited till the design was complete and bug free before releasing any of these weapons to anyone. The gun is very awkward almost to the point of difficult to load and you will most likely cut your finger doing so. Now imagine trying to load this thing in the field under high stress situations. I dont see how it is possible to combat load a round into the chamber without turning the gun upside down. The magazine selector switch is very hard to manipulate from right to left on my gun and would need to be in the neutral position to attempt a combat load, which is one more extra step which would most likely get you shot in the face in real combat.. Chambered and fired first round, and racked it back only to encounter a double feed jam! The gun failed to extract the spent shell and attempted to load not 1 but 2 additional rounds at once, so a total of 3 rounds were stuck in there, leaving me with a 26″ long baseball bat to defend myself with. This type of jam is simply impossible to clear in a combat situation and would have cost me my life. It takes several minutes to clear the jams once they happen. I fired another round and it did the same exact thing. In fact the first 6-7 attempts the gun jammed the same way. Thinking it was me possibly limp wristing the slide, I allowed 4 other colleges to attempt to shoot it and it did the same thing for all 4 of them, including one range master/fire arms instructor. So it was not me. Now I am far from a gun expert, but I have been in law enforcement for over 15 years and qualify 2 times a year with our shotgun and have put thousands of shotgun rounds down range and never once had a shotgun jam on me. I notified Kel-tec who told me they wanted me to return the gun which keep in mind was just purchased a day or two prior, and would send me a call tag and take a look at it when they get a chance. That was over 4-5 days ago, no call tag, no returned email or phone call. I fired the gun several more times since and the gun now religiously jams on me at least once out of every 10-15 rounds. To make things worse I attempted one more time today to shoot it utilizing a forward pistol grip which subsequently broke 2 teeth of the rail within the first 3 shots…. Kel-tec stated this gun would revolutionize the industry, and if by revolutionize they mean get a ton of people killed, then yes they are doing it. At this point I fell that Kel Tec is utilizing people like me to do their R&D for them while making big money on markups. The design is really stupid when you look at it in detail and how the rounds are extracted and rechambered via one exit which increases the jamming probability much more than a side eject. The extracted round has to pass downward past the rounds in the magazine, then a new round needs to be fed upward. In my opinion this X-crossing effect is a poor design prone to failure and jamming. There is no way this gun would ever stand up to the abuse of actual combat performance either for police or military. Save your money and buy a real shotgun this thing is a video game cool looking novelty, and I dont predict Kel Tec being around the marketplace much longer with failures like this weapon.
-
Magazines that hold more than 15 rounds
Do you like that gun? I checked one out but didn't like the checkering of the grips too much. I really would like a double stack .45 ACP, I haven't totally written that gun off yet.
-
Gas Promblems Anyone?
Depends what I eat. Spicy food in equals interesting smells out.
-
This Sunday at OB
I sent John S an email asking how to go about getting more of these Knockdown events during the year. I would love to see one per month. I know there is a TON of setup/breakdown time involved. Great way for people to earn work hours, there aren't a lot of those available to most. I would do the breakdown, but I'm not a morning person so forget about me helping with the setup.
-
obrams at Old Bridge sat. the 21st!
I did this event a year ago. Iggy took me to an open pit and had me shoot 10 rounds into the berm, reload, shoot another 10 rounds. Just wanted to make sure I knew how the gun worked, that I knew how to safely drop and change mags, and knew how to handle the gun. He was also nice enough to loan me some mags for my Ruger 10/22 that were much easier to swap-out compared to the mags that came with that rifle. Anyone using a rifle should get there early or sight-in their guns during the week if you have optics on it. I had a red dot on mine and found that on some of the close targets (less than 10 yards) the gun was way off. I had sighted-in the gun for 25 yards. It is a really fun event and cheap to shoot! I would be there except I will be at the indoor range replacing all the overhead wood that has been shot-up over the years. Have fun people!
-
This Sunday at OB
JonF, I felt I did ok with the carbine AFTER Ray Ray showed me to use the lever on the side of the gun to release the action. I hadn't used that gun much, still learning. Anyway, I was kinda pizzed when I missed a shot. I felt that I should always hit a target when the dot is on it. My problem is that I am a shotgun gun and we NEVER stop the gun moving when we pull the trigger. I had to force myself to stop on the plate when pulling the trigger! Now you were VERY fast with iron sights. You had some runs that I thought were quicker than mine. We'll see when the scores come-out. Elvis, clean that gun! When it worked you were WAY faster than me! I finally beat you, but it was due to equipment malfunction, not shooting skill. I'll take it though! In Drag Racing we have a saying: "I'd rather be lucky than good!"
-
This Sunday at OB
Alec, glad you liked the Saiga. Don't know why I had issues with it and you didn't, but I will take it to the range sometime and see what I am doing wrong. Never had problems before. I put 50 rounds of #00 buckshot through it one day to break it in, that was a blast, and expensive! I had my niece hand me mag after mag. Gun gets heavy after awhile.................... My shoulder didn't care though! BlueLine (forgot your name already!), just keep at-it. I am sure our competitions are different than police qualifiers (though I never did one of them).