Everything posted by Smokin .50
-
Basic Shooting Question
^^^^^THIS^^^^^ Cute story Mike, and drives the point home. You and Alec and Vlad hit the nail on the head! I'll just add this: Hand size vs. grip size and ANGLE on the grip! You need the gun to "fit" right and feel right. Don't get hung-up with "pretty" guns, and grips. Instead, use grip tape when needed, don't be afraid to take an exacto knife to the edge of a grip to cut some "meat" off (OMG it might look like a POS, but you'll shoot straight), and lastly, since you didn't mention which gun, can we presume that you also have to overcome the L-O-N-G pull of a striker-fired gun with or without inter-changable grips? One other thing to consider is the natural point-ability of some guns vs. others. Since not everybody is built the same way, some guns have a "better" personal grip angle than others. Sometimes changing platforms solves problems (buy a different gun that "fits" you), sometimes it's learning trigger control so when ignition occurs the sights are actually lined-up instead of being pulled off-target. Going to league events, shooting other folk's guns and being watched by experienced eyes can tell you what needs to change. And Use the FORCE, close your eyes with an empty gun and see where you wind-up. Keep an open mind and enjoy the ride. Dave
-
What did you get for xmas?
A case of 12 ga. birdshot, socks, underwear, fleece-lined jeans, books, cigars, Harry and David Royal Riviera Pears, etc., etc. But the best gift of all is my son (and hopefully) future daughter-in-law being home for Christmas!
-
Here's What I Bought Myself for Christmas
Sounds great to me! Any plans for glass on top? .243's are KNOWN to be flat-shooting works of art! Congrats again!
-
Here's What I Bought Myself for Christmas
Congrats and Merry Christmas Frank! That's a nice gun for a hog hunt too! Saw a 290 pound sow (last April) take a single round to the head and simply fall in its' tracks, LIGHTS OUT! Enjoy it in great health! Dave
-
Thoughts on what caused this FTF?
As a league chairman and CRSO, I can tell you it's so common with .22's that our Trustees set-up a small tupperware-type tub inside the indoor range to place duds into. Someone later takes a set of pliers and safely takes them apart for proper disposal (not thrown-out in trash). Further, .22's (even the expensive target Match .22's) cause more alibis to be shot in Bullseye league than any centerfire round. Once in 250 rounds is probably the ammo, as all have said. Dave
-
Got the wife's Christmas present all ready to go
It's BEAUTIFUL! Nice job Santa!
-
very confused on some gun laws
Most 18 yr olds still live with Mommy and Daddy, so in a Nanny State, Mommy and Daddy own it, and can supervise their 5 year old (or 18, 19, 20) in the back yard (provided no discharge ordinance). We have lots of teens shoot hand guns at Old Bridge's Youth Bullseye League. Parents must be at the range, grant written permission, etc. Our Trainers are NRA Certified Instructors and Coaches. It's an exempted activity just like "borrowing a hand gun to shoot a match" on range property. If this pellet gun the now 20 yr. old OP is writing about is a long gun and not a hand gun, then he's over 18, so no problem with back yard plinking, provided he's careful and not stupid. And no discharge ordinance. Dave
-
Highschool Rifle Team
Locally most HS kids that are in a Rifle Team are Club-sponsored. Old Bridge has several good shooters, some of whom are multi-disciplined and shoot black powder rifles and pistols with me at our Black Powder League. I think I remember reading about Immaculata HS in Somerville having a Rifle Team. Out in Iowa (where my son lived and worked for nearly 2 years) they have HS Shotgun Teams. A guy he used to work with has a son involved in such a Team. So I got a chance to shoot shotgun with a 14 yr old doing sporting clays and he kicked my ass that day, lol! But he was at his "home course"... So there ARE still some places in 'Murica where the word "GUN" doesn't create a "DUCK AND COVER" scenario!
-
change things up: where did you learn to shoot?
