Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Lambo2936

Members
  • Joined

  • Last visited

Everything posted by Lambo2936

  1. One more.. small... step for NJ gun owners, i guess..LOL.. would be nice to see this state-wide.
  2. Yep, i said that earlier in the thread. From when i started contemplating it until i actually applied was like a solid 2 years.. and as previously stated, i only did so because a buddy of mine got his and sort of walked me through it. Hell, i didn't even know AR's were Legal in NJ until i really looked into it. Lol
  3. See his other post in the introductions sub-forum. Guy just doesn't know, i doubt its Murphy in disguise tryna take our guuuns!! MURIKAH!
  4. Probably means as far as general 2A laws go.. As stated in his other post, he is uneducated on the matter and is looking to learn and get his FID. Most of us younger guys getting into the sport are extremely intimidated by it because of the shit we hear as far as the system goes in NJ. I remember hearing crap about how ammo has to be locked in a safe separate from the firearms and all sorts of fun stuff.. don't even remember from where, but the misinformation and what not is amazing if you don't have someone pointing you in the right direction. NJ's laws do a great job of that.. I wanted to do it for like 2 years before i pulled the trigger (hehe) and applied for my FID/P2P's, and that's only because a good friend of mine did it so i figured hey, why not. Its extremely hard when you don't know someone personally in NJ who knows the ins and outs and what not. I bet if my friend didn't get his FID i'd have never gotten mine. Outreach to younger folks is severely lacking in NJ. Nowadays firearms are demonized left and right and we aren't exposed to it like we once were through school shooting programs, etc.. Only times i held a gun before getting my own was my Uncles when i was a kid in Israel, and my friends when he was showing me the basics before my FID finally came through.. He likely thought he could get around the FID/permitting processes and what not in NJ by purchasing out of state. I Shot him a PM earlier to hopefully point him in the right direction. If he isnt too far maybe i'll meet up with em' in person and assist with filling out the paperwork and what not.. No need to overthink things here folks.
  5. As per his other post, he's completely unfamiliar with the whole process here in NJ. Probably just had an AHA moment and thought he could get around the whole PITA NJ process. Unfortunately, it's not that simple. Gotta hurry up and wait before we could have real fun LOL
  6. Some interesting characters on these forums.... lmao That said, is Gettysburg a nice historical place to visit? Thought about going there as a day trip when it gets nice out; never been, and i love historical battlefields and such.
  7. Yes, correct. I was a bit vague with my response, and only mentioned long guns. Pistols MUST be transferred in NJ, and the transfer fee added on to cheaper PA prices makes handguns the same price so no point in that. You could always buy online and pay for a transfer at a local FFL, generally around 40-50$ out the door. Regardless, you need NJ paperwork first.
  8. No, other states are required to follow NJ Firearm laws(because you are a resident here). PA will still require your NJ paperwork and send that information to NJ state when necessary. They will still do the NICS (or, in PA, PICS) check and all that fun stuff. NJ isnt THAT difficult, people just seem to think it is and therefore people seem to be afraid to get into the sport. I was the same way, once you learn what is and isn't Kosher its somewhat easy to navigate around all of the BS Legislature. Long story short, you COULD buy a Rifle in another state, but it won't be any easier, plus, those dealers may not have NJ-legal firearms. I'd hope they'd know better but if they sold you an AR15 with, say, a 30rd magazine or with a muzzle device (Flash hider, brake, etc) that is illegal (Flash hiders in general are a no-go), or not pinned, that can be an issue.
  9. PM Sent. Might be able to show him the basics before he gets too involved and ends up hating it or somethin'.
  10. Oh, no way i didn't know that. Makes sense i guess o_0. Now, to buy a big buy gun.
  11. I don't think they have a separate range for .50 cal, do they? Just Handgun side or Rifle side, i thought. .50Cal sounds like fun but i live an hour away from the range and don't want to have to drive that long with soiled pants.
  12. I almost 'Liked' this... Definitely true, i didn't even think about that. SMH this state sucks...
