Barms

The bulb is new replaced it like two years ago. I like the idea of the gas cap off. Are there any other "seals" I need to check? Like do all carb gaskets need to be fine for a good vacuum to happen on the prime? Oris the prime just a pure squirt to the carb?

I gotta prime my mower like 100 times to get to to turn over. I got new gas, it's not flooded, I'm not smelling lots of gas on the prime, the plunger is in good shape. It just doesn't "sound" like gas is entering the carb. Instead of hearing "squish" on the prime I'm only hearing "Pish" of air. After 100 primes and 50 pulls it finally starts. Once it's warm it starts first pull after that. What would cause a carb to not prime. ?

On quality: your decision is "place to keep curious people out?" Or "place to never ever ever ever have them stolen?" On size: the gun number means nothing. Look at the picture of the Field Stream 10 gun and you see they only have three long guns in it. So know what you're buying size-wise

I just hope you could get your personal jet and find your pilot if the SHTF.. Look pretty awesome though http://online.wsj.com/articles/for-sale-renovated-luxury-condo-can-survive-nuclear-attack-1415575922

If you're gonna do it. Ask for the commercial size downspouts. Bigger always better to avoid clogs from leaves.

I love threads like this... Like when I read home improvement DIY posts where someone posts a picture and asks "is my venting on this sink right?" And the next three replies are: The outlet there isn't grounded right You need more insulation Your trap is too low

Do obvious he took the cones from the beginning of the video.

6" Cree LED replacement high hat units. $14 a pop at Depot last week. These regular are like over 30. Buy them all now while you can. Whoops. I just read you want just the bulb. The above is a whole retrofit unit. What I love about the retrofit unit is that it makes a complete air seal to the ceiling. No more leaky high hats.

All you guys who are on wifi often or at hotspots. You guys do know to set your apps to point to wifi first and not cellular. Again. I can't see how you all are pulling so much CELLULAR data. Not data, but cellular data. I mean are you watching YouTube vidoes in your car? If you are at home or work point that shit to wifi. Do you guys known how to audit your devices to know what apps are pulling the most data? Just set those to wifi only. I'm still flabbergasted at how much cellular you guys pull.

How the eff are you guys using so much data?? Holy shit. I barely use 1G a month. Am I not watching enough porn on my phone? As a matter of fact I just realized last month I was paying for 2G and overpaying. I just lowered mine to 1G

I think he gained 30 lbs in the year since.. But back to real issues. So he had a 1911 which has a hair trigger. I watched the slo-mo. He was finger out until the lift. Do you guys think he was condition zero carry? If he was 1 it would not have happened? Was he taught to carry zero? Are 1911s taught to carry zero? ( please lets not have this drift to Glock carry or whatever, I'd like to know what went wrong here (besides his mustache). Was this shooter error or hardware error? ( cond zero vs 1)

I read "one long day". It could have randomly been any of several seals who luck of the draw took him out. They were picking off anybody in that building that stuck their heads out the door. I don't think he is anymore at risk than a guy writing a book about it.

Mandarin Collar? Sounds like one of those phrases like Dirty Sanchez...

This would work. Yes Djg, it is a cabinet. (With fancy 3 bolt lugs that make you all warm and fuzzy thinking it's a safe. )

Yeah was thinking that but then I lose the use of that half of the shelf. I keep a pistol and mags on the shelf. Don't really want to rivet it and put a hole in the safe.

Not sure where to post this but anyway.. My first "safe" I bought...a 3 long gun Barska.. Yeah we all know 3 really means two and ten means 6 etc etc... Anyway, what I really didn't research was the height because my AR fits in fine but my shotgun will not fit because there is a small shelf that is just 2 inches too low for my 28" shotgun to fit inside. I want to knock out that shelf. (Will probably mangle it removing it) and fabricate a new one and affix it 2 inches higher I like the idea of the shelf still. My question is how would I affix a new shelf inside? I just want to recreate the existing one it's like 6"x10" flimsy metal looks like they just tac welded it inside. I'm sure I will mangle the old one. I could fabricate a mini shelf from sheet metal, plastic, or even wood. My main issue is adhering it inside. How would you get it to float? I don't want to drill the sides. If I make some small tabs on the sides and wedge the shelf in I just sorta want to "glue" the sides inside. I hope you guys get what I'm saying. Think "how to get a tray of tin to float without BRACKETS on the side". If I was a welder I would shoot 4 tac welds and be done. I know I know, get a proper safe. This one just fits perfect in the hidden space I have it right now. If I make a "tray" and the sides push tight inside is there any kind of adhesive that is solid? The inside surface is painted. I know about adhesion is critical depending on the surface.

The Sig and GSG 1911 are like down to $200 nowadays. Don't get ripped off.

So in the above can he apply for the change of address first and keep his old FID? Or will they not process the paperwork or fingerprints until he shows a new license?

Yessir.

DSG Arms is offering the stock and complete stock kit mil spec for less than $50. Man wish I was building one right now.

Flip flops at 2 am should put you on full alert.

I learned a lot in this thread.

So I too don't get the slide release on the right side. On the left side the mechanism is small and very near the rear. When you look at the right side you see that it looks like it's a hinge to rotate a mechanism several inches forward. Why wouldn't both releases be near the rear?

I was just reading reviews of the MR350R. The key to this model is it's two watts. More watts equals better penetration of signal through and around buildings. $54 bucks for the pair.

Ham and CB does not work for soccer moms. C'mon guys. I will look into the Motorola suggested. Any other keys I should know with a Motorola type device in a time of high stress? The only time I want to hear about HAM is on cheese for lunch.