MartyZ

I know, it's fugly, but you do what you gotta do. I will see if it will hold paint.

easy to say when you are in FL and not facing a felony charge if you are god forbid the unlucky test case. For me personally, I am not willing to sacrifice my family and carrier for 15 round mags. That is my opion, if your opinion is different, so be it. You do what you want, I will do what is best for me.

Ok, so I know where, and can easily get, a 30 round magazine, just drive over to a cabelas in PA. Do I go to jail now without passing go?

I'm hoping someone was wise enough to go and buy a bunch of $10 pmags and sell them back for $25.

Well, here we go, plastic to plastic epoxy. This is as permanent as it will get, that floor plate is not moving anywhere. And believe me, I tried.

how much were the mags you destroyed worth to you?

I went the other direction, I spent all Sunday cutting and epoxying magblocks and then epoxying those magblocks to the release hole in the baseplates of 23 magazines. Holy cow, my fingers are still sore, but I saved about $1k.

No, no, no. They are hazardous starting today, they were still ok on Friday.

dropped off my box of 15 round AR mags at the PO Friday morning, this morning they were delivered to my friends door step in FL. The only question I was asked is "Any live animals, hazardous materials, or liquids?", that is all they care about at the PO.

All my 15 round AR mags are currently in the possession of the USPS, on their way to FL. And ironically, they are in a "Target" box.

Simple answer, cost. I have 9 USP45 mags which, 10 rounders are currently going for $70 at the cheapest. So that's either spend $630 replacing them, and hope I get half for my 12 rounders. Or, spend $45 (9 magblocks) and be done with it. I also have 7 VP9 mags and 7 XDM mags. It all adds up. Edit: As far as legal issues go, if 15/30 AR mags were always legal as long as the floor plate was non-removable, then how would this be different?

That's the answer I was actually waiting for . Epoxy the release button, makes it permanently unalterable without power tools. And absolutely anything can be altered with power tools.

Yes, that's how it's always been Here you go, 10 rnd vp9 mags

Yeah, saw that too. They are a CA company and that is legal in CA, but not NJ because it's not "permanent"

Ray, here you go, best of both worlds https://www.kohls.com/product/prd-1527807/casio-watch-mens-g-shock-tough-solar-atomic-black-resin-digital-chronograph.jsp?skuid=94465094&ci_mcc=ci&utm_campaign=CASELINE WATCHES&utm_medium=CSE&utm_source=google&utm_product=94465094&CID=shopping15&utm_campaignid=174293612&pid=googleadwords_int&af_channel=CSE&gclid=Cj0KCQiAi57gBRDqARIsABhDSMqvL1EM6bUkgtOCudRdRZkzoO8GO__lkohBktAQl08zh_chc06liFgaAl73EALw_wcB&gclsrc=aw.ds

I know some of you are planning to use or already have used magblocks for your pistol mags. I will be shipping the bulk of my magazines to FL but I figured i'll hold a few back and try out these magblocks. So I have a few on the way along with their machinable epoxy. My question is primarily with the epoxy. Most pistol magazines, aside from glock, are metal with plastic floor plates, so how are you guys applying the epoxy? Are you applying it around the entire rim, in a few spots around the rim? Or, are you guys applying the epoxy in the hole at the bottom of the floor plate to glue the floor plate to the insert? Inquiring minds want to know.

Nope, doesn't meet NJ requirements. Must be a vice or you are not compliant. Thry WILL check for the jaw marks!

About making them inoperable, what if you take the springs out and store them elsewhere? Are the mags now technically inoperable?

Doesn't always work out as you expect. Had the exact same situation, pleaded it down to unsafe operation. Paid about $425 and walked out happy. A month later I notice a surcharge on my insurance. Even though the state does not give you points, the insurance company is allowed to still charge a surcharge for a pleaded down violation. It does depend on your insurance if they will apply the surcharge or not.

I got all my standard capacity and 15 round AR mags all boxed up, ready to ship to FL. If nothing happens by next week, off they go for an extended vacation in the sunshine state until I move out of this hell hole.

I hope you bought casio stock before you went shopping.

First of all, adjustable stocks are NOT illegal in nj, 99.99% of aftermarket adjustable stocks are made for the AR15 platform . Any other online retailer will sell you any adjustable stock you want. Second, they did not SUGGEST I buy a 590 specific stock, they TOLD me I should buy it if I wanted an adjustable stock on my 590. Nowhere close to 30 round mags, stop confusing yourself.

I have absolutely no problem with price gauging, I just won't buy that particular item from them, but will buy other thinks from them. That's capitalism, and I have absolutely no issue with that. The problem I have with CTD is the fact that they make up their own laws. I wanted to buy an AR15 adjustable stock from them, just the stock, not attached to an AR. They refused to sell it to be because "NJ does not allow adjustable stocks on ARs", that was their response. I told them it was going on a Mossberg 590 with an adapter, they told me to buy a stock specifically made for a mossberg 590, but they would sell me that stock. And this is a company in Texas. Well, at that point I told the guy to go F himself for making up BS rules and I would never shop from them again!

These are the same nitwits that make up their own laws. Would not ship me an adjustable AR15 stock, on it's own, even after I told them it was going to be used on a pump SG. I would rather pay more just to NOT buy from them.

If you car stereo supports MP3 then you should be able to use one of these: https://www.amazon.com/AUX-USB-Converter-Oxsubor（CAR-Function）/dp/B0794MK9NY/ref=sr_1_15?ie=UTF8&qid=1542209371&sr=8-15&keywords=usb+to+aux+adapter