Everything posted by kirk2022
-
Advice on 22lr handgun for plinking & fun
Thanks for the heads up on the discount, I will see if I can put one on Backorder with sig. Picked the gun up the morn went to the range and ran 100 rds thru it. Nice shooting gun right out of the box after A clean and lube. Had A couple hiccups but no worries, I will run it some more and be good to go.
- Advice on 22lr handgun for plinking & fun
-
Manners elite hunter stocks
I have read some on the Manners stock, But personally I went with Boyds Gunstocks for the 2 Rifles that I did with aftermarket stocks. Check different Rifle forums and you will find many opinions on stock makers. The Boyds stocks that I have used are very good in my opinion.
-
anybody know garage doors?
Wayne Dalton makes A side mount opener for their torsion system. You might want to see if you can find A Wayne Dalton dealer near you and look into that. And yes even the most experienced door guys are cautious with torsion springs.
-
Hello from Vineland
Another Welcome from Millville. A Cumberland riflemen member here.
-
Fortress safes
Check that price I'm pretty sure it is going lower for fri
-
Fortress safes
Checko what store number. 1816. Here
-
PP in under 30 days - It can be done
Dropping off paperwork today in Millville for 2 P2P. Last set was right about 60 days. hopefully these will be quicker. There is A new Sig just calling my name at Buds Gunshop!
-
oral surgery
This ied s A post to take heed to if you have bad teeth! At the age of 42 I had A heart attack. I remember the day I was discharged from Deborah Hospital. The Dr. that treated me said If you dont want to go through another Heart Attack get your teeth taken care of. Yep I did, Had receeding gums and an infection. They were not in good condition, Never took care like I should of. Now they are gone and I have both upper and lower plates. I have been told by numerous Drs that bad teeth lead to possible heart problems.
-
Cumberland Riflemen Members? I have A question
Any members of Cumberland Riflemen, I am A new member there and have A question. PM if possible. Thanks
-
PA Non Res CCW???
Thanks Guys sorta knew the answer but thought Id throw it out there. we will consider it done
-
PA Non Res CCW???
Thanks for the reply Read that during research, But Utah has A similar requirement in all of their righting, but as we know, utah issues to NJ residents. Just looking for some thoughts before I stop by the Sheriffs office on Wed. Wont be A wasted trip as I will be in Pa all next week.
-
PA Non Res CCW???
Has anyone applied for and been issued A Pa Non res CCW by using A Utah Non Res CCW? After searching it seems there are some friendly Sherriffs over the bridge. Thought if it was possible to do, it wouldnt be A bad thing to have just in case something should happen with Utah Recip. I am aware that would be unlikly but you never know with the AG in PA right now
-
Vineland area gun range
Not sure if they are back operating yet after the fire but he can check with Bobs in Glassboro. Indoor range. Or he can check out Usanna MTS in Elmer. There are 2 other ranges in the county, But he would have to check on new member status, to see if they are taking new members. Mullica Hill rifle and pistol on rt 347 down near Leesburg. Cumberland Rifleman in Millville. I pretty sure membership is full at Cumberland though. Being from the area for every I would be real edgy pulling the triiger anywhere besides A real range. Im on 22 acres and I not shooting anywhere but the range. Just to say
-
Recoil Reducing Stocks
You Say it is A synthetic stock, Is it solid in the butt area? If so its A 1 Dollar fix. Take the recoil pad off and drill 2 holes, 1 top and 1 bottom. Insert A roll of pennies into each hole, reinstall recoil pad and whammo fixed. Oh damn the guy that told me about this said it was a Secret, So dont tell anyone
-
camping and shooting
Go online and search PA Gamelands. You will be able to buy the shooters permit online. dont forget to print out your permit as they will not mail 1 to you. it is valid when you pay for it. Yes you will need A permit for each shooter. You can also search what areas offer as far as shooting goes and that will help you to plan your trip. Enjoy
-
camping and shooting
As an avid camper for many years, But not claiming in any way to speak NJ's demeaning laws, I will give this question A try In NJ we have the do not deviate law. You would not be traveling to or from a Legitimate range, Gunshop, Gunsmith, or sanction event. you would be traveling to A campsite most likely on private property, or worse A State park. You will be breaking the law! Now in Pa. you can purchase A State Gamelands shooters permit for 30.00 A year and shoot at any of the State ranges. We go to Pa A lot to camp. and yes I do carry with proper CCW Permit. BUT some not A majority of Campgrounds have A no firearms rule.Again private property and you must abide by the owners wishes. Unlike NJ they dont need to post A no firearms rule. You let someone see you carrying in A Majority of NJ cG s you are going to jail. Do yourself A favor go to PA buy A Gamelands shootrs permit, go to A nearby State range and have A good time. Step carefull with your thoughts on this matter, you are in NJ
-
Bill S-2735 (Marlin 60 .22) ?
In reading this bill sponsored by Jeff Van Drew. I have A question guys. Paragraph Y Specifically speaks to the original Marlin 60 tubular magazine. If I comprehend correctly, The original Marlin 60 is now no longer considered an evil assault weapon, with its original 18 round tube magazine. Is this .22 rifle now exempt from the large capacity ban? Sorry if I seem vague just seeing if I am reading this right.
-
Go carts
Sporting Clays are just down the road A bit from NJMP the pic that pops up of shooting is from Cedar Creek Sporting Clays. Has nothing to do with NJMP Karting
-
2nd O/U skeet/ trap and local dealer
By the way I see you list So Jersey as your location, Dont know where you are but if you want we can get together and I can help you with the fixes you need
-
2nd O/U skeet/ trap and local dealer
The auto safety is easily disabled leaving you wit A manual safety. also you may well be having A light primer strike on the second shot. to make sur you are getting good hammer strikes you can tighten the adjusting spring on the hammers by turning the nut clockwise. Dont turn it much, 1/2 turn max. both of these operations are accomplished by removing the stock and pulling out the firing mech. both fixes can be done in about 10 minutes. you have to get A 3/32 roll pin to do the safty mod before you start the process. Also do you by chance have A recoil pad on that gun? If so that is effecting your inertia reset. I wanted to extend the stock on mine and found out about the inertia reset. So I made my own extension from wood cut and stained to match the stock and reinstalled the standard recoil pad. loads of clays shot with no malfunctions. Hope this helps.
-
UTAH CCW?
Recieved mine this past fri. exactly 60 days from the time Utah BCI cashed my check. Total time from class to in hand 81 days.
-
UTAH CCW?
Welp looks like the wait will just continue for A while. Not like we arent used to that anyway.
-
UTAH CCW?
Took Class April 8. Utah BCI withdrew funds April 29. So with that timeline maybe I will recieve mine shortly. Hopefully
-
First gun for clays. Plunge right into the O/U or not?
All guns are made to shoot. The shooter (you) are the final link. Those fancy 3,4,5,6 thousand dollar guns are great for lookie here boys. Myself I have A Stoeger STF3000 from Dicks. Shoot Clays and trap with it. Last weekend we went out to the trap range. Windy I mean steady 25 MPH winds. The first round we stepped up to shoot, I had A guy say to me, You want to borrow A gun? I just looked at him and said nope I've got one. When that rd was done I hit 21 out of 25 targets. then went on to shoot A 22, 20 and 19 then called it A day. Man I wished I had one of them there fancy guns. Just get something that feels good and go have fun. Thats what its all about.