The Vietnam War was still in full-swing back in the spring of '69 (over 44 years ago). I was 10 years old and shot a friend's pellet rifle. I was HOOKED! So Dad bought a Belgian Browning BL-.22 Lever-Action tube-fed rifle and all three kids would be transported to the Winchester Shooting Center (the Englishtown Range), where we would chew-up $3.99 Bricks of ammo I would buy at K-Mart in East Brunswick while Dad waited in the car with my brother and sister. Fast-forward to HS Graduation and I used my gift money to buy a brand-spankin' new Smith and Wesson Model #19 .357 Combat Magnum for around $275. It was a straw purchase plain and simple, since the store "sold it new to my Dad", and Dad immediately filled-out my P2P "selling it to me" as a "used" gun. And it was all legal at the time, since an 18 year old could buy a hand gun (only NOT from a FFL) "right across a kitchen table" in a private sale. So the store owner merely stapled the two carbon copies together to send to West Trenton and I was GTG! Several other firearms came down the road, but the most memorable was probably my Dirty Harry Model #29 in its' presentation case. I bought that new myself from the same store on lay-away. That was back in '79. After marrying the prettiest girl I could find, I worked my butt off for years and saved for a house and furniture. Shot at Englishtown and then found out about Monmouth County Rifle and Pistol Club in Howell, next to Monmouth Airport. My Brother got me involved since he lived "down the shore". That's where I finally learned to be the Shootist that I am proud to call myself today. By fully immersing into most all of the various disciplines that a private club has to offer, and being humble enough to take some welcomed mentoring along with some ball-bustin', I became a really decent shot and entered club competitions in various disciplines, including USPSA, High Power, Bowling Pins, Shotgun, etc., often finishing in the top three positions. Once my Brother joined Old Bridge, he "dragged me there kickin' and screamin'", lol, and I was still a "Probie" (at the club less than 6 months) as the newly appointed Chairman of the club's PPC League. I also became a decent USPSA shooter in both L-10 and Revolver divisions, often showing up to the indoor practice Friday night matches with the Model #29 and Cowboy .44 Spls. that make "major" power factor, often coming-in both first AND last in my division, lol! While there at the outdoor range I smelled something "funny" and saw smoke risin' from around the berm, so I went to check it out. Lance Brunner, the Black Powder Chairman put a "loaner" Cap-N-Ball revolver in my hand and the rest as they say is history....so now most of you know me as a Black Powder shooter, even though I can occasionally be spotted with my Model #586 Combat at an IDPA Match at Somerset and/or Old Bridge, where guys like Tom, Bob, John and several others would gladly serve me penalties for reloadin' prior to slide-lock on my .45 1911, dumpin' mags with rounds still in 'em, lol. So I guess at 54 years old I'm still learnin'... Merry Christmas to all on the Forum! Dave
-
The original Government 45
Chris, Make your shopping list up and I'll let you know when I'm going. They sell primers too (so no hazmat to ship since I'm picking-up for you) as well as SOME popular smokeless powder AND heads used for the big brass. So you figure-out what you need and then call it in to Gregg or his Wife. They're a small Mom and Pop without online ordering or a fancy web site listing everything they have. Open 6 days a week and closed on Wednesdays. They'll take a cc over the phone and will hold it for my arrival. It's just THAT easy.... Have a Merry Christmas! Dave
-
Merry Christmas Everyone
^^^^^THIS^^^^^ Hey Duppie! You and yours have a Merry Christmas even though Nick's cat looks pissed, lol!
-
Need a Revolver Expert
NO--I'll give you MY address and phone so when it's time, I'll get them willed to me because I'm such a NICE GUY! Just kiddin'! May we both live forever and have eyes like in our youth, lol! Merry Christmas to you and the rest of the Clan! Dave
-
Favorite Hunting Rifle and why
Report on the .54 Maxi's: Shop I thought had them is out. They tried to order some for me to swap with you and can't find a distributor. So it looks like unfortunately you were right in thinking that they're no longer made. Seems Smith and Wesson sold T/C to Remlin, and certain decisions got made... But Rob has plenty and will swap for stuff he uses.... Sorry I got your hopes up. I do remember seeing them there along with .58's too...... Stay warm and well! Merry Christmas! Dave
-
The Christmas Scale
NICE! Thanks for sharing!
-
Need a Revolver Expert
That's one of the great problems with the internet....lots of armchair "keyboard Commandos" that don't know shit from shinola! The great Elmer Keith, inventor of the .44 Remington Magnum cartridge, once hit and finished-off a previously-wounded mule deer at a measured 600 yards with his 4" tubed Smith and Wesson .44 Magnum loaded with his custom 300 grain Keith-style flat point bullets. I bring this up to illustrate what a good revolver man can do with a gun he knows. And Keith did this BEFORE the internet was invented, and most probably decades prior to the birth of said Commandos, lol! Smith and Wesson isn't in business to make guns that "shoot crooked", so don't pay no nevermind to armchair types who won't actually get their guns dirty by pullin' the triggers! Enjoy your wheelguns and pass them down to your kids...they are Smith and Wessons after-all! Dave
-
The original Government 45
If you need any brass before the Hog Hunt, just let me know. I'll probably be going to Dixon's beforehand. They sell Magtech brass and Remington too, but Magtech is available in all sorts of calibers, including .45-70, .45-90, .45-110, etc. Available by the box or singles too! Dave
-
Favorite Hunting Rifle and why
I'll be out shortly doing holiday errands, so I'll stop-in and check for you.
