Everything posted by Smokin .50
-
B-17 Aluminum Overcast has arrived!
I was doing an engagement portrait session at the beach down in Ocean Grove a year or so ago. During the session, a B-17 flew right over our heads @ 150 feet off the deck. I stopped what I was doing and cracked a salute. Then I saw the wings dip to one side & then the other. The War Bird was probably enroute to the big Air Show at the Cape May NJ Fly-In held annually at the NASW Museum in Rio Grande. They have a B-25 Mitchell, a B-17 and a B-24 Liberator fly-in for the Show. Rides are available there too--at about the same kind of money. It's on my "Bucket List" for sure! Dave
-
Revolver Holster for Gun Games?
Bob, As per usual, you're right when it comes to IDPA Rules. I only own X amount of equipment, so I use what I have for local Matches. They let me use the Safariland 3-across if I only use the back 2 pockets for speed-loaders. Plus I wear the pancake slightly behind my wide (being polite) hip so even with the 3-across in front of the holster my cover garment hides everything. The third speed loader goes in my right hand (strong side) pants pocket. NO advantage that way, everything's fair & square per Tom. And I get to use the strong side for the reloads since the arthritis affects the weak hand more . Obviously for other games, I can wear BOTH of my 3-across Safariland speed-loader holsters. I DO NEED to get to an IDPA Match again soon! It would be nice to show-up and have someone other than me and/or that PA fella who's on their magazine staff to shoot against with wheelguns! Dave
-
What would happen if you shot 357mag out of a 38spl?
O-K Alec, You're also officially invited into the "In Crowd" of Wheelgunners, lol! Didn't mean to forget about you! Ray-Ray too! One of these days I'm gonna get us all together outside for a B-27 Silhouette Shoot-Off with our Wheelguns! Everything from Up-Close & personal to way back 'yonder! One string timed and one string untimed (for the wusses that can't stand the PRESSURE, lol) and we'll each throw a ten spot in and the winner buys the pizza! (AND brewskis ifin we hang-up them shootin' irons)! Dave
- The Ordeal begins.
-
suggestions for a female friend of mine?
Here's a true story from YESTERDAY at the Range: I met a friend of mine there with her Springfield XD-9 to go over why her gun's sights were "off". She was continually grouping low-left outside of the scoring rings @ 11 yards distance. It's her first hand gun. She's shot rifles since she was a little girl, and is used to making soda cans bounce all over the place, so she was getting really down on herself about the wildness of her results with HER gun! She was instructed to first dry-fire her gun several times to try to get used to the trigger's sear and sight alignment in a simultaneous fashion. I immediately noted a flinch/squeeze problem at the point of "ignition", so we worked on this to overcome it, which she mostly did. I shot her XD and put 2 rounds in the black grouped less than an inch apart, so we went to work. After watching her shoot her XD-9, I suggested she raise her grip so as to get the web of her hand as close to the slide as possible and to watch her breathing and trigger squeeze and follow-through. She shot a total of approx. 60 rounds, with each successive target seeing marked improvement from one to the other, which was really great! Here's the kicker: I brought my S&W 586 Combat (4" tube) and loaded it with .38 wadcutters. After dry-firing the revolver in single action, she was able to overcome the huge wooden stock grips and put 3 rounds out of 6 in the black bull in a group the diameter of a coffee cup, the first time she ever fired ANY revolver! And the other 3 were all on the paper, unlike the wild shooting she had done with her own gun! After firing only 6 shots with my revolver, she turns to me and says, "I GOT TO GET ME ONE OF THESE!" These results by the way are to be considered NORMAL by my standards, as just about everyone shoots a revolver with wadcutters better than a stock striker-fired semi-auto with a heavy & mushy & creepy safe-action trigger. After experiencing a smooth & crisp single-action trigger she understood the reasons she was having trouble: it was HER not overcoming the obstacle of a long, mushy trigger pull. With this new knowledge well-ingrained, she now was shooting much tighter groups with HER XD, forcing herself to mentally correct her sight