Those are some really nice builds.... I would post mine but I can't get pics on the thread.... ugh... I Tryed doing the photo bucket thing but no dice..... just not good at computer stuff..... I've had a go pro for a year and haven't been able to get that up and running.........how do you like the dynacomp. I have one on my 14.5 and the guy at the range thought I was running a 308.... has a bark but keeps the muzzle on target for quick controlled pairs.....

 

 

I like mine.  Does the job ok.  But not as effective as this:

 

If you want you can email me the pictures and I'll upload them for you.  

Whats up with all that evilness on your rifle?!?!

 

What evilness? Bayo lug, ears shaved off.  Muzzle is a brake made to look like a flash hider. Mag is midwestpx 15/30.

 

No evilness here. 

I don't post pic much, since I only have ghost guns.... But here is one.image.jpg[/url]

 

Yours looks a lot like my match rifle. Sorry there is a WASR in the picture polluting our AR thread, thats the only pic I have of my M15. Guess mine must be evil also

 

Sent using Tapatalk 2 NOW FREE!!!

 

just finished a build last night. built the lower and used a bunch of parts i had laying around to build the upper.

 

here it is next to my bushmaster

Deerslayer, about how old is your armalite?

Mine is marked on the box it came in, 1996 but as far as the information I got its from 1995. But I don't know how accurate that is.

Does yours have that eagle stamp on the front of the lower?

 

Come on you AR geeks and GURUS send me some info

What evilness? Bayo lug, ears shaved off.  Muzzle is a brake made to look like a flash hider. Mag is midwestpx 15/30.

 

No evilness here.

My apologies, good job keeping the look it was meant to have!

Those are some really nice builds.... I would post mine but I can't get pics on the thread....

Some pics for Kimber45

 

 

 

Thanks Checko........ that's awesome

Deerslayer, about how old is your armalite?

Mine is marked on the box it came in, 1996 but as far as the information I got its from 1995. But I don't know how accurate that is.

Does yours have that eagle stamp on the front of the lower?

 

Come on you AR geeks and GURUS send me some info

I bought it from someone not sure the year. When I get home from work ill pull it out of the safe and check for you.

 

Sent using Tapatalk 2 NOW FREE!!!

 

 

My M15A4NM was built in 2010 according to the guy I purchased it from. The book he gave me with the rifle was dated October 2009. Yes it has the white eagle stamp on the front of the mag well. Here's a few more photos and a link to armalite's website showing the specs on my rifle. Now that I've got a match rifle I need to find some matches to compete in.

http://www.armalite.com/ItemForm.aspx?item=15A4NM

 

Sent using Tapatalk 2 NOW FREE!!!

 

A mucho improved shot of my latest rifle.  Photo by Triple Bravo who I met at SHOT.

 

A mucho improved shot of my latest rifle.  Photo by Triple Bravo who I met at SHOT.

 

Badass!

What optic is that?

What optic is that?

 

Trijicon SRS

 

http://www.trijicon.com/na_en/products/product2.php?id=SRS&mid=1x38

A mucho improved shot of my latest rifle.  Photo by Triple Bravo who I met at SHOT.

 

 

Ty that is one sexy rifle. What are the components? Is that your upper as well as the lower?

Ty that is one sexy rifle. What are the components? Is that your upper as well as the lower?

Yep, my forged upper on my billet lower.  I had put this component list together on another forum so quick copy/paste job: 

 

Lower

Lower: Midwest PX Premium 7075 Billet Lower

LPK: Midwest PX LTG LPK

Trigger: Hiperfire 24C

Stock: Magpul UBR

Grip: Magpul MOE+

 

Upper

Upper: Midwest PX Forged Upper

BCG: Midwest PX Enhanced BCG

Barrel: 16" Centurion Arms Cold Hammer Forged Barrel

Handguard: 12" Fortis REV

Charging Handle: Rainier Arms Raptor

Sights: Front MBUS Pro, Rear MBUS Pro

 

Yep, my forged upper on my billet lower.  I had put this component list together on another forum so quick copy/paste job: 

 

Lower

Lower: Midwest PX Premium 7075 Billet Lower

LPK: Midwest PX LTG LPK

Trigger: Hiperfire 24C

Stock: Magpul UBR

Grip: Magpul MOE+

 

Upper

Upper: Midwest PX Forged Upper

BCG: Midwest PX Enhanced BCG

Barrel: 16" Centurion Arms Cold Hammer Forged Barrel

Handguard: 12" Fortis REV

Charging Handle: Rainier Arms Raptor

Sights: Front MBUS Pro, Rear MBUS Pro

 

 

Are you planning on doing a billet upper to match your new lowers?

A mucho improved shot of my latest rifle.  Photo by Triple Bravo who I met at SHOT.

 

It looks sweet, how does it shoot. 

Are you planning on doing a billet upper to match your new lowers?

 

Yes, one standard billet upper and one sidecharging upper that will be able to use any BCG with a provided, specially-milled cam pin.  We'll also have the cam pins available separately so people can have spares.  The biggest issue people have with sidecharging uppers and piston uppers is the lack of replacement parts.  I really like this design because replacement parts will be available and they'll be much cheaper than a specialized carrier.

 

It looks sweet, how does it shoot. 

 

Too cold to know.  Polar vortex has shut down all test firing so it'll have to wait for spring.

Yes, one standard billet upper and one sidecharging upper that will be able to use any BCG with a provided, specially-milled cam pin.  We'll also have the cam pins available separately so people can have spares.  The biggest issue people have with sidecharging uppers and piston uppers is the lack of replacement parts.  I really like this design because replacement parts will be available and they'll be much cheaper than a specialized carrier.

 

 

 

dust cover ?

 

and when?

dust cover ?

 

and when?

Slickside on the sidecharge so no dust cover or forward assist.  The non-reciprocating handle will pull double duty as a forward assist if needed.  Hoping to have them shipped to me in the next 2-3 weeks.  Standard billet upper should have port cover and forward assist though.

Will you be selling the complete side charged upper or just the upper.

Will you be selling the complete side charged upper or just the upper.

It'll be the upper only initially.  Even with staff, we're at capacity right now for in-house assembled products due to physical space constraints.  After we move, we'll have more hands to help out and more floorspace to work and will start rolling out more complete uppers which we'll be able to test fire on site rather than load up and head to a local range.

no chance of one with a dust cover.. im kind of weird about that.. 

Well when you have complete barreled billet uppers with a fortis free float on it, expect an order from me along with the billet lower.

no chance of one with a dust cover.. im kind of weird about that.. 

Unfortunately not.  The machine shop that is making them has the programming locked in.  They're cutting metal now and sending the first batch out to anodizing soon.  And while pricing is not set in stone yet, it's expected to be in the $225 range for the upper, non-reciprocating charging handle and cam pin.

good luck with it.. I have thought about side charging handle for a while.. but you know.. lol

Here is one of my latest build. Went for all top shelp parts and like the final look. Now I just need to decide if I will keep it or not. lol

Here is one of my latest build. Went for all top shelp parts and like the final look. Now I just need to decide if I will keep it or not. lol

How do you like the seekins lower? Do you find the mag well shape to be invasive? Or is it just like any other? I had been looking at them online for a while but have never seen one in person.

How do you like the seekins lower? Do you find the mag well shape to be invasive? Or is it just like any other? I had been looking at them online for a while but have never seen one in person.

The mag well doesn't get in my way at all. I don't use a mag well hold on the rifle so there is no change other then the look. It is tight for the pmags but they still drop free when empty. Real nice product.