Everything posted by pbkid6974
-
Mosin archangel stock
im not mad about the "historical" value. i just feel you are trying to turn a decent carbine/rifle into something its not. they are perfectly good at what they need to do they way they are. if you want a sub-MOA rifle then buy one that was designed to shoot it.
-
Clint Benson, son of ex-Giant Brad Benson Indicted, charged w/ hollow point 22lr along w/ other charges
im only 24 too. i just don't understand why kids my age think that fighting is such a good idea. i've had to break up a fight down in wildwood and i ended up getting sucker punched before the kids ran away when the cops showed up. i wasn't even in the fight and ended up getting hurt the worst. i was all for letting the kid (guy i knew but didn't really like) in my group get beat up. he was running his mouth after i had already de-escalated the situation twice. one kid from the other group jumped him and my other friends gf decided to get involved. someone pushed her down so i stepped in to protect her (her and i never really got along, but you DO NOT hit a girl. EVER). i got punched in the face and they ran away. so i wasn't in the fight and got a broken nose and a bill from the wildwood rescue squad. it sucked.
-
Clint Benson, son of ex-Giant Brad Benson Indicted, charged w/ hollow point 22lr along w/ other charges
yea i felt the same way about it. i never got drunk there just had a few drinks and shot some pool. i was only there during bar hours for a friends birthday or something like that. id say 90% of the i went there it was still light out so i didnt run into young drunks full of piss and vinegar looking to start something.
-
Mosin archangel stock
is this one of those "tacticool" drop in stocks? if it is, i feel bad for that rifle... its almost like taking a perfectly good sammich that the old lady just made for you just the way you like it, taking it to the driveway, slamming it on the ground, running it over with you car, spraying it with the hose then eating it.
-
Russia Resists A Revolutionary AK
glorious russian platform shall live on!!! AAAHHH MOTHERLAND!!!!
-
Clint Benson, son of ex-Giant Brad Benson Indicted, charged w/ hollow point 22lr along w/ other charges
the inn used to be a decent place a few years ago. they had decent food at least. i never was there too much after around 10 pm tho. my buddies and i used to ride our pit bikes from ringoes to the jumping bridge in three bridges then go to the inn for some beers or to the pizza shop down the road after swimming. i havent been there in awhile tho. i havent heard any news on the kid he hit. i hope he is fully recovered. but i hope benson rots in jail for being an a$$hole
-
CT residents can't buy stripped lowers?
if a stripped lower has to be transfered as a handgun, why do we not need a p2p to buy one?
-
Help me build my first AR!
Bcm Is The Way To Go. Quality Product By A Quality Company. I Cant Wait To Finish My Build And Shoot It.
-
Online gunsmith school?
I Am Very Interested In Doing Something Along These Lines As Well. Shan Do You Suggest Going To A Machine Shop And Just Asking For A Job? Im Fairly Confident In My Ability To Learn To Run Metalworking Machines But Have Never Really Done It Before. I Mean They Are Only Machines A Can Only Do What You Tell Them To do.
-
milt sparks holsters
Its A "Convience Fee". If You Want One Now Pay 150. If You Can Wait 4-6 Months Buy Directly From Milt Sparks.
-
What's with the sudden URGE from everybody buying mosin's?
i highly doubt you need them. but from the rate you buy guns if i had the income you do i would buy them anyway too. but seriously i have no need for a mosin. im buying a svt in the near future so ive got the 7.62x54r covered...
-
milt sparks holsters
[email protected] That Is Allan Yoast's Email. He Is Amilt Sparks Dealer. He Had 5In 1911 Vm2s In Stock As Of Monday. Thats Where I Bought Mine From. Fast Shipping And Very Pleasent To Deal With.
-
milt sparks holsters
I Use One For My Emp. Check Milt Sparks Facebook For When They Stock Their Licensed Dealers. I Got Lucky And Got One A Few Weeks After I Decided I Wanted One. I Got One For My Buddy Too And i dont think Hes Ever Used It. I Could Ask Him If He Wants To Sell it.
-
scope for henry .17 hmr
i think a trip to cabelas might be in order this weekend. i hear all those bargain cave scopes calling me.
-
scope for henry .17 hmr
i will not buy from those antigun a-holes but i will check them out from another vendor. it sucks too because i have a $100 giftcard from there too. is 3-9x the ideal magnification?
-
scope for henry .17 hmr
so i recently acquired the first my first gun that actually warrants some decent glass. i've never bought or really shot with a scope before and i have no clue where to begin. i'm not looking to spend more than $3-350. what power should i be looking at? i've shot this exact gun before it got it and the iron sites are dead on at 100 yds. i just feel the full potential of the .17 hmr round can't be reached without magnification.
-
Recommend a good gun for the kids
as other have said, get them a single shot 22. i personally would not put any glass on it until they can get 5 shot groups under a quarter at around 15-20 yards. once they learn to shoot with iron sites everything else will come easier. then if they ever need to make a shot without a scope they wont hesitate. i grew up shooting iron sites and still im better than most of my friends out to 100 yards when they have scopes. plus, nothing is more satisfying than an old timer complimenting you on hitting the clay birds on the back stop at 100 yards before your friend does with his scope.
-
Shotgun Shootout! Changed to May 18th at Clinton WMA
That Looks LiKe A Weird Game Of Just The Tip.
-
Garand Guy
Could Be A Bent Operating Rod. Or Something Wrong With The Follower Mechanism. I Would Replace The Op Rod And See What Happens.
-
Garand Guy
what kind of stoppages are you getting? that might help us figure out what could be wrong.
-
henry .17hmr
any specifics?
-
henry .17hmr
thanks guys, now i need to find some decent glass to put on it. any suggestions? ive never shopped for a scope before or really ever used one for that matter. but i think the 17 hmr needs it to be brought to full potential. ive shot it before and this thing is a tack driver.
-
henry .17hmr
so after my buddy's dad passed away last year he acquired a bunch of guns. he really didnt know what he had and sold most of them for way less than he should have (python for $500 anyone??) i told him that if he had any lever guns i wanted first dibbs if/when he sold them. well he brought back like 3 lever guns and proceeded to sell 2 for way less then he should have got to someone who wasnt me. needless to say i was pissed and he told me i could have the .17 when he decided to get rid of it. well yesterday that day finally came. i traded him my old 1980 gs450 for this sweet little guy and a 12 ga. pump that i havent picked up yet. what do you guys think?
-
Help me build my first AR!
i got the lw 14.5 mid length upper with the bcm gunfighter mod, 1 comp. because it is a 14.5 in barrel they have to pin and weld it on to sell it as a non nfa part. the comp is 1.5 in which brings the oal to 16 in which is the minimum. as far as the stock, as long as something needed internally to make the gun go boom isnt there i would feel fine ordering it right to my home. i did and just took it to my fiends house to grind off the fsb and bayo lug. i wanted a low profile gas block but i couldnt switch it as the comp is welded on. so i just took a grinder and chopped it off. took all of an hour taking my time and smoothing everything out as best i could. a coat of cold bluing and it looks pretty decent you people really make this whole process a lot more difficult than it really is. read the laws and follow them.
-
Help me build my first AR!
If He Doesnt Have A Stock Yet The Gun Wont Work So He Can Have It Shipped To His Home. The Only Thing That Needs To Be Done On A BCM upper Is The Bayo Lug. 5 Min With A Grinder And Hes Good To Go. I Hav That Exact Upper And It Is Top Notch. my Build Isnt Done Yet But The Fit Finish And Feel Is Great.