Bully

I was in there the other day for the first time. Seems like a genuinely nice guy. Knows his stuff. Very clean, neat store. Not a ton of inventory, but enough to pique curiosity. I'll most likely go back. C

http://www.groupon.com/deals/dc-ghd-valastro-international-academy-1?utm_campaign=VisitorReferral&utm_medium=email&utm_source=anonymous My buddy forwarded this to me. Maybe someone on here is interested. C

Undercut trigger guard will allow you to get your hand just a little higher on the grip, aiding in controlling recoil. C

Spartan is made in the Phillipines. Trojan is made here. Part of the price difference as well. C

Yes. I'm not experienced at this stuff, so I am having them do the really major fitting. Frame/slide/barrel. That way my screw ups won't be as co$tly. Next one, if there is a next, I will do more of the work. C

So, I got a sneak peek at my frame and slide from Bob at Fusion. It's not gonna be quite as plain Jane as I had at first thought. I'm pretty stinkin' stoked at what should be showing up around the end of next week. I will keep this thread updated as I move (slowly) along. C

Also try switching ammo. WWB does not work worth a darn in my gun. That being said, you may want to give Para a call. Good luck with it. C

This^^^ C

Take a look around for slim grips. Alumagrips (I think that's them) sells them. Then there are several others that make them as well. I believe VZ makes some. You will need to change out the grip screw bushings if you go with a slim set. I believe the grip makers sell those as well. You will also want to invest in a grip screw bushing driver to remove the bushings as a regular screwdriver has a tendenct to mess them up a bit. I am looking to pick up a driver and I believe I live kinda close to you. You or your husband are welcome to borrow. As for the grip safety... Well, there are a ton of mods that can be done to any 1911. PM me if you like and I will do what I can to help out. C

Range and BBQ!!! That being said, it WILL see some range time. If I get lucky enough to build it right, I may sell the Kimber to build another one. We'll see. I have a serious lust for a railed Gov't in 10mm. C

Welcome aboard!!! Lots of Bergen Cty folks on here. C

I haven't picked out a grip safety yet. But, it will be operable. I like the Wilson Combat Bulletproof Concealment Safety, however it may be a bit more than I can handle, fitting it wise, on my first project. We'll see. C

This is the frame/slide I am doing (only a Gov't). I don't want the checkering. Although I agree it would be neat to have the bands of checkering, I think I am going to forgo them just the same. C

The frame does not come without checkering. Aesthetically, for what I have planned for this pistol, it just doesn't fit. I like guns for function as well as the way they look. I'm a little... particular that way. I get the reason for the checkering, it's just not for me. Not on this one. Mostly a range toy/BBQ gun. And to be honest, to be a little different. C

Well, I sent the loot in a couple of weeks ago for my frame/slide kit from Fusion (fusionfirearms.com). I ordered a 5" Slabside kit with a full dustcover frame. They are fitting the slide to the frame, the barrel, and sending along a slide stop and main spring housing, both in stainless. Since I'm the impatinent type, I also ordered a couple of things from Brownell's with a gift certificate that I won on m1911.org. I got a Wilson Combat extended mag release, the catch and spring to go with it. I also ordered a stainless pin set and a titanium firing pin and extra strong spring for it. The firing pin was backordered, but the total came to just under 100 bucks with shipping. It all (minus the f.p.) showed up the other day. I am looking forward to the challenge that is coming even though the heavy fitting is done. I have never attempted anything like this, but I know that it's gonna be fun. First things will be to de-horn the frame. Also, I will be attempting to fill in the front strap checkering that comes with the frame. I am considering silver solder, but may opt to just sand it down. I need to have it in hand to judge the thickness and see if there will be enough material if I go the sanding route. Again, I don't know what the hell I am doing so any constructive criticism will be very welcome. Pics will be posted shortly. C

^^^ But that doesn't mean you can't open something!!! Go for it! C

Ramsey Outdoor has a couple of them in stock. C

Welcome aboard!!

Not yet. I have put 405 rounds down range with it and I am fairly sure that I know what I want to change on my Kimber. Gonna just be the sights. I will be needing a smith to check out the work on my 1911 build, though. I will have them go over the gun to be sure it's safe. Does anyone in north New Jersey mess around with building 1911's? Have you done it before? If so, I'll be looking for pointers and I have coffee, beer, or food to thank you for your help. PM me. My kit should be here in the next couple of weeks. C

I love the look and potential functionality of a railed 1911. Aside from the ability to attach lights/lasers, there is also the fact that you are adding weight to the front of the gun helping minimize recoil and getting the sights back on target quickly. An all around win/win in my book. Good luck. Let us know what you get C

Ummmmmmmmmmmm.... Cause all 1911's have big, brown, puppy dog eyes that can't be resisted and they all need a loving home. C

Congrats!! A good score all around. C

Guncrafter International Model 2. .50 cal 1911 with a full dustcover/rail and slabside slide. Black frame and ti blue slide, brushed stainless accents Fusion 6'' longslide 10mm 1911 with od green frame and graphite slide, polished stainless accents Henry .22 lever action Golden Boy That's probably about it. C

Very nice. I like the lack of front serrations on it. Enjoy it. C

Look into a .22 conversion. Kimber makes one and they work great. Advantage arms makes one as well that locks back after the last round. Beautiful gun, btw. Good luck with it. C