Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How do you guys justify the high cost of guns?

Featured Replies

In my mind the real weakness is manufacturers trying to make it cheaply :( It was designed at a time when grumpy old men with a lot of skill sat around all day machining them and making them by hand. It was never designed to be made inexpensively. (compared to squirt and jerk guns of today). Of course there is economy in mass production but for a reference, just the parts on my current build was around $1200. That does not include the $ factor for the about 200 hours I will have put into it when its done. I guess the other issue is EVERYONE makes a 1911 from good to bad :(

 

Plus the fact that once you get it working, there is a chance something will eventually break or wear out and need replacing. And most replacement parts may require some hand-fitting.

 

I'm probably never going to buy another 1911 EVER. The cost is just too high, and I'd rather by a matching set of Colt Pythons.

 

I've had my Delta Elite for more than 22 years, and the only thing that has ever been replaced were recoil springs and magazines, while I dont shoot it every day, i do shoot it regularly and i;ve NEVER had a problem with it. My Defender was bought from a co-worker about 13-14 years ago, that gets shot a LOT since i have to qual with it, and I carry it every day, and again..NEVER had a problem with it. I guess i'm just lucky, but my damn little Mustang even runs well.

 

The fact you had it for 22 years is testament to it's durability and craftsmanship. Modern, mass produced 1911s are a crapshoot. Even SAs will require some smithing to work right.... but luckily, they have a good warranty.

 

If you want something real good, you're going to pay out the nose to get it. $1000 to start.

 

Colt Pythons usually start around that, and I want them for my reasons.

  • Replies 72
  • Views 3.4k
  • Created
  • Last Reply

Top Posters In This Topic

To whom?

I'd rather by a matching set of Colt Pythons.

 

I think you are not looking in the right direction if you want Colt Pythons instead of a 1911. The Python is a thing of beauty (especially in Royal Blue), but those guns suffered from a lot of the same problems as S&W K frames. It was easy to shoot them out of time with a diet of magnum loads. I like to feed my 357 hot loads. I would be afraid to do that if I owned a Python. Add to that the fact that there is an ever decreasing number of smiths who are competent enough to work on them. That is the one advantage to the S&W action. Every gunsmith worth his salt can work on it. The other is that the L frame, and particularly the N frame, can handle just about ANYTHING you want to dish out.

 

My dad has two Model 29s (6" and 4")... and that's about as interesting a gun they make. Everything else is "meh".

 

Now a Python... that's a work of art, bound only to increase in value, just like an M1 Garand. They just don't make em like they used to.

 

Also, S&Ws have their own issues, especially modern ones. I don't like the Hillary lock, and I've seen just as many fail and break than I've heard of Pythons going out of time. At least the timing issue is a quick fix, a broken gun is an expensive loss.

 

But I digress... my Pythons would be more for historical value. I'd shoot them, but not work them to death. (Plus, .38spc can be used instead of super hot magnum loads).

DA, have you owned a Python? I have, I sold it. Never looked back. It was a unique revolver for sure. Has an interesting lockup mechanism. But I hated the trigger and the way the unusual V spring system of the Colt made the trigger feel like it was stacking. Good collector piece, bad shooter IMO. If you do ever get one, understand that Pythons are NOT a highly durable revolver.

 

 

Edited to clarify that when I say bad shooter, I dont mean it shoots badly, I mean I dont like to shoot it because of durability and depreciation concerns.

DA, have you owned a Python? I have, I sold it. Never looked back. It was a unique revolver for sure. Has an interesting lockup mechanism. But I hated the trigger and the way the unusual V spring system of the Colt made the trigger feel like it was stacking. Good collector piece, bad shooter IMO. If you do ever get one, understand that Pythons are NOT a highly durable revolver.

 

I have one now, an interesting one, but I'm looking for 2 regular ones for the aforementioned reasons.

 

I like them, and I like the stacking trigger, but I don't think they're any less durable than most revolvers. Like I said: even modern ones break, or come with stupid ass trigger locks. They're mass produced, no QC, crap. Older smiths are good, and my family has two Model 29s, but I've always loved the look and design of the Python.

I agree with Nanny locks. I also agree with the look of the Python. Its the best looking revolver IMO.

I agree with Nanny locks. I also agree with the look of the Python. Its the best looking revolver IMO.

 

Plus, unlike most Smiths, it will always go up in value. They're a good investment, and I'd like to pass them on to future generations of my Family.

Plus, unlike most Smiths, it will always go up in value.

 

I agree with you about the collector value of a Python. I think the current crop of S&W revolvers (exempting pro and performance center models) is nothing special, and that they will not appreciate much in value.

On the other hand, have you been looking at the prices on N and K frame S&Ws from the 70's and earlier lately? The only saving grace for my wallet is that S&W made soooo many of some models, that they are still affordable. That won't last forever though.

The only saving grace for my wallet is that S&W made soooo many of some models, that they are still affordable.

I wish that was true with the 547's. Can't seem to find one for less than $1k!

The only saving grace for my wallet is that S&W made soooo many of some models, that they are still affordable.

I wish that was true with the 547's. Can't seem to find one for less than $1k!

 

For the 547, Check this auction out. By sale time it will probably be up around $900 though.

http://www.gunbroker.com/Auction/ViewIt ... =181737772

Or this

http://www.gunbroker.com/Auction/ViewIt ... =181263405

 

 

If you would settle for a Ruger, they can be had for a few hundred less.

http://www.gunbroker.com/Auction/ViewIt ... =180216184

http://www.gunbroker.com/Auction/ViewIt ... =181120385

http://www.gunbroker.com/Auction/ViewIt ... =180179645

 

Single action revolvers are fun as hell.

haha yeah, I've been watching those auctions. The one that's still around 500 got 5 bids in less than 24 hours, so I'm not optimistic :) I'm eventually just going to have to suck it up and dish out the money... I'm just not quite there yet

 

Thanks for the Ruger tip tho... I keep forgetting they made some in 9mm. Will have to look into that a bit more.

Anyone remember the S&W with the non fluted cylinder? 627 IIRC. That was a nice piece!

  • 11 years later...
On 7/28/2010 at 10:04 AM, Shane45 said:

DA, have you owned a Python? I have, I sold it. Never looked back. It was a unique revolver for sure. Has an interesting lockup mechanism. But I hated the trigger and the way the unusual V spring system of the Colt made the trigger feel like it was stacking. Good collector piece, bad shooter IMO. If you do ever get one, understand that Pythons are NOT a highly durable revolver.

 

 

Edited to clarify that when I say bad shooter, I dont mean it shoots badly, I mean I dont like to shoot it because of durability and depreciation concerns.

A Ruger Six Series, and in particular a Speed Six is a durable thing of beauty.  In particular, I like the 9mm version and the Postal Inspector variety, but the run of the mill shooter rocks.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.