Everything posted by MartyZ
-
At my wits end reloading .308
No, using standard hornady dies. I have the hornady 10th addition manual and an older lee manual. Also using hodgon's website for cross reference since I will be using CFE223 for plinking ammo. So are you saying that I need to load it short? I don't think I have a short free bore on both barrels. What about the canalluerm why would it be so low?
-
At my wits end reloading .308
I did not test for longest OAL that will fit in the mag, but maximum OAL, by the book, is 2.8, but I am loading it to 2.685. The factory AE 150gn FMJs are loaded to 2.693 and the canolluer is where it's supposed to be. When I say rim of the bullet I mean the par sticking out just past the case, above the canolluer and before the ogive. If you look at the picture you will see a horizontal scratch where it gets stuck in the chamber.
-
At my wits end reloading .308
Ok, so up till no i've been reloading .223, .45, 9mm, with no issues what so ever. Today I started setting up to reload .308, I have 900 Hornady 150gr Interlock SP that I got from the LNL rebate last year and figured I should start reloading for my AR10. I have had nothing but trouble with these bullets. So i'm setting up my bullet seat die and the first problem I find is, with the case trimmed BELOW suggested trim length, trimmed to 2.000 (recommended 2.0005) and the cannaluer (sp.) goes down below the rim of the case with OAL at 2.685 (factory AE ammo is 2.693 AOL), so I can't crimp. Second problem is that even below factory ammo AOL the rim of the bullet gets stuck in the chambers of both my AR10 and my Savage BA, see pic below. I already destroyed my cleaning rod trying to knock the bullet out of the AR10 chamber. You can even see the bullet being pulled out when extracting. I went thru at least 10 cases and 10 bullets and I still can't get this to work. Is there something wrong with these bullets? Are they designed to be loaded long and used in extra long chambers? Any and all help is greatly appreciated. Disclamer, I was just testing bullet seating depth, there was no primer or powder in the bullet.
-
AR pics, lets see'um!
Oh, he's not giving it up. We took it to the range this morning, runs perfect.
-
AR pics, lets see'um!
I might if my son decides he wants it. But I personally like the contrast.
-
AR pics, lets see'um!
They have threated me good so far, and the 556 EX come pre-drilled, which makes pinning a lot easier.
-
AR pics, lets see'um!
Doing a build for my son, and I was stupid enouph to ask him what color he wants. Well, here it is
-
$10 HF 50cal ammo cans
Maybe. But they do stack well on each other. I don't buy REAL ammo cans. Something about bringing old, dented, rusty, steel boxes into my house just does not appeal to me. I would rather buy new for $10 then used for $20, even if they are not the same dimensions.
-
New YHM hinged gas block
You all know that I am one of the people on this board looking for technical solution to make the stupid NJ AWB ban easier on us AR builders. I already put a JP 2-piece adjustable gas block on my AR10 build and I have been looking high and low for slim muzzle breaks that actually are worth investing in, all in the hopes of being able to take advantage of the AR platforms modularity without having to worry about unpinning the muzzle brake every time you want to upgrade your handguard. Well, looks like YHM just released an upgrade to there 2 piece gas block, a hinged low-profile gas block, and it just got delivered to my front door. This was going to go onto my wife's pink camo build, but is now going onto my son's candy apple red build, those pictures will come later. Anyway, hoping to finish the build by tomorrow and take it out to the range to test on Sunday. If anyone sees a candy apple red AR15 at Range 14 on Sunday, that's me.
-
Its finally done...for now
Very nice
-
Sales Tax on Internet Sales...?
Amazon has been charging sales tax in NJ for quite some time, because they have a fulfillment center in Edison.
-
New slim muzzle brakes
Here you go, but in the fund raising phase right now for the handguard swap.
-
New slim muzzle brakes
That was actually the first MB I bought for my SPR build 2 years ago. It's a piece of crap. Had to return it because the threads were either the wrong pitch or too small, would not go on passed a few turns.
-
New slim muzzle brakes
Very simple example, right now I want to change my hanguard to a 17" strike rail on my 20" barrel, and I can't. My best option right now is to cut off my gas block and put on a 2 piece gas block, or the new yhm hinged gb. So that for me is extra work and extra money down the drain.
-
New slim muzzle brakes
I agree, but price should go down once other companies get on the band wagon
-
New slim muzzle brakes
Here is another one, 3 chamber brake, no prongs. I am definitely liking the trend https://www.opticsplanet.com/yankee-hill-machine-yhm-low-profile-muzzle-brake-5-56mm-for-1-2x28-threads.html
-
$10 HF 50cal ammo cans
Haven't compared them with M2A1 can's but I have them stacked 3 high now and they are solid, no wobble and no gaps
-
$10 HF 50cal ammo cans
Any need 50cal metal ammo cans? Harbor Freight has them for $9.99 with coupon until 10/31. They are made in china but they are decent quality. I have 12 and will be getting more. Attached coupon ammo can.pdf
-
Any South Jersey Shooting Club members?
I was actually looking at another range, I am sooooo tired of the R14 BS. This range looks awesome, no required club meeting BS and no community service BS. I just wish it was closer to me, 65 miles is quite a hike, but it might be worth it if there is no time limit, and annual fees are certainly great compared to every other club. Question about the family membership. Does it cover the entire immediate family or just 1 additional person. In other words, will $350 cover myself, my wife, my older son, and my younger son when he turns 10?
-
Driving Pet Peeves
I hate DRLs that are the full low beams. My 2008 Passat DRLs were the full low beams, I couldn't turn them off and had to change the bulb every couple months because they kept on burning out. On my current car, the DRLs are also the full low beam, but at least I can turn them off. But why do manufacturers do that? Why give full power to the low beams to be used as DRLs?
-
Let's see those wrist clocks
Here you go
-
$0.01 hazmat at brownells
All you reloaders out there, today only, Brownells has 1 cent hazmat and free shipping on all orders $150 and over. Code: VBC
-
disposing of old gasoline
Someone mentioned that if it is old it won't smell like gasoline but more like turpentine. If any of you want it you are more than welcome to it, minus the can. I would rather throw out $10 worth of gas than possibly shelling out a few hundred dollars, at least, repairing gummed up injectors.
-
disposing of old gasoline
Thanks for the response guys. I will smell it, if it smells ok I will use it, if not I will find a hazmat recycling center.
-
Mag Ban Injunction Hearing 7/12/18
They would have to put in the 40oz beer cans.