Everything posted by TonyS.
-
What is your go to EDC blade
I have more knives than I actually carry. My EDC has been my Victorinox Cybertool 34 and/or my Boker Trance. Funny thing is I've got "tanks" too, but the Trance has handled _every_single_task I've asked of it over the years. Sure, the edge has taken a beating but that's what sharpeners are for. It's light, flat-ground, thin, and extremely comfortable. "Who could ask for anything more..." as the song goes.
-
Desktop or Laptop?
Linux distros still aren't near Windows with regards to driver support just because Windows is obviously so widespread. I've ran Ubuntu, Mint, Redhat, Suse, and a few others. I've no fear of command lines, yet I do not suggest to the average user to switch to Linux. Yet, that's another thread in itself. To the OP: you will need at least 1GB of RAM memory to run Win7 somewhat satisfactorily. Run the Win7 Upgrade Advisor. See what it tells you. You may find Win7 might not have a driver for a particular piece of hardware you're running, but there's ways around that. If you're feeling adventurous then try a Linux distro like Mint. You may grow to like it. Otherwise, try OS/2. j/k. It just may be time to bite the bullet (pardon the pun) and upgrade your system, which you can do for under $800. Check out Newegg or Microcenter.
-
Basic reloading classes
FWIW, Chet and Dawn are good people. Dawn instructed me in NRA Basic Pistol. If they offered a class in something I'm sure you'd get your $'s worth from it.
-
Desktop or Laptop?
Laptop, desktop....it depends what you need to hook up to it or intend to in the future. With a desktop there is generally greater flexibility for expanding. Also, if a component like a video card bites the dust it's easily replaceable. With a laptop, usually not worth trying to replace a component. The whole thing with laptops are portability. Do you need that? If not then get the desktop.
-
Is SSN on NJ NICS mandatory ?
Definitely not required. If you have a common name though it helps the 4 folks handling NICS to get your results back to you quicker.
-
Baofeng UV-5R or other brand.
Try Cheapham.com. I think he's down in Lakewood and might be able to get it for you.
-
Hornady revised PTX dies?
The Redding 3-die Pro set contains the deprime/sizer, seating, and taper crimp dies so I won't need another crimp die. I've been doing more research on Hornaday's new PTX dies and they seem to be OK now. Very few complaints, whereas the old ones were considered by most to be useless. As for the powder check, I figure it can't hurt. I will still use my eyes but having another way of checking isn't a bad idea, IMO. I'm an amateur machinist so I keep watch over any work I'm doing. Yesterday I had an idea of simply taking a pvc or plastic tubing and attaching it to the Hornaday bullet feeing die that they use with their bullet feeding system. I can load up the tube with my bullets and it should work fine, though it may not be as snazzy as their system.
-
Hornady revised PTX dies?
Yep. That'll be the last station.
-
Hornady revised PTX dies?
My planned setup is: 1: Deprime / Resize -------1.5: Primer seating 2: Case Mouth Expansion (flaring) / Powder Drop 3: Powder Check 4: Bullet Seating 5: Crimp I've got the carbide Redding 3-die set on the way and that'll be for steps 1,4,5. I have the RCBS Lock-out Die for step 3. So IIRC the only die component left I need is the PTX for step 2. Am I correct? Thanks.
-
Hornady revised PTX dies?
Thanks guys. I'm not getting why you say you don't need the ptx if only reloading 1 caliber. Why is that?
-
Hornady revised PTX dies?
So guys I just got my Hornady L-n-L AP last week and have started to slowly get together a list of what I need. Since this Monday I've been trying to buy Powderfunnel.com' s Universal PTX but their retailer is OOS and hasn't returned my calls or emails (left 1 v/m with Powderfunnels today, no response yet). Now I've read about Hornady's PTX dies. The older ones were supposedly useless but the new ones I've read mixed reviews on. Anyone here using a new one and how's it going? FWIW I'd be reloading for .45acp. Thanks.
-
Reload Data for Coated Lead Bullets?
Right. Got it. Thanks.
-
Reload Data for Coated Lead Bullets?
Thanks, Ronny. I'm definitely going to check them out.
-
Reload Data for Coated Lead Bullets?
Guys, I'm a beginner reloader. After months of reading and researching I've taken the plunge. I got a Hornady LnL and finally what I needed to get started except powder and bullets (still looking). For my 1911 .45 I'm planning on going with 230grain round-nose bullets, but I'm curious about coated bullets. I see Ibejiheads is somewhat local to me so I thought I'd try his bullets out. The problem I have is what bullet type do I reference when looking up loading data for these coated lead bullets? Do I go with data for lead or jacketed round-nose bullets? Thank you.
-
Looking for opinions on Subaru Forester or Outback
Hyundais are much better since 2000. You'll be happy. Everyone I know with an Elantra or Sonata have been happy with it. Good luck and many miles with her!
-
Looking for opinions on Subaru Forester or Outback
Get one. They -are- good cars. My sister has had two over the many years with more than 300K on the first one and working her way towards that on this one. I love my diesels but I'm seriously considering getting a 'ru when my truck dies.
-
Show us your 1911's
Man, those R1's are nice. That's as beauty right there! I'm really considering my first 1911 be a Remi R1 Enhanced Stainless.
-
Fair Lawn PD woes...
Never said it was. You need to do what you have to do, but peaceably.
-
.30 Ammo Cans in central NJ?
Thanks guys, especially SVT3183 (you play bass? ). I didn't know Sportsmans had free shipping so that helped keep the cost down. I should have 2 coming my way soon. Thanks.
-
.30 Ammo Cans in central NJ?
Every place I've called doesn't have them so figured I'd ask here. Anyone know where I can get one or two .30cal metal ammo cans, short of Ebay? Thanks.
-
Fair Lawn PD woes...
Escalate and dominate. Right to the top. You're paying their salaries.
-
Tech Network Help - Router/Modem
Resetting the modem should take care of wiping the router's MAC address from the modem's config file. The new router might not be sending its MAC to the modem though. BTW, spoofing the modem's MAC is not necessary. Power off the modem and router. Power on modem and wait 5 minutes. Power on router. Test connection. Just for clarification, you're using the same old modem, not a new one, correct? If it's a new modem you need to call your ISP and give them the MAC for the new modem. Also, it may be coincidence, but from your log you posted it appears your power supply for the modem may be on its last legs. Try another power supply for the cable modem. So, I would try a hard modem reset and also a new power supply for the modem.
-
Looking for a Puppy to Adopt
That's a great lookin' pup! Good luck! Whenever someone asks me where to find dogs (or cats though I dislike cats immensely) I recommend the Popcorn Zoo down in Forked River. I got my dog from there and he's the best furry buddy I've ever had, and I've had a lot. Rescue dogs are the best.
-
Tech Network Help - Router/Modem
A few questions: Have you tried another power supply for the cable modem? What firmware and version are you running on the NT66? Does the modem start dropping immediately upon hooking up to new router?
-
Silly question-Painting revolver sights.
Looks good, Malice4you. A cyclops smiley. FWIW, this is the best glow paint I've used. It comes highly recommended over at Candlepower forums.