Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Rifle with 5" 9mm barrel with long barrel shroud legal in NJ?

Featured Replies

Looking to build a 9mm PCC rifle for competition.    The 2 barrels I'm considering are Odin Works Super Lite and the Taccom ULW barrels.  These are 5" 9mm barrels with long aluminum barrel shrouds to make them rifle legal 16".  The opening of the barrel shroud is the OD of the barrel, meaning you can stick your finger in it.   Would NJ consider these flash hiders since the opening is bigger than the bullet?  Does having ports vs not having ports (like the middle pic) make a difference?  

 

ODIN WORKS ROLLS OUT NEW 16" SUPER LITE 9MM BARRELS - ATTACKCOPTER

 

 

taccom-ulw-9mm-pcc-barrel-pic3.jpg

 

taccom-1016-barrel-pic1.jpg

 

 

They are both good questions for the jury at your felony trial here in the PRNJ.

Regardless of the legality, what's the point?

While I think the NJ gun laws are absolutely ridiculous…I probably wouldn’t use one of the ported barrels like those pictured, in NJ. 
 

IMHO, it just invites scrutiny that no one wants or needs. 

Odin Works describes theirs as having a muzzle brake pinned on top.  Taccom looks to be straight shroud so nothing on it...  Technically it would be legal but why would you want these?  If it's weight, you're saving 7oz vs a 16" barrel..  And if you're going with a full rifle you'd still have to do the fixed or pinned stock.  Why not just go for a 16" barrel?  Or alternately go and build a non-NFA other?

  • Author

Its for competition.  PCC class requires that it is fitted with a stock, and pistol braces are not allowed in the series so can't do an Other and need a 16" barrel.   9mm velocities out of barrels longer than 10" usually require different buffer systems.  Lighter weight out front helps with transitions.  

 

8 hours ago, Krdshrk said:

Odin Works describes theirs as having a muzzle brake pinned on top.  Taccom looks to be straight shroud so nothing on it...  Technically it would be legal but why would you want these?  If it's weight, you're saving 7oz vs a 16" barrel..  And if you're going with a full rifle you'd still have to do the fixed or pinned stock.  Why not just go for a 16" barrel?  Or alternately go and build a non-NFA other?

Short barrel lets the bullet get out of the barrel sooner which significantly reduces dwell time. This unlocks everything before the BCG slams into the back of the receiver extension which causes the first of two “bounces”’ in a traditional straight blowback AR pistol caliber carbine. The usual fix for that is a heavier spring and buffer - but that creates its own problems on the front end where the BCG then slams back into battery harder than it needs too creating a noticeable second “bounce”.

With the short barrel, the corresponding shorter dwell time will feel like it is shooting softer and smoother with no “bounce” affecting control or sight picture. If tuned correctly, the BCG and buffer will now float in the receiver extension and then slide smoothly back into battery with minimal energy.

as long as the shroud is perm attached, should be legal

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.