alignment at the end of the trigger pull. I sent her home with instructions to practice dry-firing her XD in a mirror (unloaded, NO mag!) so she could completely eliminate the flinch in her wrist. She reported back last night that she's made more progress already since our little range session. The point to all of this is to illustrate several things: Good instruction will overcome inherrent obstacles. Be they bad habits, bad triggers, bad grip or any combination thereof. Dry-firing practice to get rid of a flinch WORKS! Stock Safe-Action triggers are great for HD, but lack a little something at the Target Range. Especially for beginners. Single-action triggers made target practice understandable and offered a "basis of comprehension" of proper sight alignment at the point of ignition. Just like her RIFLE back when she was little! Women will always seek help shooting before men do. With 3 kids and a husband, my friend doesn't have time to just blow lead down range without seeing an improvement in marksmanship. No one gun is perfect for all applications. If the opposite were true, we would only have 1911's and revolvers to choose from (coincidentally the ONLY centerfire arms used in Bullseye Target Matches). The best advice I can give a Newbie about "What hand gun should I get?" is forget about looks (yeah I know, you spend your money and you want a show-piece) and instead go with function. What's the gun going to be used for I always ask. Different guns are needed for specific purposes. Recently I read where someone here on the board wants their first gun to be everything all rolled into one: HD, carry, target range, gun games, good for the wife, etc. Well, no such creature exists! EVERY gun is a compromise of some sort. And people's hands are different sizes and have different muscle developement. I suggest you try other folk's guns and see what you can actually HIT with, then you'll KNOW what to get! Dave
-
Youth outdoor day
Effective immediately, my offer of complimentary instruction is hereby officially recinded due to non-communication / confirmation on your part. Hope that your event runs well and that the kids have a great time. Dave
-
Traditions pistols
Rob, Buying used is often a good choice, IF the pistol has been loved by it's last owner. Several manufacturers make single-shot pistols. Some even come as "kits" where you have to finish building it and fitting it out. Some folks make a kit into a masterpiece and some make them into an abortion, and then there's everything in-between. Be wary of a "kit gun" that looks crudely finished or has parts that don't seem to fit snugly as this is an indicator or poor workmanship and thus should be avoided. Lyman has a good report card and so does Thompson-Center. T/C's Patriot in .45 caliber are sought-after and usually bring a premium price in excess of $400.00 if well cared-for. T/C's aren't made any more but parts are plentiful. Traditions are also well known and offer an excellent opportunity of getting into BP pistol shooting without investing a huge sum. Although I don't personally own single-shot pistols, I've used them on & off for several years. Several folks @ OB have made their own from kits (most are masterpieces). May I recommend that you phone Lance to ask for some assistance so you know what's what? If you need his number, please give me a call or PM me here. I'll be glad to pass it along and he'll be glad to hear from you. Dave
-
Revolver Holster for Gun Games?
I use a Mitch Rosen Pancake for IDPA with my 4" S&W 586. Very nice & sturdy, and after a while you don't know you have it on. Slight tilt-forward design, so it's easy to put way back on the hip and still leaves room for a 3-across speed-loader holder on the strong side next to the Pancake. I reload from the strong side. Bought it several years ago from Dillon on sale! Alec's speed rig is "one & done" if you're talkin' about USPSA & Steel. That speed rig is NOT usable for IDPA however. Chris, since you didn't specify WHICH gun game you wanted to play, I would think that since you want to carry, you'd opt for the pancake-style. Take a look at the IDPA Rule Book on line to get an idea as to holsters allowed. You can use a pancake @ the other games, you'll just not be as competitive as those with speed rigs.....but you're just out to have fun and practice with what you're bringin' to the Dance anyway..... Dave
-
suggestions for a female friend of mine?
