August 20, 200917 yr Well I was bored this morning and figured I would try out a project that I have been thinking about for a while. :mrgreen: I don
August 20, 200917 yr Author It really was pretty simple. I did it in about 30mins with basic hand tools that any self respecting home owner should have. I am not a machinist or anything, I just like to tinker and figure things out.
August 20, 200917 yr Author Well i started a write up, and should have it done by tomorrow afternoon. Looks like i am going to start another bolt, so i can get pictures to go along with it. Also I have an article that i am writing on "accurizing a mosin and tuning the trigger" about halfway done. My PE sniper has a trigger pull of about 3oz and is smooth as silk and breaks like glass. This rifle shoots less than 1" groups all day long.
August 21, 200917 yr Looks good! I just got my bolt back after send it out to have a swept back bent bolt welded on to clear the scope mount i also installed. I'm looking forward to your write up on the bent bolt and the action tuning. I have some images from the russian mosin tuning manual that i got from the surplus forums and also used to get the trigger pull down to about 3lbs. Perhaps you have also seen them?
August 21, 200917 yr It really was pretty simple. I did it in about 30mins with basic hand tools that any self respecting home owner should have. I am not a machinist or anything, I just like to tinker and figure things out. I want to know how you did this without a welder since I feel that's a little above and beyond "Basic Hand Tools". Looking forward to reading your how to!
August 22, 200917 yr Author Here is the first part of my write up. I ended up being really busy and didn't get to work on it today, so here is what i have so far: Well here is my ghetto sniper bolt for a mosin. It takes about 30 mins to make and seems to function well. I just like to tinker and in no way am I a machinist or gunsmith. I have tested my bolt yesterday and seemed to work well, but use these instructions at your own risk. First off let
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.