Everything posted by JT Custom Guns
-
Hi from Montgomery Twsp
Welcome to the forum!
-
please provide clarity on this deal.. PSA rifle with optic
Add in the following: Freight (if any) Transfer fee (from your FFL) Cost of a Muzzle Break Cost to pin Muzzle break to barrel Cost to pin stock Cost of a NJ comp mag (unless they will substitute one for you) Then - if you fell it's a good deal - go for it..........................
-
Maximum Shells in a Shotgun
Unless your hunting.........................
-
zk-22 whats it worth
That link went to a Sign-Up page for me as well.........................
-
First time selling a pistol...what to expect
What guns are you selling?
-
FID and 3 P2P's - Picked up today!
Come on over and see what we have in stock. I'm pretty sure we have something you will like, I mean need............ Lol
-
Does anyone own a 1/2 x 28 tpi Die set? I'm in need of some assistance PLEASE!
Just as a observation, or suggestion - when you thread a barrel you MUST have the threads in perfect line with the bore of the barrel. if not and the brake is not perfectly aligned when installed - you could have a big problem. If you are not perfectly sure of what your doing - it's best to leave it to a professional. JMO Good Luck!
-
Lets see your Dog aka 1st line of defense for some...
Pete - As soon as you said smart, i know you were blowin' smoke!
-
Best 1911 for under.......
I like the quality of the following guns: Para USA Citadel RIA I sell all three, and I have a few Para Expert models in stock in both Tactical Black & Stainless for under $650.00
-
Lets see your Dog aka 1st line of defense for some...
Diva, Our 168lb Female Great Dane Not the sharpest tool in the shed, but a great watch dog and companion................
-
So Proud of my little brother! He's back from Afghanistan
Glad to hear that he is home safe. Please Thank him on my behalf for his service to our country..............
-
OK you AR guys I'm looking for a 223 - 5.5 muzzle brake
Basicly - A Muzzle break is very much like a Flash suppressor except it has a closed exit port with a hole drilled just slightly larger than the bullet diameter to allow the bullet to exit. the closed end acts a baffle to restrict some of the gas that is exiting the barrel and re-direct it to the side(s) of the break - when the holes are drilled only on the top this acts a a compensator and helps to reduce muzzle climb. A Flash hider has an open exit port because it's only function is to reduce, or in some cases eliminate the flash from the gases exiting the barrel. So - If you install a solid (no holes in the side) barrel extension, then you have just extended the barrel, no problem. If that extension has holes drilled into its body, it could be considered a flash hider. i'm not saying it is, I'm saying it could be and as we all know in New Jersey - your most likely Guilty until you prove yourself innocent.........
-
OK you AR guys I'm looking for a 223 - 5.5 muzzle brake
This is a VERY GOOD example of what to look for when buying a break. the link above is to a barrel extension NOT a break. As you can see the exit port is open and there is no baffle to break the gas. Now, technically - if you were to install this on a barrel and pin it you will have accomplished two things - One you will have eliminated the threaded barrel BUT Secondly (an most importantly) you could be considered to have installed a Flash hider since the extension is ported but not baffled. Again - it all up to interpretation, but I wouldn't want to have to try to convince some prosecutor that it doesn't hide the flash (because to some extent - it will).
-
OK you AR guys I'm looking for a 223 - 5.5 muzzle brake
I assume Paul's guy can do it since the Flash hiders he converts really come out well when done. If your gonna do it yourself - you can paint it with High temp heat paint. I have seen guys do it and it comes out well, if done right.
-
OK you AR guys I'm looking for a 223 - 5.5 muzzle brake
Take that one you original posted and ask Paul to have his guy weld the end like he does with his Branson style Brakes. Basicly you just need to make sure the threads and the exit port are perfectly in line and your should be good to go........
-
OK you AR guys I'm looking for a 223 - 5.5 muzzle brake
Are you looking for an actual Break, or just a cool looking barrel extension?
-
OK you AR guys I'm looking for a 223 - 5.5 muzzle brake
If you read their description - they refer to it as a Flash hider! People are amazing when it comes to selling these..........
-
New guy from Burlington County
Welcome to the forum! A lot of useful info. here and a great bunch of guys. Good Luck! JT ps: if you need anything - Give us a call..............
-
Show us your 1911's
Dave - I'm very jealous of that US&S...............
-
Another +1 for JT Custom Guns
I'm humbled - Thank you!
-
OK you AR guys I'm looking for a 223 - 5.5 muzzle brake
If Paul doesn't have a 5.5" brake - call me and I can have one made for you.........
-
OK you AR guys I'm looking for a 223 - 5.5 muzzle brake
You may already know the difference, but just in case you are not sure a Muzzle break and a Flash Hider have on basic difference: The Flash Hider is open on the end The Muzzle break is closed (Wit ha drilled hole to allow the bullet to exit of course) I'm not familiar with the model you post the link to, but unless it has a baffle somewhere between the lug the threads on the barre and the exit port - it looks like its more of a shroud or FH / compensator than a Muzzle break You would be surprised how many people sell items and call them Muzzle breaks when in fact they are Flash Hiders - it is freakin' amazing! The break that Paul listed above is small, light weigh and very well made. and it looks like a FH for those who want to keep the "look" of their original AR.
-
competent gun smith to thread a shotgun barrel
Sorry - Typo on my part!
-
competent gun smith to thread a shotgun barrel
There is nothing in the State Stautes that says a Semi Auto Shotgun cannot have a threaded barrel, or that a break needs to be pined / welded BUT if the barrel is cut to less than 18" than ATF rules apply to an SBR and then it would require the barrel to be pined or welded.
-
Show us your 1911's