MartyZ

This was done before my house, that's why I went with someone else

I have an HVAC company that did the entire system in my house. But I wanted some advice before going to someone who might benefit by giving me advice that can result in additional work that I might or might not need. In other words, I want to know what my options are before having yet another HVAC company turn me into a sucker.

anyone?

smart enough, no. slimy enough, absolutely

Preparation for the SCOTUS NY CCW results?

Ok, so I know absolutely nothing about HVAC, or local codes regarding it, so here is my situation. I have a rental property in Freehold that needed a new furnace back in April, I had a guy come in from a recommendation to replace the furnace. He gave a whole spiel of how when the condo was designed the return for the furnace was both too small and it was in the bedroom so when the door was closed the furnace would basically be choked off. I believed him, he was most likely right, but what he did to resolve the issue is a different story. Also, I do need to add that I was not there at the time, my tenants were, so I was unable to stop him from doing what he did and afterwards is was too late. So what he did was run a brand new return thru the kitchen and into the living room, on the OUTSIDE of the wall, see pics below. It is horrendous and now I need to figure out a way to fix it. Also, he made no mention to mee that a permit is required, I just found out a few days ago from a friend, and now i'm worried that the way he routed the return won't pass inspection.

ttt

Last 1 sold. Admins please close

Ttt

Ttt

Great handguards, I have 2 Samson Evo's. They use standard AR barrel nuts.

I'm 31-60 and I had no idea who Neil Young was.

Resurrecting this thread to showcase some "MINOR" modifications I made to my HD Mossy. Before After (the eotech is temporary until I get a more appropriate optic)

1 still available

ttt

For the last few months my wife has been seriously eyeing Boca, so in about 2 years i'll most likely be in Florida. Stuck here while my wife's grandparents are still alive.

1 set is Sold. 1 set left

lightly used Ridgid R2740 heavy duty 6 speed belt sander I bought it a long time ago and only used it on a couple projects Includes an assortment of new diablo belts (4 x 80 grit, 1 x 120 grit, 3 x 50 grit) Local pick up in Manalapan, Marlboro, Freehold area $45 OBO First "I'll Take It" wins

I have 2 sets of Magpul Industries MBUS Pro Offset Sight for sale. both sets are very lightly used. In other words, they were mounted but the rifles they were mounted to only saw the safe and the range, never any real action, hence both sights are in immaculate condition. The only sign of use is tool marks on the bolt from being mounted, see pics below. Asking $130 per set but it's negotiable, PM me with offers. Local pickup in Manalapan, Marlboro, Freehold area preferred but we can discuss shipping. Update: After checking the shipping cost within NJ, it is not worth it for me to charge you for shipping. So I will ship to anywhere within NJ for free. since I have 2, first "i'll take both" wins, or first 2 "i'll take one" win.

I don't know how it is now, but in 2021 GPUs where impossible to find unless you were willing to pay 2X MSRP on ebay.

This is interesting, I have not purchased an handgun since it went electronic either. So is you can only request 1 permit now without an exemption, how long does it take to get an approval?

thanks everyone. i'll be ordering .429 Berrys then.

I've done it with testors model paint. It's not difficult, just tab a toothpick into the paint then into the roll mark. Once roll mark is filled lightly wide over and around the roll mark with paint thinner, testors as well, on a q-tip or paper towel. Then let dry.

So I'm starting to reload .44 mag, getting the dies and shell plate in my cart ready to order, brass, powder, primers on hand. I go to search for the pills, and I'm seeing .429, .430, .431, etc... diameters bullets. WTF? I currently reload .45, 9mm, .223, .308 and never had to worry about choosing from multiple diameters for any single caliber. I want to load jacketed or plated bullets only, no lead. And I'm reloading for a 7.5 inch PC 629, and a Henry big boy, and I want to use the same ammo for both. So which diameter bullet do I need?