Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Where can i get camo done on my rifle.

Featured Replies

  • Author

i did that but i want someone to do it for me.

  • Author

maybe od green with some white stripes

I recommend doing it yourself. It is a really easy project. I used alumahyde from brownells, and just a little shredding of masking tape and it comes out good. I had never done any kind of camo before and here is the monster mosin I did. If you want more info on the process, just let me know

DSC00305.jpg

  • Author

I recommend doing it yourself. It is a really easy project. I used alumahyde from brownells, and just a little shredding of masking tape and it comes out good. I had never done any kind of camo before and here is the monster mosin I did. If you want more info on the process, just let me know

DSC00305.jpg

 

 

yes please can you tell me what did you use and where did you buy it/. if you dont mind explaining the process

  • Author

thx for them websites its 330.00 to send it out with a 4-5 week turnaround.

well, here is the quick and easy version. I will write a good step by step some time later on.

 

1) fully de-grease the entire gun. I used brake cleaner and followed it up with a rag soaked in lacquer thinner

2) paint the rifle one solid coat of what ever you want the color of your stripes to be, I used black

3) drink beer

4) now that the rifle is one solid color, start shredding up some masking tape for your stripes. The more jagged the better

5) apply your stripes in random on the entire gun.

6) drink beer

7) paint the entire gun whatever you want the background color to be. I used OD green.

8) drink beer

9) now that the paint has dried, remove the masking tape stripes while the paint is still soft.

10) drink a couple of beers

11)your gun is now striped, if you want to put highlights like I did follow on

12)Since the paint I used is in a rattle can, and I am too cheap to buy an airbrush I just sprayed the paint on a paper plate and did the highlights with an artists paint brush. I went completely random and didn't outline every stripe, and did little sploches all over( those were mostly from the "drink beer steps")

13) let your outlines dry and go over the entire gun lightly with steel wool. Once steel wooled, put a coat of clear on the entire thing.

  • Author

thx doesnt sound so hard whats the durability of chipping or flaking?

If you use the alumahyde from brownells, it is really BULLET PROOF! I slipped tightening the action screws and swore I scratched the hell out of the paint, didn't even leave a scratch. the only downside is it takes about 3 weeks to fully cure. So I would put a coat on, let it sit 3 weeks and then do the next color. If not, it supposedly bubbles. I have heard of people using BBQ paint with great success. I have several bad things about duracoat. Even though it dries quick, I heard it is junk. If wanting durability, I would just go the alumahyde route even though it is a pain in the A$$.

  • 2 weeks later...

Just a FYI. I've done two camo jobs on my rifles. My first was on my Mossy 500 about 10 years ago using Bow-flage which is labeled as temporary...10 years later it still looks pretty damn good with hard hunting use in all sorts of weather. The little wear has actually made the camo look better. My most recent was on a AR where I had a CavArms lower in OD and then bought some Krylon OD and hit my quad rail, Surefire, LaRue mounts, Aimpoint and other parasites. It has seen two years of severe use and looks damn good. I did not do the barrel or the receiver.

 

I kind of do things a little different. First degrease the hell out it. Then heat the metal up a bit to open up the pores to allow better paint penetration. Not super hot 200 - 250 is good enough. Then I get two jumper leads (wires with alligator clips) and hook on lead to the rattle can and a battery terminal (car, motorcycle, fresh lantern battery). The other jumper to the metal of the gun and the other terminal of the battery. The paint gets a slight magnetic charge to it and the metal draws the paint in like a magnet. Professional, no. Works, hell yes. YMMV.

 

Wojo

Really? humm.. Whered you learn how to do that?

 

I believe a professional version of this process is used in the automotive industry to paint cars.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.