Everything posted by louu
-
GFH Radio 143 10 Round magazines? Come and take them!
That's awesome lol. I will probably take you up on this. By the time my Utah comes in it should be good MC weather and will probably take a ride up there. Thanks guys
-
EVERYONE Please invest 32 seconds!!!!
I'm all over it, thanks for the heads up.
-
GFH Radio 143 10 Round magazines? Come and take them!
I just mailed out my Utah, what do I have to do to get my virginia?
-
Getting Started in Reloading
Got a range report.. Went with my Uncle and a friend to Quinton Sports mans club today and shot sporting clays and man what a perfect day. After that we went back to the pistol range and I tried out Clays loaded at 4.0 grains and AutoComp loaded at 6.1 grains both the minimum weight by the book, well, Auto Comp is 6.0 grains but I like the disks better than the Charge bar and the closest disk puts out 6.1. Both were at 1.25 OAL and it feeds perfect, don't even notice the action cycling. I had about 15 stove pipes out of 400 rounds with factory ammo and have not had one with my ammo. The Auto Comp is the winner in my book because it has less recoil. As a control I loaded one of each in a mag and had my Uncle shoot it and tell me witch one had less recoil. I didn't tell him witch one was witch, not that he would know lol, and he said the Auto comp. According to the book this load of Auto Comp should be at 789FPS so that should be good for heavy. Gotta find a crono though. I still need to put better sights on there so I can get more accurate but I was shooting pretty good today (when I took my time). All in all, great day...
-
First time IDPA shoot
Thanks guys, one odd thing I been wondering for a while about IDPA and USPSA is do they give you time to go back and pick up your brass or does the next squad just roll right in and stomp all over it.
-
First time IDPA shoot
Does SJSC have a flyer or anything for that match? I cant find any info on their sight? Do you have to be a member there?
- Getting Started in Reloading
-
Getting Started in Reloading
I really like and priming so I don't think I'll go with the auto prime system. Hey Hunting are those red things cases for set up turrets? If so where did you get them? My next gun is the Shield in 9mm and will be rolling my own for that one too so I will be getting another turret set up for that soon. I really need to slow my spending as of late, my permit will be usable at the end of the month. I'm gona get the gun then TRY not to get too much else for a while...
- Getting Started in Reloading
- Getting Started in Reloading
-
Whats the best .45 powder
I'm diggin this... Thanks guys
-
Utah CCW Class in Millville 2/20/14
Check the site I posted, they have more dates, maybe one is up by youze guys.
-
Whats the best .45 powder
- Utah CCW Class in Millville 2/20/14
http://concealedcarryusa.us/ I don't know much about these guys but its $151 at the Fairfield Inn in Millville. Its at 6 PM. Ill be there.- Whats the best .45 powder
It also kinda sucks that some are measured in CUP and others are PSI. Is there a good chart that has all powders in one measurement?- Whats the best .45 powder
Okay fellas I have a few questions... been working alot and havent had any time to do any loading so I been doing alot of reading. Please correct me if I'm bass ackwards here.. Right now I kinda undersatnd it as a powder with a slower burn rate can be laoded to the same pressure as a powder with a fast burn rate and the slower burning powder will give you more FPS because its driving the bullet for a longer period of time. Now, Why is Clays so great if its number 10 on the burn rate chart and something like Auto Comp is number 43. Wouldnt the Auto Comp have less recoil and be more accurate because of that? School me please...- Getting Started in Reloading
- Whats the best .45 powder
I found the last jug of Clays in the whole world!!! I also got a jug of Auto comp because they said it will meter more consistent in the Pro auto disk. I would like to use the Clays but if it doesn't work in the Auto disk I'm probably not going to use it. That's the only powders I could find on this whole thread. They had a Power Pistol left too but for some reason I got the Auto comp instead.- New to Reloading
Also this guy http://www.nereloading.com/index.php/ is somewhere up around your parts I think, call him, super nice guy, he has primers and bullets in stock and you can probably drive there and pick them up. One more thing... Amazon has all the reloading stuff cheaper than Cabelas- New to Reloading
What's up 1980, me too... I'm new to reloading too and just got the Lee classic turret press and really suggest going with that one or one like it. I thought about going with a single stage press but it would take hours to do one box on one of them. You can use a turret press as a single stage press if you are a little intimated by reloading but Ill tell you that its really WAY easy-er than you think. Watching videos and reading all the tons and tons of info on the net is a little overwhelming but once you get the stuff in your hands, do some reading and understand the parts and stages its a breeze. Here is the thread I made with some info on it. http://njgunforums.com/forum/index.php/topic/66045-getting-started-in-reloading/- NJ2AS Monthly meeting and Emily Miller Speech and Greet 2/12
She might shoot you for that...- Getting Started in Reloading
- Getting Started in Reloading
Ah ha, makes sense lol. I was just reading the rules for USPSA trying to figure out what I need to qualify for heavy and I couldn't find it in plain English. I just want to know whats the min FPS for a 230g bullet for heavy. In one of the parts on there it kinda looked like they don't factor in the fact that some powders don't need as much of a charge as others to get the same FPS. I'm going to just go to my first one (as soon as it gets a little warmer) and just learn it all there. Do you shoot USPSA? Ill probably be heading up there this summer for some matches. The last part is pretty cool, its just like a compression ratio in an engine. I went to the range yesterday and loaded one factory Remington round and one of mine at 4.4 on top of that, just shooting two rounds at a time at two different targets next to each other. I did notice that my rounds feel a tiny bit smoother and just a hair less kick. I think I was a little more accurate with my rounds too. I cant really say to much on accuracy though because I'm having a little trouble with my sights and I was FREEZING! I was shooting at about 60 feet.- Getting Started in Reloading
Thanks again T Bill, I'm a big time brass picker upper lol. I love recycling. Whenever I see someone at the range getting ready to throw out their once fired brass I always ask if I can have it. I checked most of this brass before I reloaded it, the case length were all with in .001 of about ten factory rounds I measured. That was after I resized them. What do you mean by target load? I also want to ask you how you came up with that load. I know that's well in the safe range but I understand that if you decrease OAL your also decreasing the CC's and increasing pressure. Is there some complicated formula to figure out your pressure? I read through the chapter on pressure but it was a little hard for me to understand. I kinda got the impression (and Lee also says in there) that its not really necessary for a beginner to understand it.- Getting Started in Reloading
Thanks Nikos, I don't think ill ever ditch the hand primer though, its one of my favorite parts (yeah I'm weird) it gives me a chance to inspect all the cases and make sure I don't end up with a high primer before I charge it. Do you or anyone else know it IMR 700X meters well through the charge bar and pro auto disk? Its considered a flake powder right??? I seen a video on Youtube of a guy saying that graphite spray on the inside of the hopper and the disks or charge bar gives you perfect measures every time. Any comments on that? - Utah CCW Class in Millville 2/20/14