In reality there is not ONE gun that perfect for target range, carry and home defense. So it's either more than one gun or some sort of compromise...... If a person can't rack a slide with the weak hand to clear a jam, then they shouldn't be carrying that gun CCW! My suggestion is to figure-out what grip size she needs, and then go from there. She's brand new to shooting and shouldn't even consider carrying at this point since as you put it, "she couldn't hit the broad side of a barn"! In my 44+ years of shooting I've taught a lot of different folks to shoot all sorts of firearms. A 4" tubed revolver in sigle-action mode will give greater accuracy to a new shooter than ANY auto. It was fun for her just shooting your .45, since it's recoil and blast felt cool, but for the next trip to the range, she'll WANT to at least hit the target. Learning trigger control and breathing in single action mode will get her in the black. IF she just loves a 1911 frame, may I suggest a STI Spartan in 9mm. Relatively economical to purchase & shoot and has a single-action trigger pull. Otherwise the revolver in .357 loaded with .38+P's will do just fine for HD...... Dave NRA Certified Instructor & RSO Competitive Shooter w/ Pistols-Rifles-Shotguns
-
What would happen if you shot 357mag out of a 38spl?
Send an email to the Custom Shop and suggest another run and state your reasons. They might just listen.......... When I think revolvers, I think of you, my son Andy, Jerry Mickulik, and Melissa (with her .357 8-shot doin' steel). And Bob too, lol! One of these days the three of us old guys ought to shoot together!
-
Photographic Diary Full Metal jacket
WOW, never knew the entire story! Thanks!
-
What would happen if you shot 357mag out of a 38spl?
Funny Mike, but nice you're thinkin' of little ol' me!
-
S&W L frame wood grips.
My 686 has the rubber grips that came with the revolver and the 586 I have has the original S&W wood grips on it. I can still use speed-loaders effectively on the 586, so I never switched em' out. I use the 686 for PPC and the 586 for USPSA & IDPA. Good luck with the permit--you're investing in a great gun you'll have the rest of your life!
-
Photographic Diary Full Metal jacket
DROP AND GIVE ME TWENTY PYLE! Great movie! R. Lee Ermey played himself, as a D.I., after starting out as a mere technical advisor. And the rest is history............
-
cleaning for black powder
The Bore butter routine also works, but it has been proven to be conducive to rust in very damp environments and high humidity since it's WATER BASED. That's why I choose the oil routine. Either way works fine, as long as all of the crud is pumped-out of the bore AND as long as there isn't any goo in the ignition pathway (bore butter, fouling, oil, etc.) that will cause missfires. My way doesn't require any checking the next day/week/month. I just case the rifle and store it muzzle-down until the next match, not having to worry about anything leaking out of the muzzle from storage in hot areas. I clean my 10 ga. double ML essentially the same way, only using a custom hickory range rod with a jag pinned in place by Gregg Dixon. Take care and hope to meet & shoot with you soon! Dave
-
cleaning for black powder
Droll, very droll! LOL! We gotta get together & shoot again! Like Telly Savalas used to say, "Who luvs ya Baby!" Dave
-
I give up...
Interesting thread. I'll add my two cents' worth: The OP needs to understand that there always has been a deliberate attempt to inflame on gun forums, probably from Anti's. It's best to disregard them and keep on doing what works for you. I see no reason for you to quit the forum because some here have a varying opinion. Remember that there isn't any test to be a member of the forum. Hell, you don't even have to prove you've ever picked-up a gun! To make claims that people here go out of their way to bad-mouth others here is wrong. Certain items of discussion are more inflammatory than others, and it's merely a case of different people "coming out of the woodwork" to express their concerns for topics that they feel strongly about. In other words, a lively discussion, such as we're having now on this thread. No need for feeling butt-hurt, unless you're the instigator! As to whether or not a CCW would have been able to halt aggressive action in Colorado, I have NO DOUBT that it would have. A friend of mine with 28 years in on-the-job, who was the guy in charge of training for their SWAT Team, joined a club that I belong to and shoot USPSA at. He confided in me that he THOUGHT he knew how to shoot, until he saw what we do at a practice Match. Recently he opined that any USPSA and/or IDPA Shooter of C-class or better would have been able to take-out the Colorado gunman. And he gave details on how it would have went down (during a jam, reload, etc.) and that some of us would have tried a head shot up close after determining he wasn't bleeding from the torso (the ol' El-Presidente` qualifier in USPSA). I believe in the right of self defense and am a strong 2A proponent. But I'm also a realist. Al Sharpie Sharpton can get a bus load of unemployed city dwellers to go protest at the drop of a hat. They don't even have to know what it is their protesting, most are paid to be there AND the signs are handed to them after they arrive and get off the bus! Not too many 30 year old Dads are looking to spend a vacation day to jump on a protest bus instead of taking their kids to the amusement park or visiting family out of state. So I think everybody ought to take a deep breath and just relax....
