Everything posted by son of sam
-
Bottom Ejecting Shotguns
I have had the pleasure to shoot the Ithaca in 16ga and its a very fine pump gun. I also owned a BPS that I have since given to my son. The BPS is a flawless tank of a gun. You cant go wrong with either.
-
Snakeheads
According to the interweb they will survive for a fair amount of time in salt water. Are the fingerlings/fry easy to distinguish from other desirable species?
-
Hunting and Fishing from a Kayak
I like the Jackson about equal with the OT. Ocean and a few others also have similar. I plan on waterfowl from this rig so stability in cold water is key. The sit on tops seem to offer me the best chance of recovering if I should go over. What are you doing in extreme cold water? Some guys are recommending a dry suit. I could skip second season in Jan. But, I would like to make it till the end of December. I think water temps are still in 50's most years.
-
Hunting and Fishing from a Kayak
I would also be interested in places to look for used rigs other than craigslist.
-
Hunting and Fishing from a Kayak
Family has decided that they want kayaks. To me this is an opportunity to get back to hunting and fishing. I have to get my wife a yak for rivers and lake sport, my daughter (11) something similar but it needs a rod holder because she will likely do some fishing also. For me I am thinking of the Old Town predator 13. I want something that I can fish in lakes and maybe a little back bay/marsh. More so I want something that I can load a dozen dekes on and paddle to the back of a couple of lakes in the area and have some waterfowl time. Anyone else on here use a yak for similar? Any issues with my choice in yak for the intended use? I also considered the Hobie Outback mirage. Its a solid contender and offers the mirage drive as an option. Downfall is the price, weight and I dont think it paddles as well.
-
Underfolder stocks
Thanks for the offer Jack. My question is only if it can be done. I have the ability to bring it into a local FFL (friend of family) and do the mods myself at his address (im a machinist) before transfer to me. Im way to cheep to pay for services. lol
-
Underfolder stocks
I find a lot of good deals with AK's that have underfolders rather than a nice NJ legal stock. If I purchase the AK and then replace the furniture it kind of ruins the bargain. I like the look of the extended underfolder also. Can they be pinned and made NJ compliant? I want to make sure and get this right. The underfolder AK and Uzi are the poster child for the NJ law.
-
Underfolder stocks
I find a lot of good deals with AK's that have underfolders rather than a nice NJ legal stock. If I purchase the AK and then replace the furniture it kind of ruins the bargain. I like the look of the extended underfolder also. Can they be pinned and made NJ compliant? I want to make sure and get this right. The underfolder AK and Uzi are the poster child for the NJ law.
-
Which Press for 500 rounds per month
I bought a Lee Loadmaster for 9mm a couple years back. I used cleaned and tumbled pickup brass. What I found is that the priming was a huge issue. Residue etc left from firing prevented even seating of new primers. So I ran everything through the press to deprime and size only. Then cleaned them and tumbled them before loading the brass back into the Loadmaster to prime, powder, load and crimp. Since then I have used the Loadmaster single stage as well as purchased 2 single stage presses (Texan and a Lyman) when doing the low volume stuff like 460s&w. IMO the time savings of a progressive is minimal at best. The OP doesnt seem like what I would call a high volume shooter. At the time I bought the press I was shooting about 2000 rnds a month of 9mm and prices spiked $15+ a box. At the current rate of around $11 a box I dont use the press at all.
-
Shops in NJ that have Old Military rifles?
I know this is kind of old thread. Bob Little Sports Shop in Glassboro has some from milsurp stuff, Butches in Vineland usually has 6-10 milsurps hanging around. I dont know of any shops that buy up milsurp. But, they all will take on trade or consignment.
-
Action News “Arming Yourself Against the Active Shooter”
I just watched the clip on 6abc website. I thought it was fair, well balanced and informative. Actually I am very surprised that a Philly station (liberal) was so fair about the subject. Happy to see the "main stream" media tackling the subject and letting people know that gun owners are not gun nuts. We walk among everyone else. lol
-
convicted felon statute of limitations.
I have a friend who was convicted of possession of something like 8lbs of pot when he was 18 y/o. Not sure of the prison term or if he even went, I know he moved to CA for a while. lol Anyway he is no 40ish, never had anything more than a traffic ticket since, business owner, a pillar of the community. Unfortunately once a felon, always a felon. He may never possess a firearm in the US again. I should also mention that to my knowledge a felony conviction cannot be expunged. I would never take him to a range with me even if he wanted to go, I would also never hand him a gun to "check out". It sucks for those that have similar convictions. However, no one made them possess the pot. They knew it was against the law when they did it.
-
Alternative for EDC
I should have checked back sooner. I looked at spyderco but I am not into that tactical look. The Stockman really did fit my uses best so I picked up another one (not easy to find US made) as a spare #7457 But at the same time I wanted to try something slightly different. I bought a German Boker 112626BBL I bought them both off of eBay as I found the best pricing there. Both are shaving sharp from the factory. Usually I find that factory edges need a little tuning for my taste. Someone else mentioned that they felt their Buck Stockman didnt hold an edge. I use mine (the old one) to open boxes debur nylon,teflon and other plastics as well as sometimes brass,aluminum and SS. Anything more than a light scrape on SS will certainly fold the edge or dull it. I would expect similar results from any blade other than maybe D-2. I like the heavy blade on the Buck and hope the Boker will yield similar results. I very fine edge is not controllable to debur plastic without getting chatter in the finish. Use of thin blades like exacto will dig to deep and chatter. I should also not that I normally sharpen one of two ways. I use a 1" belt sander with a very worn 320 grit belt (I save them for this purpose) and also a Smiths. Sometimes I will give a quick dress up with a steel or a scotchbright unitized wheel. I use my knives hard but I guarantee that you will bleed if you drag it across your hand. The lost Stockman blade was about 1/4" shorter and much narrower after about 8 years of daily carry and use.