-
Favorite Hunting Rifle and why
I understand, and I sympathize with you. There's a shop close to me (I buy my T/C .50 cal. 370 grain Maxi's there) that used to carry them--he may have a box or two of T/C .54's still on the shelf with a little dust on it. Interested?
-
Favorite Hunting Rifle and why
Plenty of places other than TC make Maxi's commercially. Rush Creek's Maxi's are in stock at Dixon's in pkgs. of (20) (and a ton of other places) as I type this. Gregg can accept mail-orders over the phone for them as well as sell you the mold to make them yourself (like Rob does), and pure lead is always available at Dixon's (laying on the floor and sold by the pound). As to favorite arms to hunt with: It depends upon local and State regulations and whether or not ANY regs are mandatory. For the upcoming Hog Hunt there aren't ANY regs, so you bring what you want, what you're a good shot with (and hopefully the two shall MEET, lol). Pennsy has a rule that says nothing under .50 cal. for hand guns for deer, but I can bring a .44 black powder Cap-N-Ball revolver to harvest a Hog, so that's what I did last April on the island . This trip I'm considering bringing my 10 ga. SxS black powder percussion muzzleloader with .715 round balls that weigh approx. 1.25 oz. The mighty SxS has a set of BEADS, NOT a rifle sight, but I can use that as well, just like they did back in the 1830's! I LOVE the SxS muzzleloader for pheasants with #6 Shot (yes I use a license). So yeah, I'd have to say that the 10 ga. is my favorite long arm. If you EVER need anything muzzleloading-wise, Rob and I can make it happen, so just ask. Dave
- M-1 Garand Or 10 ga. SxS Muzzleloader For Hog Hunt? Help Me Decide!
- M-1 Garand Or 10 ga. SxS Muzzleloader For Hog Hunt? Help Me Decide!
-
M-1 Garand Or 10 ga. SxS Muzzleloader For Hog Hunt? Help Me Decide!
Please see Mosin Rob's Thread for info on Hog Hunt scheduled for January 25th. He's running it as the Organizer, and requested PM's to him. The Garand may also be loaned to a friend of mine who's going on the hunt?. Don't quite know if he's going yet, so he can carry the Battle Rifle, lol. It might come down to range to decide which tool to use. I'm leaning a little toward black powder though, just because I like the additional challenge of stalking to get in closer. Not sure yet.... Dave
- M-1 Garand Or 10 ga. SxS Muzzleloader For Hog Hunt? Help Me Decide!
-
Do you shoot tight groups? You shouldn't !!!
Shooting factory Ball .45 ACP (with a power factor in excess of 185) in L-10 division, I've done the "3-Bill Drill" array in a little over 9 sec. About 2 shots per second including draw, mag changes and transitions. Just a regular "C" Class shooter (time-wise), but since I do a lot of competitive (non-action) target shooting I get lots of "A's". The arthritis never really allowed me to "speed-up" and stay on-target, and saving for my kids's college prevented me from spending the necessary funds and time to concentrate on getting better. These days I count on both my average speed and will to win (God forbid I need to use the talents I have), combined with the cross training from all of the various disciplines I shoot to give me a "mental edge". And I'm not against fighting "dirty" either, lol!
-
Do you shoot tight groups? You shouldn't !!!
Mike, don't feel too bad...if my arthritis acts-up I've been known to find the "D" Zone myself, lol. I don't "buy" too many No-Shoots though, so I'm still doin' sumthin' right, lol! 2-3 years ago we did a 2.50 sec. Par Time Drill on a single target from 7 yards away. With my holstered 8 3/8" .44 Mag (shooting 240 grain Cowboy Loads that make Major) I managed 3-A's, 1-C, and 1-D in 2.68 seconds from a surrender start. My last shot broke .18 sec. too late, but since it takes all night to draw the N-frame out of the Uncle Mike's holster, they "gave me" the .18, so not bad for an Old Codger, lol! I could see the wood chips fly on the last forced shot, lol! Oh to be young again.....