thelosticon

i just like the casv look, i didnt anticipate i was gonna run into a problem with cowitnessing. i ditched the magpul buis, got this burris ar536 5x red dot instead and gave up on trying to cowitness, i still love my casv rail regardless.

i understand they need to be at the same level maybe i wasnt clear in my original post. let me try again. the adams arms picatinny is the exact level of the upper's picatinny, and the vltor piggy back doesnt go all the way back to the charging handle, it allows enought room to mount a back up sight on the upper's flat top, so....the front and the rear would be on the same level, no problems. my question is, can i put both front and rear .48 inches higher on the stepped up portion of the vltor?

Almost done working on my upper while im still waiting for fid. After some dremel work and a lot of test fitting i finally got the vltor casv handguard to work with the adams arms piston system. im sure most of you are familiar with the casv, its a piggy back system that raises the upper receivers flat top (about .48 inches according to my digital calliper) Anyway, my magpul flip ups arrived this weekend, so my question is could i put the buis at the vltor's level (picture 3) or do they have to stay at the upper's flat top level (picture 1 and 2) the reason i want to raise them is for cowitness purposes. i can cowitness at the lower level with a low 30mm mount, but i also want to use a magnifier behind the optic, and the problem is i havent been able to find any low flip to side 30mm magnifier mounts

1. Handgun purchases by ....A. NJ resident from ........(1) NJ dealer = NICS check with a P2P and Photo ID ........(2) NJ resident = face to face with a P2P with Photo ID suggested ........(3) Out-of-state dealer = must be transferred through NJ dealer - Refer 1A(1) ........(4) Out-of-state resident = must be transferred through NJ dealer - Refer 1A(1) ....B. Out-of-state resident from ........(1) NJ dealer = must be transferred through buyer's home state dealer ........(2) NJ resident = must be transferred through buyer's home state dealer 2. Long gun purchases by ....A. NJ resident from ........(1) NJ dealer = NICS check with a FPID, COE and Photo ID ........(2) NJ resident = face to face with a FPID, COE with Photo ID suggested ........(3) Out-of-state dealer = NICS check with a FPID, COE and Photo ID ........(4) Out-of-state resident = must be transferred through ............a. NJ dealer = NICS check with a FPID, COE and Photo ID or ............b. Out-of-state dealer = NICS check with a FPID, COE and Photo ID ....B. Non-resident from ........(1) NJ dealer = NICS check with a FPID, COE and Photo ID ........(2) NJ resident = must be transferred through ............a. NJ dealer = NICS check with a FPID, COE and Photo ID or ............b. Out-of-state dealer = consult buyer's home state laws

Check out http://www.gogunusa.com/brakes/talon762x39.html. I’ve ordered on from them, looks bad ass and sounds promising, but have not yet shot it as i am still waiting for fid card, also be aware that it says it has "good" flash suppression, but it strictly advertised as a brake. Looking at mine i can see that the exit diameter hole isn’t any bigger than the barrel inside diameter, keeping with the generally accepted test for differentiating between a flash hider and a brake

Well, dont all brakes have somewhat of a "good" flash suppression by their nature? I mean anything thats gonna divert the gasses is gonna indirectly alter the flash as well. But anyway, it is advertised as a brake, not a hider.

purchased one of this brakes http://gogunusa.com/brakes/talon762x39.html Was wondering if its normal that it doesn’t have any marking on it what so ever, no manufacturer logo, no country of origin, nothing. The website says its made in usa and the packaging that it came in does as well, but nothing on the brake itself. I guess my concern is, how do i prove that it’s a us part for 922r compliance and also how do I convince a potential someone that’s going to accuse me of it being a flash hider.

i put in for 3, but now im thinking that maybe i just waisted 6 dollars because i really wanted to do a ak build before anything because theres a saiga thats got my name all over it just collecting dust in my brothers safe.

hello everyone. been checking out the forums for a few months now, finally decided to pony up the $36. I figured it was the least i could do for such a vast amount of usefull information. Dropped off my application to ventnor city pd just a few hours ago, and already scheduled my fingerprint appointment, i guess all thats left is to wait.