Everything posted by T Bill
-
The build begins!
Good Luck. If you need something we're here, just ask. PSA was having a sale on uppers this past weekend. Keep an eye out, sometimes they carry over a few days.
-
anyone use small rifle primers instead of small pistol primers
Need a little more info first. What type of powder? Whose primers?
- Just got my BIGHORN Gun Safe Delivered from Costco!
-
S&W M&P 15 Sport NJ Compliant 609.99
1/9 twist is a good GP barrel. Best with 50-70 gr heads. Your GTG.
-
Good place to buy a new mattress/box spring?
Sleepy's...... Slowly I turn step by step...... Never again. They suck. Last two mattresses from there and they both didn't last. If they were the cheap ones, my bad, but these were upper middle units "designed to last". Bravo Sierra. Next time I will go to a locally owned store such as mentioned above. They have skin in the game.
-
Opinions on JSE Uppers
Mine have also worked great. Will need a little neutering but hey, it's NJ. Great for 55 ball ammo.
-
Best value AR15 under approx. $1000
I read your statement as you are looking for a M4gery type of rifle. I would save another 100 or so and get a Colt 6920. Yes it needs a little neutering. But, all in all a great rifle. Hey, I was not always a Colt fan, but, over the years the product has proven itself over and over again. Not a Smith and Wesson fan at all. Otherwise, I would and have built Palmetto State Armory from pieces. Lower here, upper there, lower parts kit, all purchase when on sale from the website, and assembled very easily. PSA uses FN barrels made across town from them, very reliable. By piecing the rifle together, you get what you want and avoid the 15% Federal Excise Tax built in to the cost of every completed firearm from the manufacturer. PSA is have an upper sale this weekend, take a look. Will you save money? Who knows, but you will have the rifle you want without a bunch a parts in the drawer you don't want. I have pieced together parts from JSE surplus as well. Wilson barrels here very good also.
-
Primers Do Not Fit
Make sure the crimp ring is gone. Re-ream the pockets and try again. If same result, pockets may be distorted. Usually from cheap brass.
-
Looking for Poconos Area Range(s)
Go to PAFOA.com and browse. Lots of comments on ranges, esp. in the Poke in the Noses.
-
Dr. Martin Luther King, Jr. Niece Speaks out on the Zimmerman Trial
She has learned her lessons well. This was a lose-lose for everyone involved. We must rise above this nonsense. It is very tough to do when POTUS and his crew feed on this. In the end, its all about power, stinking, lousy, rotten power. Absolute power corrupts absolutely.
-
Need some input please
Too hinky for me. Conflicting statements, shipping directions, etc! He cannot get or make phone calls, but can text? HUH? OK maybe can't speak. I have someone pick it up, no thanks, or I will provide FFL address to ship to. Send me a copy of his FFL and then we'll see (I would verify if FFL is valid and he is willing to accept from individuals). Reverse lookup on cell number will give you Telco that owns number, but who knows where that phone is? It ain't worth losing sleep over. Keep trying local the fish will bite! PS. I really don't like Armslist, to many scary stories for my liking.
-
Couple of legal and practical questions: FID, Utah CCW, moving out of NJ etc...
- What to choose?
I was looking at the same thing. Right now I am leaning towards the Glock27. Reasons, more options for aftermarket upgrades and conversions, larger magazine capacity, better trigger. I like Rugers, but in this category I have to go with Glock.- ICE MACHINES.
