Noveske gen 2 lower

Colt lower parts kit

Geissele ssa

Bad-cass

Vltor a5

B5 enhanced sopmod

Noveske QD endplate

BCM mod 1 grip

 

Noveske factory 14.5" vltor mur CHF barrel with 13.5" nsr

Surefire socom brake

Axts Noveske marked charging handle

Noveske Troy sights

Arisaka keymod scout mount

Surefire m300c light

Noveske keymod QD sling mount

 

Bobro lower 1/3 mount

Aimpoint micro t1

 

 

 

This one is a combo of two not yet completed rifles

 

The lower is a aero precision

Colt lower parts kit, buffer, spring

Vltor buffer tube

Magpul fixed carbine stock

Geissele g2s trigger

Bad-ass FDE

BCM mod 1 grip

BCM QD endplate

Magpul trigger guard

 

This will eventually get a 22lr upper that's actually built. Just waiting for the muzzle brake to get pinned

 

On it currently is a Colt upper i built

Colt stripped m4 upper

Colt 14.5" socom barrel

Surefire socom brake

Colt bolt carrier

BCM bolt, firing pin, firing pin retaining pin and cam pin

Colt handguards

 

This will eventually go on a Colt 6920 lower with a b5 sopmod.

Is that a blast shield on the front

 

Sent from my DROID RAZR using Tapatalk

Yes. Surefire warden

Damn phone double posting all day. Also notice the aeroshell 33ms in the background. Should be good for about 1000 more AR builds.

 

 

Noveske gen 2 lower

Colt lower parts kit

Geissele ssa

Bad-cass

Vltor a5

B5 enhanced sopmod

Noveske QD endplate

BCM mod 1 grip

 

Noveske factory 14.5" vltor mur CHF barrel with 13.5" nsr

Surefire socom brake

Axts Noveske marked charging handle

Noveske Troy sights

Arisaka keymod scout mount

Surefire m300c light

Noveske keymod QD sling mount

 

Bobro lower 1/3 mount

Aimpoint micro t1

 

 

 

This one is a combo of two not yet completed rifles

 

The lower is a aero precision

Colt lower parts kit, buffer, spring

Vltor buffer tube

Magpul fixed carbine stock

Geissele g2s trigger

Bad-ass FDE

BCM mod 1 grip

BCM QD endplate

Magpul trigger guard

 

This will eventually get a 22lr upper that's actually built. Just waiting for the muzzle brake to get pinned

 

On it currently is a Colt upper i built

Colt stripped m4 upper

Colt 14.5" socom barrel

Surefire socom brake

Colt bolt carrier

BCM bolt, firing pin, firing pin retaining pin and cam pin

Colt handguards

 

This will eventually go on a Colt 6920 lower with a b5 sopmod.

 

How do you like that blast diffuser? 

Have t used it yet. But it sure is fun to put on and take off.

It is fun to take off and put on.

 

It works as advertised. It decreases the effectiveness of the brake slightly but it lets you shoot near others (think a team environment) safely without distracting or disorienting your partners.

 

It was developed for a specific reason: Suppressors work better and last longer when attached to a comp/brake vs a flash hider. However if you want to train/work any CQB/Team tactics without the suppressor on, the brake is dangerous. The Diffuser is a viable solution.

 

Note: Don't take it off right after shooting. Fucker gets HOT quick. Also, the finish isn't great, it scratches easy if you care about that kind of thing.

It is fun to take off and put on.

 

It works as advertised. It decreases the effectiveness of the brake slightly but it lets you shoot near others (think a team environment) safely without distracting or disorienting your partners.

 

It was developed for a specific reason: Suppressors work better and last longer when attached to a comp/brake vs a flash hider. However if you want to train/work any CQB/Team tactics without the suppressor on, the brake is dangerous. The Diffuser is a viable solution.

 

Note: Don't take it off right after shooting. Fucker gets HOT quick. Also, the finish isn't great, it scratches easy if you care about that kind of thing.

. Or if you take a class out of state, say in a place like Virginia, everyone else on the line hates you halfway through the day.

 

Funny thing about scratches, did you know in guitar collector world, people pay extra for guitars that are beat up and look like they are used and abused. The more beat up the more it costs

rustoleum makes a black high heat spray paint if you ever feel like touching it up, its rated to 1200f i believe... not bad if just to keep bare metal from showing.

Me Likey!... Well done good sir..which scope mount ya got there?

 

 

Nice.  Regarding the top-mounted Magpul QD sling mount - are you aware that Diamondhead makes one that screws into the holes on the handguard - http://www.diamondhead-usa.com/products/vrs-qd-sling-swivel-mount

 

thanks! i looked into it prior and it was always sold out.

Just gave her a fresh coat of paint!

 

 

Sent from my iPhone using Tapatalk

Very nice ! Is it cerakote or duracoat ? Did you do it yourself ?

Very nice ! Is it cerakote or duracoat ? Did you do it yourself ?

 

Cerakote, Mike over at Tier One did it for me.

.

Touring the FBI today and getting a serious chubby fondling their gear:

 

FBI?

Where were they?

 

 

Sent from my iPad using Tapatalk

Mexico?

 

Sent from my DROID RAZR using Tapatalk

 

Sent from my SM-N910T using Tapatalk

New to the AR scene and figured I would post a few shots of my new Ruger AR556.

 

-Scott

Welcome ! Looks great !

Finally did it.

 

Wow, great work in that.

Finally did it.

 

Nice paint job. Hey, what rail are you using? It looks like it bolts to the upper (for their anti rotation solution).

Looks like a Daniel Defense rail.

Looks like a Daniel Defense rail.

Correct, Its the original 10" lite rail. I have a 9" and a 12" Lite III rail going on new builds once I get the time to paint them. I couldn't decide between an M-lok or keymod rail so i went with what has always worked well, plus if DD ever releases their slim rail with m-lok i might swap that on.... DD's barrel nut works with a ton of their rails.

 

Great solid rails, they're expensive but worth the money IMO.

Looks like a Daniel Defense rail.

 

 

Correct, Its the original 10" lite rail. I have a 9" and a 12" Lite III rail going on new builds once I get the time to paint them. I couldn't decide between an M-lok or keymod rail so i went with what has always worked well, plus if DD ever releases their slim rail with m-lok i might swap that on.... DD's barrel nut works with a ton of their rails.

 

Great solid rails, they're expensive but worth the money IMO.

 

Thanks, guys.

 

Mk18 upgraded.  I pulled the RIS II off and replaced it with a CMR.  The weight difference was quite noticeable but the biggest difference was how much more comfortable the tubular design was relative to the quad rail.  The rifle without optic, can, and light came in at 6lbs.  Loaded and with accessories, it comes in at just over 8lbs. 

 

 

 

How does the cerakote look over the laser engraving on the other side of the m&p

Whoa ! the last two post with pics are sweet.