Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Cleaning Kits

Featured Replies

I picked up what I thought was a nice all around cleaning kit for my shotguns and handgun till I opened it today to do some cleaning. It does have barrel brushes as well as different size barrel cloth plungers and came with some patches as well. But it didnt come with any cleaner or lubricant!!! :evil:

 

I guess its my fault for not reading the packaging before buying it. So no Im off to Dicks again for some cleaner/lub. Any suggestions on what to use and what not to use?

 

-Scott

I picked up what I thought was a nice all around cleaning kit for my shotguns and handgun till I opened it today to do some cleaning. It does have barrel brushes as well as different size barrel cloth plungers and came with some patches as well. But it didnt come with any cleaner or lubricant!!! :evil:

 

I guess its my fault for not reading the packaging before buying it. So no Im off to Dicks again for some cleaner/lub. Any suggestions on what to use and what not to use?

 

-Scott

 

Remoil, breakfree clp are good. Some folks use Hopps #9 but you need to take car to thoroughly get it off of aluminum/nickel/chrome and for that reason, I just stick to the others.

What about Gun Scrubber?

 

I've never used that one.

  • Author

Remoil, breakfree clp are good. Some folks use Hopps #9 but you need to take car to thoroughly get it off of aluminum/nickel/chrome and for that reason, I just stick to the others.

 

Thanks! I dont want anything too perticular to work with so I will keep that in mind with the hopps#9

 

-Scott

I have walmart brake cleaner..., hoppes 9, and hoppes gun oil.

 

I found the hoppes starter kit for like $15 is great to get you going, but the brushes and rods brake apart.

 

best place for hoppes is Walmart, if yours stocks it. $3 for a nice bottle of it that dicks sells for $10.

I use Slip2000 lube - dunno how it compares to anything else, cuz it's the only thing I've tried so far.

ED'S RED !

  • Author

Wow nice veriaty of stuff everyone uses. Anyone ever try Shooters Choice? Dicks sells a 3 step kit for $19.99.

 

-Scott

I generally use rem-oil for cleaning and

 

I use Mobil 1 Full Synthetic Engine Oil for Lube. I forget the weight. I have the bottle out in the shed. ~$4 for a QUART, will last damn near a lifetime. I've been using it for over a year and have yet to go through 1 or 2 ounces, just a bit on the tip of a q-tip goes a long way.

 

My guns are MUCH MUCH smoother since I switch from Hoppes Gun Oil.

Tetra gun grease for lube devotee here. You can apply it exactly where you want it and it stays there. No need to have oil flinging around everywhere.

  • Author

I actually purchased the Shooters Choice 3 step kit from Dicks today....mainly becuase I got it for free with a coupon so I figure I would try it and if I didnt like it, well I didnt spend anything either!

 

My SR9 was very easy to clean, I guess since I dont have a ton of rounds through it yet that would make for easy cleanup. The shotguns on the other hand were more of a pain. Seemed like the patches were never gunna come out clean. I ended up spending over an hour and a half on both shot guns and ten to twenty minutes on the SR9.

 

After all was said and done all three guns came out nice and clean and the 12ga seems to be functioning a lot better so hopefully next time out I can get some shells through her.

 

Thanks for the helpful hints....

 

-Scott

I actually purchased the Shooters Choice 3 step kit from Dicks today....mainly becuase I got it for free with a coupon so I figure I would try it and if I didnt like it, well I didnt spend anything either!

 

My SR9 was very easy to clean, I guess since I dont have a ton of rounds through it yet that would make for easy cleanup. The shotguns on the other hand were more of a pain. Seemed like the patches were never gunna come out clean. I ended up spending over an hour and a half on both shot guns and ten to twenty minutes on the SR9.

 

After all was said and done all three guns came out nice and clean and the 12ga seems to be functioning a lot better so hopefully next time out I can get some shells through her.

 

Thanks for the helpful hints....

 

-Scott

 

You need tampons

http://www.theboxotruth.com/docs/edu9_2.htm

I actually purchased the Shooters Choice 3 step kit from Dicks today....mainly becuase I got it for free with a coupon so I figure I would try it and if I didnt like it, well I didnt spend anything either!

 

My SR9 was very easy to clean, I guess since I dont have a ton of rounds through it yet that would make for easy cleanup. The shotguns on the other hand were more of a pain. Seemed like the patches were never gunna come out clean. I ended up spending over an hour and a half on both shot guns and ten to twenty minutes on the SR9.

 

After all was said and done all three guns came out nice and clean and the 12ga seems to be functioning a lot better so hopefully next time out I can get some shells through her.

 

Thanks for the helpful hints....

 

-Scott

 

I tend not to worry so much about the shotguns since their is no rifling to get clogged up with lead.

I agree with Coldsolderjoint

 

I also think that the amount of crap that comes out of a shotgun shell, whats the point of going too crazy with cleaning it anyway. One shot and its a filthbag anyway

 

I try to get them as clean as possible, but in the end if theres still a little black on the pads, I eventually just call it a day

  • Author
I agree with Coldsolderjoint

 

I also think that the amount of crap that comes out of a shotgun shell, whats the point of going too crazy with cleaning it anyway. One shot and its a filthbag anyway

 

I try to get them as clean as possible, but in the end if theres still a little black on the pads, I eventually just call it a day

 

I did end up sayin screw it, they are clean enough but thanks for given me the heads up....not gunna waste so much time and cleanin supplies next time.

 

-Scott

  • 1 month later...

I used to use Gunscrubber but have switched to CRC brake cleaner, much cheaper. Matter of fact, that's what Bill Wilson of Wilson Combat used in their recent maintenance CD you get with new pistols.

  • Author

I see a few people using Brake clean...no problems with this so far? Do you use a seperate barrel cleaner or spray it down the barrel and then use the brush and the pads?

 

-Scott

I keep any brake clean type of product away from plastics.

Look into otis tactical you can clean any cal. gun with on VERY small kit. Plus they donate kits to the millitary.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.