MauserCollector

I agree. Especially when I'm testing an Iver Johnson .380 Pony to see what ammo actually feeds. After buying every box of .380ACP SG Ammo had in stock, I found only the Blazer Brass fed 5 consecutive rounds. So problem solved. Every round was on target, which was only 20 total rounds, but a phone call came in. So I fired 8 rounds of .32ACP out of 1907 Savage at 15 yds and left. These pistols were designed for 10yds or less. Sent from my XT1585 using Tapatalk

Stupid swype typo. Thx Sent from my XT1585 using Tapatalk

Everyone is an expert. Let them make their own decisions. We have been using copper for over 100 years, but what do we know. Sent from my XT1585 using Tapatalk

27. 50 caliber handgun and rifles under .45 calibers only. Muzzle loaders are not permitted. When did the rule change to up to but not including .338? They haven't changed it on the site. Though they did make other changes During normal business hours RSOs will assist with clearing range of spent casings. a. If members would like to retrieve their own brass, please notify the RSO prior to doing so. 16. After hours, all members are required to retrieve their own spent casings and dispose of them in the appropriate containers. 17. Drawing from holsters, shooting from multiple positions and rapid fire will require an endorsement from an approved R.O.C. Training instructor. a. Rapid fire will be determined by an RSO on duty or UHGC management IMPROTANT NOTE - This will only be allowed during normal business hours. 18. Shooting at any targets other than paper is not permitted, unless supplied by Union Hill Gun Club. 19. Shooting at targets in lanes other than your own is not permitted 20. Shotguns will only be permitted in the middle shooting stalls 21. Any damage to equipment due to abuse is the shooters responsibility. Now you can get your brass over the line? Rocco was very clear once it goes over the line too bad. If I'm reading that correct that is a good change. Sent from my XT1585 using Tapatalk

There are a lot of variations. I would say narrow it down to timeframe you are looking for first. Then military or commercial. Sent from my XT1585 using Tapatalk

Not to hijack the thread, but something else homeowners on here may not be aware of. No longer can towns force you to tear something out that was done without permits. Manalapan and Old Bridge amongst other towns at one time was making even new owners remove finished basements done by the previous owner without permits. This usually came up during CO Inspection when the owner was selling the house. The DCA ruled this practice is not allowed. They can make you take permits and fine you up to $2,000 and 3 years of back taxes (if you did the work without permits), but they can't even make you open walls. They can only inspect for inherently dangerous readily visible. Sent from my iPad using Tapatalk

ATF still troll shows looking for violations and posing as buyers. I've heard about the entrapment by agents posing as sellers, but never seen it first hand. Sent from my iPad using Tapatalk

Because most new firearms buyers today want tacti-cool and are worried about ounces, because they aren't man enough to carry steel and wood. Sent from my iPad using Tapatalk

You would think so but somehow it isn't. Sent from my iPad using Tapatalk

Thanks for the report. I will post mine tomorrow since my local PD only allows firearms permits 2-3 days a month 4 hrs each day Sent from my XT1585 using Tapatalk

I figured you were referring to Dylan Roof and Texas Church Shooter Sent from my XT1585 using Tapatalk

In NJ unlikely. Other states it has happened but I'd rather a few get through than more restrictions on the many. Goes back to the whole if you put security before liberty you deserve neither thing. Sent from my XT1585 using Tapatalk

It's funny you bring up the references. I didn't think about that one but I should have. I have a friend who grew up with firearms and hunting but never got his FPID. He applied when he was 21 and one of his references never sent in the letter you had to write at that time. Then he moved and 12 years later or 5 years ago he applied again. This time a reference sent in he doesn't believe he should own a gun because he doesn't think anyone should. How he didn't know the guy was an Anti I do not know. Now he is gun shy about applying. I had a reference who I used before not send his in on my last permits which held them up. This time I used the same reference I always do and my FFL. Hopefully Mrs Remixer gets the mail otherwise I may never get my permits lol. So you have out of state and FFL as option. You should be fine. Just apply already. Another reason my friend hasn't is he is a giant procrastinator.

