Any glock gurus out there?

 

A friend (I swear it is isn't me 8-) ) has a relatively new Glock 19 that he tried to install an aftermarket trigger connector in. He botched something up, because now he can only depress the trigger slightly; it doesn't actually release the firing pin. While the slide still runs back and forth, he claims he now can't field strip it because the trigger isn't hooked up correctly.

 

I'm hearing all this over the phone and will run over to see it this weekend to try and diagnose what's up. I'm no expert, but I have detailed stripped and re-assembled my G26 several times correctly.

 

Any ideas on how to release the slide from the frame without an actual full trigger pull, or anything I should be looking at first?

well whatever he did activated some kind of crude safety measure to prevent this :

 

LOL!!!

Lock slide back. Pry slide cover plate down.

 

 

 

Pull out striker.

 

 

Disassemble w/o pulling trigger.

 

Get one of these before you reassemble with that modification.

 

PK, thanks !!

 

Theiqcrew, nuke it from orbit, it's the only way to be sure.