That filter will be fine. I see it is a carbon fiber filter. I would NOT let it go five years as stated. Carbon filters can harbor and be a growing ground for bacteria over time. Changing once a year at least sounds better to me. I am on my own private well. I use a poly filter, carbon filter and water softener for the whole house before it gets to the refrigerator filter.- 2 years for Illegal transefers
This was a Federal Case. Laws/penalties are different. In fact federal laws are not as strict as NJ laws. Wonder if NJ will now arrest and charge him as he has admitted to the crimes in court.- SW MP15 Sport
Yes, remove upper from lower. Hold down buffer retaining pin in lower and ease out buffer and spring. Now we need to identify buffer, it will tell us what type is it (carbine of rifle). A few measurements will tell you if the tube is reusable or not (probably not). Can't answer until you get a good look at tube. Rifle Buffer.......... http://www.blackweaponsarmory.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/R/i/RifleBuffer.jpg Carbine Buffer http://www.blackweaponsarmory.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/C/a/CarbineBuffer.jpg- Safe Movers Thread
Just a word of caution. When you say up five steps onto your deck, have you considered the PSF factor on the stairs and deck, or the floor of the house? At 755 lbs, and apprx a footprint of 5'x2.5'(12.5 sq. ft.), that puts you at a load of 60 lbs per sq ft even before you load it up? Most deck designs are for 50 PSF. Just mentioning. Hate to see a bad thing here!- SW MP15 Sport
Hold off on that stock purchase! If the gun was built as a AWB compliant, the buffer tube for that pinned stock may be a hybrid. Seems they use a rifle length stock tube with a metal retainer built in to shorten the inside of the tube to carbine length for the spring and buffer. Also most of these types have no milling in the underside for the "stops" on carbine stocks. You may have to replace the buffer tube with a carbine one. I have also seen AWB pinned "carbine style" stock setups using a rifle length spring and buffer assembly. Get the rifle first and post what type of stock assembly you have. We will help you figure it out, and what you need to build the rifle you want. Don't be in a hurry to waste money. Easy to do with this rifle setup! Be aware there are different spring and buffers for the AR-15. Without knowing what you need, you could end up with a bad combination of parts.- AR FTF everytime?
Sounds like ejector problems. Try the following: Broken ejector? Ejector stuck in bolt body? Weak or broken ejector spring? Brass shaving in ejector pocket? If not then Short Stroking. Then another checklist. However most major items on short stroking list you have answered already. They are gas block alignment, gas tube integrity, end of gas tube OK at carrier key. Key clean and tight. Buffer tube extension parts clean and OK. Good Luck!- AR FTF everytime?
Just a quick note. Simple way to check gas rings on the bolt. Take BCG out of rifle. Pull the bolt all the way out in the carrier. Stand BCG on tabletop with the bolt facing down. Does the bolt retract into the carrier under weight of the carrier alone? No, rings OK, Yes, replace rings. Get brake cleaner. Hold upper with muzzle to ground. Spray brake clean down gas tube. Does it come out the muzzle? Check carrier key. Loose? Missing or broken screws? Key clean? No Stuck primers or junk in key? Key mating properly with gas tube? Barrel nut tight? Alignment? Check bolt for proper function of ejector and extractor parts. Especially springs. Carrier clean? Lubed? You stated it cycled OK with snap caps. Otherwise are buffer tube extension parts in place and functioning properly? Weak Ammo? Change any parts lately? Ejection should be at 3 to 4 o'clock on the brass (Twelve is at muzzle, six is end of stock). Sooner or later suggests a possible problem.- H110
Wikkie2204, data on the way! Let me know if problems.- H110
300BLK is the short form for 300 Blackout. That round is very close to 300 Whisper, but they are different. Blackout has been SAAMI spec'd. Not sure about Whisper.- H110
Hornady 8th edition is said to have a 300BLK page. I have not seen it yet. I still load off of Hornady 4thEd. I have been searching for load data, however it is sparse at the moment. Hoping for load data for 3 gun major, and hog hunting. PM me your e-mail and I"ll send you a bunch of PDF's of data I have compiled if you would like.- H110
AA1680, H110 and Lil' Gun seem to be the top powders for now. Loaded 150FMJ and Sierra 175 HPBT. Have not been able to test yet. http://www.300blktalk.com/forum/- Ham/cb for dummies
I know. Suppose to have fairly good prices. I know my sons have little portables they use. I believe the make is "Yaesu". Don't know the model. They use a repeater to further the distance. Have talked to them when they were hiking the AT by using repeaters. See they are the Ham gurus. When they want firearm info they get the old man. I personally have no interest in it. They are off to that hamfest today. Me, I'm off to the range. "It ain't training, if it ain't raining". - What to choose?