Everything posted by T Bill
-
uppers; buy or build?
http://www.arpartsfinder.com/
- New pistol caliber carbine
-
Do we have a count down for Christie?
Given his background, he fits right into the mold. A trial lawyer by trade, he knows how to "wait for it". As a former lobbyist and US attorney, he has learned the game from the inside much better than most. Does he have national inspirations? I think so. To what goal I do not know. President? Not so sure about that one. Is he going to Washington? You betcha. I think he's looking to be a government bigwig. More like a Secretary of a Department or along those lines You can't play in the national stage and not be beholding to the ones that back you. You have to keep your options open in politics and he is doing just that. I guess we shall see shortly. He wants and needs a big win in this election. It's not whether he is going to win, its about how big a margin he gets. The bigger the margin the bigger he looks on the national stage. (HAHA pun there). That is why all the critical bills with national implications are still sitting on his desk. Gun reform, Marijuana therapy for critically ill minors, etc.
-
Shed Base?
You have to make sure the shed is anchored so it won't move in a wind storm. You also need to remove all vegetation from the inside of the shed or when it dies it stinks. It is important not to make it a "permanent" structure or the tax man will be on your case (zoning guy also, check before you erect, some towns are a PIA with sheds). I have done this many times and has lasted years for all that I have done it for. Dig out all the grass, etc. and level where the shed will go. Make a framework (like a foundation) out of 6 X 6 PT ties and connect them by screwing nailing plates on the inside. Line the bottom of the area with landscaping fabric. Back fill with 3/4" crushed stone. Now erect the shed on top of the 6 x 6s anchoring to PT Wood. Using the wood as a frame you can line the floor area with what ever you want. Pavers, etc. I would get redimix and pour the floor. Works great, keeps shed anchored. makes for a nice raised area at the base of the shed to protect it when weed wacking, etc. Inside nice floor to make it easier to get mower, etc in and out. Ventilation is also a requirement otherwise things tend to rust up pretty good. Moisture still makes its way up out of the ground and condenses on inside of shed if you don't. Setting the PT wood on a sand or stone base will help with keeping excess water away from the base. Directing run off from the roof of the shed away from it will help big time also. Good Luck with the project.
-
Hello from NW NJ
Welcome from Blairstown
-
anyone know if the vltor vc-1 comp is legal in nj?
This is sold by Rainier as the XTC, extreme tactical compensator, Same issues here as well possibly?
-
AR or AK?
AR Flexibility is key. AR can be configured may different ways. Caliber changes can be made by switching uppers. AR parts are everywhere. 5.56 is a better HD caliber, List goes on and on. Best of all, made in the USA. Had AKs and SKS for a long time. Whenever I went to the range the ARs always went first. Sold all foreign stuff. Not regretting it one bit. In an AR, change the barrel, BCG, and mag, you have a new caliber weapon system.
-
Duck Dynasty - Who watches it?
Duck Dynasty and Top Shot in the same time slot UGH!!!!!!!!!!!!!
-
50 beowulf or 6.5 grendel
I have one as I posted before. You can pin it yourself or have it done. I did mine myself. Sota does not pin the brake. I've seen the build (I bought the barrel and brake), nothing fancy, works OK. YouTube has videos of Sota Arms uppers. I'll post a pic of mine if you would like...........
-
Why are there commercial buffer tubes?
I added a link to my original post. It should explain it all.
-
Why are there commercial buffer tubes?
Cost of spec'd aluminum. Mil-spec uses aluminum to grade 7075. Commercial uses 6061. Because of the lower tensile strength the tube must be heavier to provide a similar strength. Read these posts. http://www.ar15.com/forums/t_3_118/615043_6061_vs_7075.html
-
50 beowulf or 6.5 grendel
Doubt you will. Any particular reason for avoiding it other than the obvious? Picked my barrel up from Sota Arms. At the time they were supplied by Montana rifleman, who also builds custom bolt action rifles. Montana this past spring sold the barrel making operations to Remington. Don't know who is making Sota's barrels now. For all I know nothing's changed. Still Sota barrel was a great price at the time (summer 2012). Today I believe its around $185.
-
50 beowulf or 6.5 grendel
I built a 300BLK last year. Still trying to get to the range to test it out. Something always delays it. Large assortment heads from 110 to 225 grain. Subsonic or supersonic. Working up for a hog hunt in Florida early in 2014 and then a helicopter hog hunt in Texas.
-
Any thoughts on these uppers?
I have both JSE Surplus with Wilson Barrels and PSA with FN barrels. Both are GTG. JSE sells barrels from Wilson Arms, they make a good dependable barrel.
-
debating between G26 or G27
G26 and G27 have the same frame. Go with the G27. Get the 9MM conversion barrel (Lone Wolf, etc). Now you can choose which one is best for each occasion. Could even go for 357Sig conversion barrel. Lots of options here.
- Anybody Paracord wrap their handguards?
- New Every Thing
-
A week in amurica.
Don't forget the pawn shops........
-
Newest Members
Congrats and good luck. Best of health to all.
-
50 beowulf or 6.5 grendel
Travis Haley's take:
-
Colt match target buffer tube help.
Yes, Colt uses a Carbine buffer and carbine spring in a modified rifle length tube. You will need to get a carbine extension, about $25.00, and reuse the carbine buffer and buffer spring. Make sure you get the right extension for stock. Mil-spec or commercial. Size matters. You will not be using the position notches on the tube so 4 or six will work. http://palmettostatearmory.com/index.php/ar-15-05/lower-parts/individual-parts/palmetto-state-armory-6-position-mil-spec-buffer-tube.html Amazon sells this part as well. http://www.amazon.com/Receiver-Extension-Carbines-Tactical-Intent/dp/B004MAFZPO/ref=sr_1_14?ie=UTF8&qid=1376245039&sr=8-14&keywords=ar15+buffer+tube
-
Mossberg MVP Patrol
Flying Fish 3 blocks south of Pigmans Pigmans is low key. Table and chairs only. Flying fish regular shore sit down place. Used to camp on the beach in Duck, before paved roads, lots of good times.
-
Birthday Selfie...
Colt Gold Cup National Match STS - Model O5070X List $1180 Colt Series 70's STS - Model O1070A1CS List $1078 Also available in blue, only if you plan serious mods to gun would I consider blued. Cannot go wrong, history, quality, name, resale value, has it all. Tons of aftermarket everything. But deep down at the end of the day, it's still a Colt. Love my GCNM STS. Now 25 years old still looks as good as new, even when treating it poorly at times. Marlin Camp 45 Carbine is now a collector's item. Good luck with that. See the Marlin Boards. It needs some special TLC also with the buffer and spring and the feeder assembly (no harsh cleaners, it distorts it).
-
Mossberg MVP Patrol
Pigman's BBQ 158 and Ocean Acres Dr.
-
50 beowulf or 6.5 grendel
Bill submitted was modified to state "ANY" caliber with a muzzle energy of 12,000 ft lbs or greater. Edited.......... Bill actually states muzzle energy w/o reference to caliber.