-
cleaning for black powder
Hey Rob! Sorry I didn't tell you @ the Match (was a little busy), so here goes: On a side-hammer rifle like you have, I would pull the wedge pin and bring the hammer to half-cock to remove the barrel from the wooden stock & lock combo. Remove ramrod and lift barrel out of the stock. I use a specialized cleaner along with soap & warm water to save me some time: Butch's Black Powder Bore Shine. It kid-safe (non toxic) and emulsifies black powder residue on contact. The Military uses it for 20 & 30 mike-mike Cannon since it neutralizes the chemical effect of corrosives without having to use potable water. Also a good cleaner for guns using old corrosive military ammo! Here's the rest of the "Procedure": CLEANING: After dis-assembly, use niple wrench to carefully remove nipple from breech and soak the nipple in the Butch's Black Powder Bore Shine. I use a folded wet paper towel on my cleaning bench, which comes in handy to finish rubbing-off any stuck-on residue/fouling. Next step : I use an old tooth brush and while running hot water in my basement's deep sink all over the breech, I scrub the back of the flats around the nipple threads & breech where powder residue forms. I then place a coffee can (you can use any non-glass vessel) in the deep sink and run hot/warm water into it as I immerse the entire breech into the coffee can. Next take a cleaning patch wet with the Bore Shine, and using a worm (not a jag) twist the worm to engage the patch once it's all of the way down into the breech. Three complete turns usually does it. While the water is running into the coffee can I use my range rod to pump hot/warm water in & out of the breech and flash channel. Pump the range rod to make suds come up all of the way to the muzzle. Once the running water turns clear, there's no more dirt/fouling left in the barrel. DRYING: Wipe-off barrel's exterior (all-around, underneath too) and pay special attention to the nipple thread area being sure to remove any fouling with a small flat-head screwdriver & a piece of the paper toweling. Using as many patches as necessary, dry-patch the bore making sure to get the worm all of the way down into the back of the breech. 2-3 patches usually does it and the bore is now clean & dry. Unwrap your nipple and rub soaked paper toweling all over it and using a fingernail & chemically treated paper towel wipe the threads of the nipple. Blow any left-over chemical out of the nipple and use your nipple pick (if necessary) so you can see light through the orifice of the nipple. Use a drop of oil on the nipple's threads and turn back into the breech by hand if possible. Snug it up with your nipple wrench using just enough pressure to keep it from turning (do not wrench it on with force). LUBRICATION: I use Birchwood Casey's Barricade for my black powder firearms, but any good rust protection product will do (NOT WD-40!). To lube the barrel I use the worm and a patch soaked with Barricade, but first I squirt some Barricade into the muzzle and then place the breech into the deep sink. When you push the range rod into the barrel, some Barricade will flow completely through the entire ignition pathway and out the nipple as a mist into the deep sink. Pump the range rod a couple times to soak all the internals with the Barricade. Remove rod, take soaked patch off of worm and do a thorough wipe-down of all external metal surfaces of the entire barrel assembly, paying special attention to the underside of the barrel where the ramrod goes. Place this now soaked barrel flat on your cleaning bench, as it's ready for re-assembly. CLEANING & LUBING THE STOCK & LOCK: First take some paper toweling and wipe-down the stock. Take the wet paper towel with cleaner already on it (from cleaning nipple) and soak some more Butch's into it and scrub all around the hammer while it's in full-cock position. Suds will appear to indicate the corrosive residue is being chemically eliminated. Continue until suds