Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Are handgun chassis legal in NJ?

Featured Replies

Uhhhhh....NO!

  • Author
1 hour ago, High Exposure said:

Why do you say no?

I thought they were illegal too, but I don't see where?  Again something with a pistol brace, not a stock.  

Flux raider brace version fine.  Stock version no.

1 hour ago, PK90 said:

Aren't you adding a vertical foregrip making it an AOW?

These chassis systems have "Magazine holders" that are not vertical (angled) so they're technically 

Chassis systems like the CAA MCK/Micro Roni and the Recover 20/20 have stabilizers and no VFG... 

2 hours ago, High Exposure said:

Look at the weapons code for NJ and find where a Flux setup has violations.

a semi-automatic pistol that has an ability to accept a detachable magazine and has at least 2
of the following:
1. an ammunition magazine that attaches to the pistol outside of the pistol grip;
2. a threaded barrel capable of accepting a barrel extender, flash suppressor, forward handgrip, or
silencer;
3. a shroud that is attached to, or partially or completely encircles, the barrel and that permits the
shooter to hold the firearm with the nontrigger hand without being burned;
4. manufactured weight of 50 ounces or more when the pistol is unloaded; and
5. a semi-automatic version of an automatic firearm;

Only 3 - the Barrel Shroud one applies here.  #1 - grey area... it's not feeding the gun like how the law is written.  

3 hours ago, PK90 said:

Aren't you adding a vertical foregrip making it an AOW?

The mag holders are not classified as vertical grips.

As far as AOWs go… I can’t find anything in any NJ law that says AOWs are prohibited outside regular federal regulations.

  • Author

Is the front mag holder considered a forward grip?  Is that the reason it would be considered AOW?  If you were to get a chassis with a pistol brace that did not have front mag holder would it be GTG?  

On 5/11/2024 at 2:09 PM, Krdshrk said:

Flux raider brace version fine.  Stock version no.

These chassis systems have "Magazine holders" that are not vertical (angled) so they're technically 

Chassis systems like the CAA MCK/Micro Roni and the Recover 20/20 have stabilizers and no VFG... 

a semi-automatic pistol that has an ability to accept a detachable magazine and has at least 2
of the following:
1. an ammunition magazine that attaches to the pistol outside of the pistol grip;
2. a threaded barrel capable of accepting a barrel extender, flash suppressor, forward handgrip, or
silencer;
3. a shroud that is attached to, or partially or completely encircles, the barrel and that permits the
shooter to hold the firearm with the nontrigger hand without being burned;
4. manufactured weight of 50 ounces or more when the pistol is unloaded; and
5. a semi-automatic version of an automatic firearm;

Only 3 - the Barrel Shroud one applies here.  #1 - grey area... it's not feeding the gun like how the law is written.  

So, as I interpret things, you get a hit on #1. It says nothing about feeding from said magazine, just that the magazine attaches to the pistol outside of the pistol grip. And it is attached. Was this what was considered when it was written? 100% no. However, this is NJ and I don't think they would give you an inch when as written it covers it in plain english. 

#2 would be a hard yes if you put a threaded barrel on your setup, so I'd not do that. 

#3... well it's not a shroud, but it does allow you to hold the firearm with the nontrigger hand without being burned. Shroud is ill defined, and it could be argued to partially enshroud the barrel from the bottom. I would bet cash money that the AG would gladly say that second part there is to clarify the intent of the law and that since you can do that, you violated the stated intent of the law. 

  • Author

Getting a non-threaded barrel is easy.  I'd definitely consider it as having a form of a shroud for #3.  The question is does it actually violate #1?  If so is there another chassis option that does not have mag holder VFG?  

 

3 hours ago, raz-0 said:

#3... well it's not a shroud, but it does allow you to hold the firearm with the nontrigger hand without being burned. Shroud is ill defined, and it could be argued to partially enshroud the barrel from the bottom. I would bet cash money that the AG would gladly say that second part there is to clarify the intent of the law and that since you can do that, you violated the stated intent of the law. 

Every handgun that you shoot with 2 hands allows you to hold the firearm with the non-trigger hand without being burned. that doesn’t make it have a shroud.

If I remember right, a shroud “encircles” the barrel - like the ventilated cover on the barrel on a Tec-9 or the handguards on AR pistol.

And, I dot believe the mag holder counts as you are interpreting it.

With the Glock version, you can not use that portion as the brace and mag holder are separate pieces.

10 hours ago, raz-0 said:

So, as I interpret things, you get a hit on #1. It says nothing about feeding from said magazine, just that the magazine attaches to the pistol outside of the pistol grip.

Here's the kicker though - it's attaching to the Chassis - which in itself, is an accessory, not the pistol.

However if you're really worried about that - look at the Recover 20/20 - the "mag holder" is optional.

2020-new-sling.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.