I could see that. Hopefully everyone here is smart enough not to do or say anything that would run afoul of the law. Even though the laws are Unconstitutional we need the courts to officially overturn them Sent from my XT1585 using Tapatalk

I don't think he is a plant and no one here can get in trouble for stating what the law and reality is. Unless ones rights were taken through due process via a court hearing I do feel for them. If not for the fact that I diligently fought all the false allegations and false arrests against myself I could be in the same situation. Unfortunately young and dumb usually goes along with broke for most people and they take the cheapest way out if offered to them.

You need Florida and Utah if you plan on traveling. Sent from my iPad using Tapatalk UHGC in Monroe Twp Middlesex County 30 lanes. Sent from my iPad using Tapatalk

No that is not the code followed in NJ. NJ used IRC NJ Ediiton. Go to home depot they have a program that will draw the plan for free. Don't buy lumber or anything else for that matter from Home Depot but let them think you will be. Submit the drawing the computer pops out. Sent from my iPad using Tapatalk

I'm starting to guess OP has something in his background that is making him afraid to apply for a FPID out of fear of denial. So OP is looking for loopholes. I have a friend in the same situation. Years ago dumbass got 2 DWI, one of which involved an argument with a girl he was dating. She punched him multiple times in front of the cop. He didn't hit her back, but did spit on her. Charge of assault was added to his DWI for spitting. I told him to press counter charges and not plead out. He took a plea which was $250 fine and charges dropped to disorderly person, but domestic still on record. Rather than go for expoungement he looked for loopholes. Upon not finding any he is trying for expoungement. Does that about sum it up OP? If so spend the money on the expoungement. If it is something more recent you need to wait to get it expunged. If it is something more severe you are screwed and can only illegally own a firearm. In which case Juan and Tyrone on the corner, or someone with a nickname like Killer is your only option. Do not try and buy a firearm from a law abiding citizen. They will not sell it to you.

Yet they are allowing .338 Lapua? Sent from my iPad using Tapatalk

The loophole is finding a private seller who is willing to break the law, which means the buyer is also willing to break the law. Which they shouldn't call a gunshow loophole because you will not find a seller in say PA who is willing to sell to you without at least seeing your PA driver's license. Also PA doesn't allow Person to Person handgun sales. SC does but again you won't find someone at a gunshow there willing to break the law. The ATF has been known to pose as buyers who are looking to break the law. So in conclusion any loophole is a buyer and seller willing to break the law. Also if you find a seller dumb enough to break the law if you get caught as the buyer expect charges from Feds, NJ, and whichever state you traveled to.

I can do that. Instead of can't bring guests between 10pm and 9am. It's actually can't bring guests between 9pm and 10am or can bring guests between 10am and 9pm as you stated. Another item the range should probably take a look at is rifle caliber under. 45 is allowed. I specifically asked Rocco and he said .338 Lapua was fine because it is smaller than .45. Not sure if he knew what. 338 Lapua was. I also asked if. 30-06 was ok and I was told yes. I don't think backstop and plates currently installed could handle either.

Maybe they changed it. I guess it makes sense if you are trying to get new members to join. A member brings 20 guests that is 20 possible new members vs only 5. Though I think at 1200 they are near capacity. I will have to ask again. So to conclude we are positive that guests can't be brought between 10pm and 9am, and a specific guest can only come 5x before having to become a member themselves. Sent from my iPad using Tapatalk

You want Azek for the box. Sent from my XT1585 using Tapatalk

I don't know how Azek deck and rail prices but vinyl rail is cheaper than Trex Rail. The footings play a factor into cost. I know my deck was $20k vs $10k 10 years ago and Trex prices went way up since then. My deck is larger, but that was my cost. Come to think of it labor should be the price of materials without footings. While $7k sounds cheap for the materials if correct deck should be $15k. Does the $7k include the decking clips? Sent from my XT1585 using Tapatalk

I'm curious has anyone ever been convicted or even arrested for possession of a loaded magazine; that didn't contain hollow points? If so what were they charged with? Sent from my XT1585 using Tapatalk