are gone. Using a small screwdriver and Butch's wet & folded paper towel, dig into the face of the hammer that strikes the caps on the nipple. Lots of dirt here, so do it until it comes completely clean! Using the Butch's soaked paper towel, wipe-around the metal surfaces all around the breech mount. Butch's won't hurt the stock, so don't worry, just get the residue/fouling off of the metal parts. Dry with clean paper toweling. For Lock Cleaning, remove Lock from the stock and apply some oil as needed. Use a clean paper towel or rag and reinstall Lock into stock. Note: This doesn't have to be done more than a few times a year when the rifle is being used on a monthly competitive basis. Using oily cleaning patch left-over from cleaning barrel, do a wipe-down of all of the exposed metal surfaces about the Lock. Now take a few drops of a heavier oil and apply oil liberally to the locking lug on the rear of the breech. Rifle is now ready to re-assemble, so simply reverse take-down procedure. Wipe-down ramrod with Butch's soaked paper towel, paying special attention to the end closest to the muzzle. Dry rod and then apply a coat of Barricade via the soaked paper towel. Re-install ramrod, then store rifle (you're DONE!). STORAGE: RIFLES and SINGLE SHOT PISTOLS ARE TO BE STORED MUZZLE-DOWN ON A PAPER TOWEL!! This prevents oil seepage into the ignition pathway, which is the main cause of missfires!! Basically the gun absorbs what it needs and the rest drips out onto the paper toweling. A simple single dry-patching with a worm and snapping 2 caps PRIOR to loading and she's ready to load & fire again all day long! Continued success with your Black Powder exploits! Dave
-
IDPA Somerset 8/19
NO PRESSURE, but Bob is right. And just a tip: I'd get there early enough to attend the mandatory Newbie Training prior to the Match, so this way you won't have any impediment holding you back when you want to SHOOT, be it the next Match OR THAT DAY! Either way, you'll have gone through the Training and therefore are allowed to register........ The round counts are comparitively low and they only shoot four Stages and then have pizza, so I'd bring my gun and a box & 1/2 of ammo JUST IN CASE I decided to change my mind....... Dave
-
Everyone should watch this
+ 1 zillion! Is it just me or does everyone else here also take notice of a constant attempt (read several times a day by a certain someone) at attention-getting obnoxiously-worded threads that read like a Train Wreck! You have to click on them to see what they're about, and then often you determine that they either lack fact or substance. IMHO this is classic "LOOK AT ME SYNDROME" :wild: . In the last several weeks we've been treated to a double murderer with an alleged copyright issue, revolutions in Mexico not being reported, a pothead with $700 in his pocket along with a loaded .38 and some weed who just happens to be carrying an AK-47 (erroneously reported since AK's are Class 3) on a bus/train in Philly. And that's all I felt like lookin' up in the five minutes I allotted to do so. So once again Duppie, we agree and your assessment is correct..........the 15 minutes are so far past bein' UP
-
Everyone should watch this
Yah Man, you got it right! I got to read the rest of this incendiary thread and get back to you..........lol
-
Everyone should watch this
+1 See, we do actually agree on 99% of the content on the forum!
-
Everyone should watch this
This is all OLD NEWS! All of you "Kids" are treating it like it just happened yesterday.
-
Remington Gun Glub Shotgun Shells $4.97. (not in NJ)
It's only a 3 hour ride to Harrisburg........
-
+1 Hagues
As weird as this sounds, I've never ordered gun stuff on-line. I've picked-up the phone and called my regular guys at the stores I deal with and had them ship me the things I've needed. Buying a flashlight at a gun shop is like thinking you're getting a gormet Italian meal at a Greek Diner! Buy the flashlight @ Wallyworld and save the drama......