  13. Only downside to Sharkbite is the absolutely insane pricing they come up with. Over 5$ for a 1/2" Cap lol. We have a bucket full of fittings we use for temp repairs and stuff that we keep reusing; too expensive to EVER throw a fitting away. I have boxes full of fittings in my warehouse, as well. Ya never know.. Make sure you use it on CLEAN PIPE though. Make sure there is no dirt, paint, dust, etc... in order for it to seal properly, the surface inside and out must be squeaky clean. It'll hold on dirt but is that much more likely to leak, and given that im a negative person i just can't have that.. I wouldn't trust a sharkbite on a pipe full of paint drips and crap. Also as previously stated, if there is any bend or curve in the material, it could cause it to not seal properly and cause a leak. Try to only use sharkbite fittings on straight parts of the pipe. That said, they are marketed as temporary use but they seem to last darn near forever. Installed one in the basement of my fathers property in Newark about 7 years ago.. Moisture, roaches, old crappy building, great place for something like that to fail, but no issues yet.. One of those 3/4" Braided steel lines with sharkbite fittings on both ends. It does what it was made to do very, very well. Given the alternative (sweating old, nasty copper lines in dangerously tight areas), it's worth every penny.
  14. My buddy who i work for here and there is a GC. He swears by sharkbite fittings. I'm a bit more skeptical personally, but he'll use it behind a wall and then spackle the hole shut. I don't think its an issue my self; i say go for the sharkbite valves. Just make sure you put em on nice and tight.
  15. Ill try and get in contact with them the next time they are open. Not an issue though to get a few tables. If you go mid day on a weekend there are usually tables clearing up, as all of the people that got there early start leaving.
  16. I think itd be great if we could get R14 on board... reserve an entire section of the range at opening time. Maybe BBq after or something. Would love to meet some of the guys on here, try out other peoples stuff etc. Us young millenials dont get much social interaction lmao... plus for people like me who are fairly new to shooting its nice to learn from others without a 300$ course. Pick up new tricks and such. My hours are flexible so im in 100%.
  17. We need to set up an event for standard target shooting.. Rifles and hand guns.... Maybe at Range 14. Enough of us are members and can each let in 3 other people... Would be cool to get to try out other peoples stuff, etc... I just bought a bunch of new steel targets and some black pipe to build a 6' hanging system to hang a bunch of targets off of so we could all plink on that, too.
  18. I Hope the Dem's aren't using this Thread to compile a list of crap to ban by name I Think this is a no brainer, given that we can change the barrels/uppers as we please; Certainly an AR15 of some sort with various uppers. As far as hand guns go, I really like my P226 Legion, but would even consider a modified/customized G19.
  19. I speak hebrew fluently; no issue haha.
  20. Thanks for the heads up but no, this is just a plinker. Haven't purchased a firearm in a few months (A record, actually, i think) so i figured id finally order the brake and sights for my Glock... lol.. every time i got serious about purchasing something id find a good deal on a firearm and drop far more $$ than i'd like.
  21. Reviving this.. So what's the general consensus on brakes? Seems like even the ruger hybrid brake is fairly expensive. Budget of 100$ or less. Barrel rise seems to be an issue for me so ports facing up would be a plus, i think.
  22. Im not sure where would allow that. Im a member of R14 but i doubt they would let it fly? We're 3 people. Me my uncle and my 16YO cousin. Im sure i could find others who are interested or im sure others on here would be. Would gladly pay for a course, never taken one and my skills are lacking severely. I simply have two little kids with a single income and it hasnt really been a priority, but id certainly consider one if my uncle was already going. He was in some sort of elite idf unit back in the day so id love to hit the range with him sometime, regardless.. Funny because i could never imagine most of my now-overweight family in uniform... little cousin is an officer, have some tank commanders and crap in the family.. father was one of a hand full who worked on the original F16s when they first came to their Air Force (skyhawks until then).
  23. Hey fellas, my uncle served in the IDF and wants us (and his 16 year old son; his other kids are 13 and 10 and likely too young) to attend an IDF based training course. We found Cherev Gidon in PA @ 295/person for a 6 hr course (including the 1hr lunch break) but was wondering if there was anything better? Dont mind driving 2hrs to attend, thats no big deal. The 300$ isnt really an issue either, just wondering how they are as far as quality and what not. That is for a basic rifle course BTW which includes ammo. Didnt read them but their facebook page came up on google with like 3.5 or 3.7 stars so figured id ask around.
  24. Yeah that doesn't sound right.. I've got a few buddies that have found jobs via placement companies, but never heard of a co. having to pay to INTERVIEW.. You pay if you hire, exactly like peel said... My buddy was making like 13/hr and the company was charging like 16/hr.. This was after sandy, he did a lot of clean up work.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.