Everything posted by Russell
-
Glock 22lr conversions
How do these compare to the Advantage Arms kit? Even with the sale they're more than the AA kit. I've never looked into the TacSol kit before. Does the slide lock back on an empty mag like with the AA?
- New STI Rollmarks
-
New STI Rollmarks
For some reason the large logo doesn't bother me on my Trojan; normally I don't like billboard rollmarks. But the new rollmark does look nice.
-
LaserLyte training
Thanks. For those that have the LaserLyte and SIRT, do you think it's worth getting the LaserLyte or is the SIRT alone just as good dry fire practice?
-
Buckmark Hunter 25 yard "paper punching" optic
+1 on the TRS-25. I have one and it works very well.
-
LaserLyte training
I'm also interested to hear how well the SIRT works with the LaserLyte. I have a SIRT en route to me now and was thinking about getting a LaserLyte target. How large is the LaserLyte target? I think I heard someone say it was 5" in diameter? Or do they come in different sizes?
-
G19 gen 4 + vickers extended mag release
Do you have the same problem with Gen 3 Glocks or are you saying this is an issue for all Glocks? Lots of people have to shift their grip slightly in order to engage the mag release, this is very common for all handguns, not just Glocks. If I were right handed I'd have to shift my grip on just about all guns to reach the mag release. A few things to try: 1. Just shift your grip slightly to reach the mag release, there's nothing wrong with this. 2. The OEM extended mag release is slightly larger than the Vickers, you could try that, but it probably won't make a difference. 3. Press the mag release with your left thumb as you're coming off the grip and reaching for a new mag. 4. Reverse the mag release to the right side and presss it with your trigger finger or middle finger.
-
Friday morning 12am. Ammoman.
Did anyone actually get some? 9mm is now out of stock.
-
Friday morning 12am. Ammoman.
I got approvied in about 5 or 10 minutes.
-
Out of state training with low cap mags
Like HE said, it's a MAGPUL course, they should have a few spare Pmags you can borrow.
-
Happy Hanukkah to my fellow tribesmen!
Thanks, you too!
-
Real Deal Steel - November 17th 2013
- Practical use of GSSF membership in NJ
I recently mailed in a renewal and it took about 3-4 weeks. I don't know if an initial application would take longer.- Real Deal Steel - November 17th 2013
I'm out. I heard the guy who does the scores for this one is a real jerk and took a whole 24 hours to get them up last time...totally unacceptable- NYC subway shooting, Nikon Style
Wow, beautiful picture Howard!- Don't accept generous offers to try someones gun!!!!
Howard has since returned the favor by letting me try his CZ. An SP-01 is on my short list. But where's the fun in that!- knock down steel 11/9/13 at Old Bridge
In!- Glock 34 3rd Gen lower with G35 g4 upper
I hadn't tried it previously, but it looks like Adam's right and a Gen 3 upper will work on a Gen 4 lower. There's a gap around the front of the slide, see below picture, but I don't see why this wouldn't function ok. I didn't try firing it like this, just put the slide on and it seems to work fine. It definitely would not work going the other direction with a Gen 4 upper on a Gen 3 lower. A 34 and 35 lower of the same generation are identical except for the ejector. A 9mm slide will likely work fine with a .40 ejector (lots of folks do it with conversion barrels). However, I've heard that you should NOT use a 9mm ejector when shooting .40. There's a possibility that the 9mm ejector could hit the .40 primer and set it off when ejecting a live round. I don't know if there's been a confirmed case of this, just a rumor I've heard, but I wouldn't risk it. It's very easy to swap ejectors. Keep in mind rule 21.3 if you're still planning on using this for Production. A 9mm upper is not allowed on a .40 frame.- Glock 34 3rd Gen lower with G35 g4 upper
You cannot put a Gen 4 upper on a Gen 3 lower and vice versa. Look at the front of the dust covers, the Gen 4 is more open to clear the dual recoil spring. The area inside the frame where the back of the recoil spring assembly touches might also be different, but I don't have them in front of me right now. If you just stipple the G34 and don't also get a grip reduction you can still use it in production as long as you keep the stippling within the area noted in the rule book. Also, technically even if you could swap uppers I don't think that would be production legal. I believe the gun has to be in the original caliber so if using a G35 lower would have to be .40, not that anyone would be able to tell. I'm not sure about the Zev trigger.- World Class Steel @ OBRPC - Sunday 11/3/13
Jet, your G22 is a Gen 4, right? If so, try calling Glock and ask them to send you the beavertail backstraps, they'll probably send them to you for free. They now come standard with all Gen 4s. See how awesome Glock is! Try calling up S&W and ask them to send you free revolver parts...- World Class Steel @ OBRPC - Sunday 11/3/13
So what's the crazy challenge this time, flintlocks? I'm in with my brand new G34.- USPSA at Shongum 11/2 signup
Agreed! And good to meet you today Mike. Wow! That was fast with the scores!- RTSP Digital Simulator - WAY COOL, and I don't like video games
I was there tonight to pick up my G34. Rick gave me a tour of the new expansion and it looks AMAZING! In addition to the simulator, which looked cool but I didn't try, they also added a number of classrooms, a dojo, a VIP lounge and a simunition shoot house! The shoot house looks awesome, I really want to try it out. The sales room is also expanded and about 4 times bigger than it was before. It's kind of hard to believe a place like this exists in NJ. Also every single employee there is way too nice to be working in a gun shop. When you walk into a gun store you're almost expecting to be met with rude or unattentive staff, at least based on most of my past experiences. Not so here! Everyone at RTSP is super friendly; I guess they didn't get the memo that they're acting way too nice to be working at a gun store- USPSA at Shongum 11/2 signup
In!- Glock dealers in northern NJ area
RTSP has a lot of Glocks in stock. They also have blue label Glocks which you can buy at the discounted LEO price if you're a GSSF member. - Practical use of GSSF membership in NJ