Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Good deal on AR lowers - So I am building one!

Featured Replies

I have a Spike tactical upper in 22LR, in addition to the standard 223 that came with my rifle. I was wondering how much wear I put on the detent pins and locking holes in the upper and lower by frequently swapping between my uppers. I found out that Spike's Tactical has a special and is selling their lowers for $89.95 (50% off) and Lower parts kits from DPMS for $49.95 (25% off). All I need besides that is a stock and buffer tube (the 22LR upper doesn't require a buffer or buffer spring). I can have a new complete AR for under $200. I went for it and ordered the parts yesterday. The AR lower isn't too complex, and I have a book on building ARs. I'll post on how the build goes. Here are the links:

 

Spikes Tactical Specials

http://www.spikestactical.com/z/index.p ... e=specials

Rock River Arms ButtStock Assembly

http://www.rockriverarms.com/index.cfm? ... ory_id=296

Rock River Buffer Tube, Spacer, and Buttplate screw (I chose Rock River. I know there are probably other vendors out there with better prices/quality).

http://www.rockriverarms.com/index.cfm? ... ory_id=287

if you need to barrow a barrel wrench let me know I'll mail it down to you

  • Author

Thanks Ted. I should be OK. I have an assembled upper already. I just need to put together a lower.

lunker, i have the AR combo wrench now if you need to borrow it. Its useful when torquing the buffer tube if you don't have a crows foot wrench handy. i remember your other post some time back asking for one but it was too late or something.

  • Author
lunker, i have the AR combo wrench now if you need to borrow it. Its useful when torquing the buffer tube if you don't have a crows foot wrench handy. i remember your other post some time back asking for one but it was too late or something.

 

Thanks Jon. That's awesone. I will need it some time next week after the parts arive.

Its amazing how easily the parts go together. If you are good with Lego , putting a AR lower together will be a snap....

Its amazing how easily the parts go together. If you are good with Lego , putting a AR lower together will be a snap....

 

 

So true Big boy Lego's

  • Author

Lesson 1 learned in AR Lower build:

 

Right now my frustration is coming from roll pins. I spoke the the guy at Spike Tactical and he told me that the anodizing process sometimes tightens the roll pin feed holes. I was using vice grips and a hammer to get the damn thing through the trigger guard ears and bolt release hinge.

Spike's will be sending me new roll pins (since my ham-handed technique has made my pins out-of-round). My new tactic will be to use drill bits to slightly expand these holes so the roll pins can squeeze in there. I will go easy so the pins don't fall out or get loose.

 

Anticipating Lesson 2 to follow in short order :)

  • Author

So....

 

I was able to use a small drill bit to expand the trigger guard roll pin hole. After that, the roll pin went in much easier. The tougher problem was the roll pin hole for the bolt stop. Because the holes run latitudianally across the gun, I didn't have a long enough drill bit to use the same procedure.

I went on to eBay and bought a combined brass/steel 8 piece punch kit for 10 bucks.

 

http://cgi.ebay.com/8-Pc-Gunsmith-Steel ... 53dde179b2

 

Using a brass punch and the vice in the back room of Shore Shot, Andy (great guy who works there) helped me get that pin through.

 

After that, everything went smoothly. Building an AR lower is about the same level of difficulty as an erector set.

I am looking forward to doing again when we do the NJGF group buy!

Lunker I had the same issue with the bolt stop and the trigger guard roll pins on the same receiver.

Diamond files are your pest friend for issues like this. You can get them cheap at Harbor freight and they come in

all sizes and shapes. Just have to be careful not to open it up to much after every 5 or 10 passes see if you can seat the

pin if it will barley seat then give it a few more and you should be good. A drill bit will work but you do not want to open it

up past spec or there may be issues.

 

On a side note Lance & Andy at shore shot are very good with AR builds, both are very knowledgeable.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.