Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

T/C Encore Pistols

Featured Replies

Anybody ever see one of these things? I have a couple PP's on the way this thing looks pretty sweet. Yeah, in NJ its useless for anything except plinking, but dang... totalllly sweeet! Lol... get a 7.62x54R barrel made up for it!! HAHAH Imagine goin to ft dix and shooting steel at 200 yards with a friggin PISTOL?

If you got a pistol lengthed barrel for the encore in 7.62x54r, the entire firearm community would HATE you because the import of pistol ammo with steel cores (AP cop killer bullets :roll: ) is illegal. So once a pistol is made in 7.62x54r the import of surplus will be stopped. Now, im sure a one-off barrel wouldnt do that but be carefull.

 

But yes, ive seen one with a 6" .357 mag barrel. Also an attachable stock and a 16" .45-70 barrel. But you have to attach the barrel before the stock otherwise its an SBR :facepalm:

  • Author

Hold on... they make models specifically called "Encore Pistol". Its should not be considered a SBR because it never was or is a rifle, even if it shoots ammo typically fired from a rifle. Its not a shoulder fired weapon and has no buttstock.

Hold on... they make models specifically called "Encore Pistol". Its should not be considered a SBR because it never was or is a rifle, even if it shoots ammo typically fired from a rifle. Its not a shoulder fired weapon.

 

 

I know. But they make some rifle length barrels and attachable stocks for some. If you attach a stock before putting the (at least) 16" barrel on, then it turns into an SBR because it has a stock and 6" barrel

Right. So if you have a 6" .357 barrel on the pistol, and you attach a shoulder stock, it is an SBR.

 

If you attach a 16" barrel, and THEN the shoulder stock, it is legal.

Imagine.....shooting steel at 200 yards with a friggin PISTOL?

 

That's been going on since the early 70's. It's called Handgun Metalic Silhouette and IHMSA is the governing body. First shoot in the East was in 1975 in MA of all places. Ram targets are set at 200 yds or M depending on the shooting range.

 

The Encore is a beefed-up version of the Contender - although the Contender has been barrelled for some insane calibers. I used to shoot metallic silhouette with a .30 Herrett in a Contender - that's a wildcat made from .30-30 brass, shortened with a shorter neck and the shoulder angle made sharper. I also had a Remingtom XP100 in .308 Winchester. Both of those are gone, but I do still have the Contender with a .357 Max barrel - worst recoiling handgun I've ever shot (and that includes the two forementioned). Contenders / Encores are great, just for their versatility - you can go from elephants to squirrels and use the same gun.

 

Adios,

 

Pizza Bob

  • Author

That's certainly a gray area. So as long as you keep it a pistol without a buttstock you should be able to shoot anything. Based on that same ATF document, you cannot shoot steel core ammo from a pistol. So 7.62x54R would be out.

 

(B) The term "armor piercing

ammunition" means

  • Author
Contenders / Encores are great, just for their versatility - you can go from elephants to squirrels and use the same gun.

 

Thats what I was thinking... would be sweet to get a .30-06 and .204 Ruger barrel....

That's certainly a gray area. So as long as you keep it a pistol without a buttstock you should be able to shoot anything. Based on that same ATF document, you cannot shoot steel core ammo from a pistol. So 7.62x54R would be out.

 

(B) The term "armor piercing

ammunition" means

And: 7.62x54r wouldnt be "out" as far as a pistol barrel goes. You just cant shoot surplus out of it. Plus the whole problem of banning surplus ammo for everyone in the country :o

...would be sweet to get a .30-06 and .204 Ruger barrel....

 

The problem with rifle calibers in pistol length barrels is that, unless you develop a load specifically for the short barrel, all you're doing is blowing a bunch of unburned powder out the muzzle. That plus the loss of velocity due to the barrel length, makes finding a bullet that will perform properly on game at the much lower obtainable velocities becomes a problem.

 

My .357 Max is a pistol cartridge - a rather brutal one, but is good for deer or black bear if I chose to hunt. The only reason I got it was for Met Sil and the fact that it could be loaded with carbide dies.

 

As for a varmint cartridge, and that seemed to be the gist of your desire, I have a scoped (Burris 7x AO IER) .221 Fireball barrel. Great for groundhogs and now that the .17 Fireball has become a factory round (not sure if that's what they call it), you have another great choice.

 

While it's neat to imagine these hand cannons, in practical use, you have to scale your dreams back a bit. JMHO/YMMV.

 

Adios,

 

Pizza Bob

Contenders / Encores are great, just for their versatility - you can go from elephants to squirrels and use the same gun.

 

Thats what I was thinking... would be sweet to get a .30-06 and .204 Ruger barrel....

 

I was looking at that gun in 204Ruger. Even if it lost 300fps from a short barrel, it would still be going 4000fps. :)

I think so, as long as you keep withen jerseys weight limits and such. I dont think theres any length limit on a pistol.

  • Author

Doesn't that only applies to semi-auto pistols ??

 

http://www.njsp.org/info/pdf/firearms/0 ... 13ch54.pdf

 

ii. A semi-automatic pistol that has an ability to accept a detachable magazine and has at

least two of the following:

(1) An ammunition magazine that attaches to the pistol outside of the pistol grip;

(2) A threaded barrel capable of accepting a barrel extender, flash suppressor,

forward handgrip, or silencer;

(3) A shroud that is attached to, or partially or completely encircles the barrel and

that permits the shooter to hold the firearm with the non-trigger hand without being

burned;

(4) Manufactured weight of 50 ounces or more when the pistol is unloaded; and/or

(5) A semi-automatic version of an automatic firearm; and

You sir are correct. So yeah, you can throw a huge barrel on there if you want and keep no stock. But since its still a pistol, no 7.62x54R :naughty:

  • Author

http://www.bellmtcs.com/store/index.php?cid=239

 

some info about it... long story short call T/C with the serial number before buying to ensure it left the factory as a pistol. If you get a trigger group that left as a rifle, it will be classified as a SBR if you go under investigation. If its a pistol, you are just that badass ;)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.