Everything posted by Lalo
-
Question about this upper?
Not sure you can remove the barrel extender and still be within the legal length. Might not even be possible to remove it, period. You can remove the flash hider and pin/weld a brake and you'll also have to mill down the bayo lug in order to make it legal.
-
Bayonne Saturday?
Hmm, never been there. How much for how long? How many people per port? Was thinking of hitting EFGA this weekend...
-
Think muzzle brake was done wrong. Help? edit: update on op
There should be absolutely no play with the muzzle device at all. What would happen if it moves enough that the bullet grazes it as its coming out of the barrel? Not good. Please tell us who did this for you.
-
Post Your Tactical Shotgun Pics
If you're used to pushing forward on the forend when shooting to compensate for recoil, your index finger is going to get so banged up when it smacks up against the front part of the AFG. I did that on my Mossberg 500 and looked cool and all, but it only lasted about 5 shots of slugs before I had to rip it out.
-
Can i Shoot a mannequin at ft dix?
The only outdoor range I visit is EFGA and I know you cant do that there. But if you find a range that does, give me a holler. That sounds like fun!
-
Top Shot
I hope it comes back after the all stars season... History Channel has not made any official statement regarding the future of Top Shot. However, on May 19, 2012, host Colby Donaldson posted a message on Twitter saying "#TOPSHOT is comin' back BABY! Bring on the ALL STARS!".[9] On following tweets, he mentioned that the new season would premier in early 2013.[10] As of November 2012, the official website had contact information for shooters wanting to apply to appear on the next season.[11] On October 16, Donaldson again offered an update on Twitter, writing that they "just finished filming Season 5", and that fans should stand by for air dates.[12]
-
Shotgun Shootout! March-Clinton WMA or Lehigh Valley SC?
Lehigh sounds nice, never been there, but I would prefer the casual environment of Clinton more. Not to mention it would take me twice as long to get to Lehih then it does Clinton. I'll keep attending the Clinton shootouts every month. Coplay, PA, not so much.
-
ar 10 charging handle/scope clearance...
Don't have an AR10 or an m308 scope, but I do have a BCM charging handle mod4. The extended length of the latch certainly helps pull it back especially if you have a scope mounted really low to the top of the receiver. You can't go wrong with the BCM charging handles. That's all I use in my ARs.
-
Which AR is the most "NJ compliant"?
Like it was previously mentioned, most manufacturers make NJ compliant models of their rifles. A lot of gun shops in NJ that sell AR's sell already compliant models. Pinned stock, break instead of hider, 15 round mag is what outré looking for. Bad time to buy right now but they are still out there. Was at Lou's in Raritan last week and they had a Spikes AR with Magpul furniture for about $1600 just sitting there. Let me know if you're in the market for one, I have 2 ARs I'm the process of building that are already neutered.
-
9mm factory reload 1000rds $215
Even though the price is right, I probably wouldnt purchase reloaded ammo unless I absolutely had no other choice. It's all well and good until a round blows up in your face. Probably hasnt happened and hopefully will never happen to any of us but I wouldnt take the risk. That's just me.
-
The Walking Dead
Rick totaly lost it, this time in front of everyone including the new people. People are going to start losing respect for him and will not rely on him as a competent leader. I think Rick's leader of the pack days are numbered and will probably be replaced by Tyrese.
-
Swapping floorplates on pinned pmag
The second you remove the pinned/glued original floorplate and have the parts available to make a non-compliant magazine, you are breaking the law in NJ. The task is definitely doable and rather easy to do on the PMags, but I would not convert them while you are in NJ. Go to a friend's house in PA and perform the work there. Once you're done and have repinned and reglued the ranger plates, bring them back over the border.
-
Lou's Firearms Raritan---Two Thumbs Up
+1 Picked up a handgun from them last weekend received excellent service. I visited all my local shops over the course of two days so I really got a fresh feel for their service and Lou's was my favorite, hence why I picked up my pistol from them. Well worth the 30 minute drive for me.
- Pinning a stock
-
Pinning a stock
I wouldn't worry about it. As long as the pin is really in there, meaning not loose to the point were you can just push it through with your finger, I saw you're fine. If its loose and are afraid that the pin will slide out after shooting it a while, add some JB weld (epoxy) to it just in case. Look at it this way, if you were trying to collapse your stock, can you do it without introducing tools? Even if you blind pin it and epoxy over it, you can still collapse it if you take the time to drill out the pin and use tools.
-
Need AR build advice!
I don't think it'd be a bad idea to do what you propose. If you're looking for a complete look with all the bells and whistles, why not mate the PSA upper with the S&W lower. That's the beauty about these rifles, you can mix and match accessories and swap lowers and uppers whenever you want a different look. Only thing I would suggest is keep a BCG married to the same upper all the time. Don't think it would ever be an issue, I just like my BCG to wear/break in with the same upper. So why wouldn't you do it? What are your concerns? The PSA uppers are not bad quality. Don't think you'll notice much difference in accuracy. I have an M&P 15 ORC and a PSA upper with a CCMG lower and they shoot similarly. I have different comps on them so they feel different but accuracy is about the same. Do what you want, they're your rifles.
-
WMD BCG IN STOCK
Managed to get one. Now I'm just waiting for the cancellation email saying its out of stock...
-
The Walking Dead
Yes sir. Now watch, with my luck I'll lose power Sunday at 7 right before the Sunday night shows...
-
Post Your Tactical Shotgun Pics
Hmmmm.... Saiga 12.... Do want... Maybe I'll trade one of my AR's for one.
-
Found Complete BCG's in stock
Hmm... Sounds like one of the many many new companies that are just starting out now trying to sell firearm parts. Why are they only selling "almost finished" products. I'd rather not take a chance. Good looking out though.
-
Light Primer Strikes - Please help
Whoever put your lower together, smack him upside the head and don't let him touch you AR again. Check out this link. Pop out the pin and switch it around, 2 minute fix. Dont bring it to an armorer, waste of time. http://www.ar15.com/archive/topic.html?b=3&f=118&t=461070
-
2x Spikes Tactical BCG's @ Lou' Classic Firearms in Raritan
$160 each. 2x available as of the time of this post.
-
PSA Mid Stainless SS12G2 Premium - 16'' 223 Wylde Stripped Railed Upper - Without BCG or Charging Handle
Aaaaand it's gone... How much did it cost?
-
FDE PMAGS 15/20 FDE
Hmm, I wonder how they block/pin these. Debating whether to go with these or wait for MidwestPX. $35 sounds a little steep.
-
Shotgun Shootout! February 3rd at Clinton WMA
I'll still be there unless we get a foot of snow. Probably get there by 9am.