-
Alternative for EDC
I have carried a Buck Stockman for many years. I really only use the clip blade. The sheeps foot and spey are nice but not required. I like the edge and durability of the 301 Buck. I would like an alternative. I am willing to spend in the $100 range. I am a machinist and I use the knife a lot. I cant see myself wanting to beet up on a more expensive knife. I noticed that many quality manufacturers are now manufacturing in China. I will not carry a chinese POS. German, Swiss, USA maybe some other origin of manufacture will work.
-
Small business owners, please step in here
You need a detailed business plan before anyone will consider financing. What is the business? Who are your prospective customer? How will you make money? Why are you qualified to make the business work? etc.... As a business owner, I would be very cautious about opening a business in NJ when we will have Sweeney as a Gov. in another year.
-
PSA on AK's
I dont think that anybody can make a realistic argument that an AK can compete with an AR for accuracy. But, it doesnt take away the fact that they are really cool guns and very worth owning. It didnt get to be the most common gun in the worl for no reason.
-
Here's the new Kimber revo-
I like revolvers and pretty much every metal gun out there. I have also had very good luck with Kimber 1911's and rifles. If I was in the market for a short barrel handgun I would likely get one of these. But, shortest revolver I own is a 5". Overall its a good looking revaolver and im thrilled that a new brand choice is available in revolvers. There are only a handful of quality revolver manufacturers S&W, Ruger, Korth, Magnum Research I cant think of any others off hand.
-
Complex transfer, need advise
My son is currently in the police academy. The reason we wanted to get this done is to get a jump on the firearms training and qualification portion. He has limited handgun experience, shoots shotgun often. Once he is complete the academy they will issue him a handgun. If he fails to pass/qualify the handgun potion (which is much stricter than either of us thought) then he wont need one anyway. He is allowed to use the police range with his gun and ammo as often as he wants. At this point, its a rather dead subject. There wont be enough time to make the transfers and get enough trigger time to be helpful.
-
Complex transfer, need advise
We are not talking about a STRAW transfer/purchase. I asked the questions to make sure that I am in compliance with all State and Fed laws.
-
Complex transfer, need advise
Thank you for the information. It looks like I would have to transfer through and FFL to a family member over 21 within the state of NC. He could then obtain a permit and do a F2F with that person. I may find him a private seller in NC with a handgun that he wants. Thanks for the help.
-
Complex transfer, need advise
I live in NJ and my 20 y/o son is a resident of NC. I would like to give him a handgun, Beretta 96. How can I do this legally? If I send it to a FFL in NC I dont think he can take possession from a FFL until he is 21. Can I drive it down to him and give it to him F2F? What would I need to fill out if anything?
-
Where can i buy angle irons?
Yarde Metals, EMJ Metals, Metal Stock, Online Metals. East Coast Steel, Fazzio. I dont know your exact local but these places are all over NJ and PA. In some cases you may be able to get the angle in alloy steel rather than 1018. Also dont discount bed frames. They are alloy steel (like a spring temper) and much stronger than the average 1018 you will find at HomeDepot or Fazzio.
-
Arrest for the 16th round
I heard a similar story from someone involved but not at the scene. As I was told he was pulled over for a traffic infraction and was smart ass or otherwise belligerent with the LEO. LEO asked to search and he gave the OK. The mags were pinned high cap AR mags. 15 rounds fit in and functioned as they should. 16th round would not go in. UNLESS you forced it in and under the lip. The LEO in question saw the high cap mags and investigated further by loading the mag to verify the story of the owner. My buddy (FFL) was the one who pinned the mags. He still pins mags, but now they are all pinned to 14rnds. To my knowledge this is still pending trial but the victim was arraigned and made bail. IMO he will bet the charges. At what price? Personally, all of my mags are 10rnds 9a few less) it makes it easier to count when your shooting plates or whatever. AR,1911, 22's all 10 rnds.
-
Spanish Mauser to 7.62x39
Spanish mausers are well known for failure with 308. 7.62x39 is a cheep learner with surplus ammo and very capable of accuracy with quality ammo. Also has plenty of power to take deer out to 150 yds or so. Offers very low recoil. Its not about low performance, more about enough performance.
-
Spanish Mauser to 7.62x39
I was given a very rough 1893 Spanish. I know they are week old actions so I decided to build it into a 7.62x39. I picked up a mag block from eBay and a 21" barrel from gun parts corp. Plan on trueing the action and lapping the lugs as I put it together. I glass beaded the action, draw filed and beaded again to improve upon the rough machining and generally poor appearance. Plan on finishing with duracoat type finish. This should be a great first centerfire rifle for my daughter (10y/o). I still need a cock on open kit and probably a wood stock. I think the old milsurp stock is in to poor of condition to reuse. From people who have done this conversion in the past is there anything I should be aware of with the conversion? Any down side? Anyone have stock in decent shape or any other parts they want to get rid of?