Everything posted by Schrödinger's cat
-
What is your go to EDC blade
Cool, start a thread. Do you have a belt grinder or are you using files ?
-
What is your go to EDC blade
Does that mean you are not making your own ?
-
build or buy? with high end name brands 308
That's cool to know, I've never heard of a conversion kit like that. Thanks DT.
-
whats a good ar10? with link
Lol. No I never liked the junk there. AR15armory, very knowledgable folks without too much BS.
-
build or buy? with high end name brands 308
Btw if you don't like the AR 15 because it feels cheap just switch the handguard.
-
whats a good ar10? with link
I'm very sorry for the confusion guys, I was too vague, I was talking about the .243 LBC http://www.shop.blackholeweaponry.com/243LBC-caliber-18-length-AR15-243L-18.htm I do have a 6.5 Grendel but I've been told that the .243 LBC can be a tiny bit more accurate.
-
whats a good ar10? with link
There most definitely are AR 15 .243 and although it sounds like you didn't have a good experience with BHW by far the majority of people that buy BHW are very very pleased. On the AR forum I follow I'd say that there are a very good number of BHW barrels sold and the groups that some people are posting are amazing. On the 6.5 Grendel forum there are also many people with very good experiences with the BHW barrel.
-
whats a good ar10? with link
I don't know much about the AR 10 but it's pretty similar to the AR 15. If long range accuracy is your goal you'll do fine with a AR 15 in .243. If you want a AR 10 I'd look at 6.5 Creedmore. If build it instead of buying, it's cheaper and will be exactly what you want. Get a quality barrel, good trigger, and good optics, those are the things that matter most. Also get a decent bolt just because you won't want to deal with broken bolts. I'd look at Black Hole Weaponry for my barrel.
-
Any Input on Blade Shapes for a Fixed Blade Project?
Thanks Chris, that's a very kind offer. I have spent an embarrassing amount of time reading about knife making, but most of it was about 1080. How are you going to heat treat the 52100 and how different is it than 1080 ? I found this article very interesting, and he has a picture of a acid solution he used on a skinner that made the steel look really cool. http://poorfolkbows.com/knife.htm
-
Movin' out
Good luck ! Keep hanging out with us here !
-
Storm
I want to put in a tee just after the meter where there is an elbow. I want to change the elbow to a tee, add some pipe, a shutoff, a tee with a drip catch (or whatever it's called) and then a quick connect fitting. I feel confident that I can do this without too much trouble. Of course afterwards I'll paint the piping with the proper paint and do a soap test and meter position test. Any other tips ? Does anyone know for a fact that I need a permit when doing it myself ? The meter and regulator have enough BTU to add the generator. I think I'll also run a gas line from inside the basement to the deck so that next year I can convert the grill to NG. Perhaps I'll start a thread and post pictures when I'm done. Sorry about the thread derailment. Any tips ?
-
Storm
Thank you. Can anyone confirm that I need a permit ? After spending a few hours on youtube it doesn't look very difficult, other than the fact that my panel is in the basement so I have to go up with the wires to get them outside for the outlet. Also most videos show people putting a tee on the gas line from the inside of an unfinished basement and then taking it outside, but my basement is finished and I was hoping to put a tee outside. Is there any reason not to do this ?
-
Storm
Can anybody help me with this ? Perhaps link the old topic or try to tell me what I need to do here ?
-
Storm
Who was it that posted instructions on how to install a interlock kit ? Was that Sota ? I want to install a interlock kit and the male outlet. I also want to tee the natural gas line and install a quick connect so that I can hook up the generator easily, perhaps deerslayer can help me with that and tell me what I need to do ?
-
Any Input on Blade Shapes for a Fixed Blade Project?
I like the Bowie look with some slight modifications. I'd love to have a good quality knife but don't want to spend too much. Can I make a high quality knife without spending too much ? Can someone post some links with a starting point of articles I should read ?
-
troy alpha 15"
Sounds great.
-
Odin Works 6.5 Grendel Barrels with BCG are in stock
The good news is that with the Grendel there is much less gain from adding the length from 16" to 20" your velocity will be close, accuracy will be excellent, and if you hunt the rifle will be much easier to manage and carry. There is a guy on the Grendel forum that regularly shoots his 16" beyond 1200 yards.
-
ar15 hexmags
I like the new profile pic DD, for a second I was surprised to see that and then I read the words.
-
New member from Bordentown
Howdy ! I think I've seen your name before. it's good to have you around, there are lots of knowledgable folks here.
-
Storm
http://www.motorsnorkel.com The discount also applies to the Yamaha generators with the device installed. They can also be used for any small engine, not just generators. The discount is good until midnight tonight. The code is FLASH0816
-
Odin Works 6.5 Grendel Barrels with BCG are in stock
Nice. Those shoot great and it's an excellent caliber.
-
Best stock AR under $1,000
I do think they mention having a log book for every weapon. I don't know if anyone has time to read it though. I do think I heard him say that by now it's not worth having a customer come to them with a broken weapon, so as a preventative measure they have a schedule on changing out parts that are likely to go.
-
Storm
Well if anyone is interested motor snorkel is having a 25% off sale on their tri fuel adapters. They are $140 now.
-
Scored some new stuff today
Nice ! :drool:
-
Best stock AR under $1,000
Well if you like battlefield, they say that the premium PSA is GTG. Also I will only get 9310 bolts even though mil spec is carpenter 158.