Lambo2936

pics??? and an invite?? (or just pics?)

New house is done?? Woodbridge is within 30 days. I had heard the same about East Brunswick but a COA just took me 2 months.

Not sure where you are located but i have a bunch of brass i could sell you; pick through it and pull out the good stuff and just scrap the rest. I had at least 1 bucket full.

The line AFTER the meter, yes, not from the curb TO the meter, i dont think. After the meter id imagine its a necessity. I did mean the entire stove top BTW. My mom has one of those crazy power burner stove tops that seem extremely inefficient because low is like what the high on the old one was; id bet that thing is well over 60k. I like my portable gennies. Only thing id like is a bi/tri fuel setup. Propane doesnt go bad, gasoline does.

I mean i guess it couldn't hurt, but my 8KW gasoline generator ran all day long after sandy on a single tank. Not about to do the maths but the NG equivalent would probably be like running your stove top.. lol

Really? Unless you're running every other gas appliance, a 7kw generator really shouldn't draw enough to require anything crazy.. One of those 15kw or 30kw standby units is another story..

I know a guy who is pretty cheap, at least when i was looking. Ill get u his info in a sec.

Id personally probably open it up a bit with a small angle grinder(not the whole way down) and pour some self leveling cement or anchoring cement (brain fart, barely slept) or something of the sort in there.

Conversions can be found online but get a 1/4" tq wrench. Small enough numbers to maintain some level of accuracy. Using a 1/2" torque wrench with big ftlb intervals may not be so accurate.

Definitely jealous. Looks pretty damn sweet. Lol

You'd think last night would have been a busy night for you, with all of the drunks coming out of the bars after the fights and what not.

Yeah, it sucks that they dont offer a 14.5" Barrel in their other line, only the Stealth ones. Hopefully the weight of this rifle isn't too crazy. Odds are, at least where i'm at right now, the accuracy of the barrel isn't really THAT important as long as i was to stick with a higher end barrel. Any quality barrel is going to be more accurate than i am, unfortunately, lol. Having the correct tools is awesome, too. Glad i dropped the coin and purchased whatever i needed rather than trying to make do.

LOL Ok i'll take your word for it. The kit is growing on me. The bit i did start putting together is looking pretty darn badass, all things considered. Also, assembling these things is far more entertaining than i thought.

So i started assembling things with the help of some googlin'... The 14.5" barrel thats included seems a bit heavy to me. Im contemplating selling it and purchasing a lightweight barrel. Does that sound stupid? I feel like if im doing a 14.5" build i should go all out, no? Its significantly thicker than the barrel on my daniel defense ddm4v5lw. I love the weight of my DD and dont want a shorter barreled firearm that weighs even more than it does! Let me know what you guys think. Maybe im being stupid. If anyones interested, let me know.

Yeah ill live with it, not a big deal, just didnt expect that; youd think theyd spend the extra little bit to sand those areas or whatever it might take. What really annoyed me was the color difference. Its fairly blatant lol. At least the upper will match my lower so ill live with it. Think ill keep the stock & just pin it. Its a nice stock, im hoping the extra weight will help balance the rifle given the weight of the warden and pretty darn heavy barrel. Guess im just spoiled with my DDM4V5LW lol. Gotta find time to do some learnin so i can assemble the upper and lower.

Yeah tell me about it. Kinda disappointed. Im looking at replacing their entire poly kit as well to cut down on weight; the stock they include is beautiful but far too heavy given we cant use the adjustability. Going to probably just put a cheapo magpul fixed stock on there along with a magpul grip. Will add pix in a sec. Edit: Just found out the stock is insanely heavy because on top of its bulky size, its also got a cleaning rod kit inside of it? Who'd have thought lol.. now i dont know if to put on a lighter stock as it may throw off the balance. Barrel is only 14.5" but fairly heavy. Id imagine if i cut too much weight off the back the balance will be way off. Another edit: upon further review since i had a chance to open the box again, looks like those tool marks (which are both visible and can clearly be felt) are on all rounded surfaces such as the deflector, as well.. very odd. My 90$ Aero lower honestly looks better, at least as far as finish/cosmetics goes. That said it seems like the finishes match pretty well so no complaints. I can live with the tool marks or whatever the heck those are. The rail must be a different process; its far more matte than the receiver. Not sure why they wouldnt put the same finish on both but id imagine with Larue theres a reason. Here are some pix. Some components are just crazy friggin heavy.

Received and opened my box last night. Didnt have much time to look at it (maybe 30 seconds) but i must say compared to my larue scope mounts the quality/finish isnt that great. Theres what im pretty sure is machine marks on the forward assist, and the finish doesnt even close to match between the rail and upper, which is odd given both are LaRue products. Curious as to if the upper will match my lower. The stuff they include is awesome though; seems like they rushed these out the door and skimped on qc or maybe thats just how they are? Hopefully ive got more time to look at it today.

If it has an adjustable stock, it has to get pinned. If it has a muzzle devise, as the one you linked does, as well, it has to be replaced with a legal one (pic appears to include a flash hider) and pinned, as well, or, just destroy the threads/weld on a cover. The model you're allowed directly out of the box is going to come with a fixed/pinned stock and probably no threaded barrel. Pretty sure mine came like that.

Not much youll be able to do to seal the block. Definitely work on grading the whole area away from the door, as previously stated by someone else. That may well be enough. Rocks are useless; only good to prevent errosion if anything.

Lmao you guys are too much for me.. I apologize, but i simply can't lie to you like that. It's immoral.

Its not for home defense. Ended up just carrying my glock, any sort of long gun is just a hassle. Just need to get new sights for my G19 or a holster for my VP9 so i could carry that. Not really, ended up not taking it. Just an inconvenience.

Shit 20 bux? Im not THAT cheap.. ya got a business card?

Yeah, im confident that if it came to standing in front of the jury id have sufficient evidence to protect myself as far as proving that its my business or whatever goes. Fortunately, everything went well. Will probably start carrying there daily. Few shady occurances lately along with the neighbor stating that kids were trying to break in. If its within the law i dont see why not.

Yeah im aware of boundaries, etc. Just didnt remember if WHAT i could have was restricted. Gona bring my AR, then. Thanks! Just wanted to make sure it was good assuming i DID have a business there. Thanks!

Two businesses run out of there. One is legally mine, the other is legally my fathers. Is a loaded rifle allowed? W/o a chambered round, but loaded mag? Gotta go weld up a bracket for another lock and such. Plenty of witnesses, etc. Know this as well, whether locals or whatever. Dont plan on shooting anyone but not a fan of being there at night w/o it. Will be there with an open gate to work on it, so its not like i could lock myself in.