Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Magnalube-G - Linden, NJ company

Featured Replies

I was at the CJRPC indoor range a few weeks ago, and there stood a small display box with small packets of "Magnalube-G" PTFE grease. The box had marketing material all on it about how its great for guns. Free is free, even though I figured it was some kind of snake-oil.

 

I took it home, and tried it out on a few guns, both pistols and rifles. I was pleasantly surprised at how nice the stuff worked. It was sticky enough to stay put, without being overly gooey. An invisible thin coating provided all that was needed, I used about a half pencil-eraser size amount on each gun. It works great all high friction areas, and does not drip off. Slides and bolt carriers seem to glide much smoother and nicer than with say the TW-25B lube I typically use. It is especially nice on SA handgun slides rails.

 

It is a grease use it where grease makes sense, so you still want a flowing oil type of lube for use on small intricate parts, especially ones you can't get easily get at.

 

After this experience, I looked up more info on the web around this company. I found out they are located in Linden, NJ. They've been around for 30 years, and mostly seem to sell to the industrial/commercial/automotive markets. Apparently this stuff has been re-discovered as an excellent gun lube. There's lots of reviews popping up out on the inet for this stuff, all of them that I've found have been positive.

 

It is cheap, and a small tube will last a long long time. A 2 pack of .75oz runs for $12. That should last years, as I barley put a dent in this little 5cc pillow pack after lubing 4 guns. If you are in the market for a gun grease, want to try something new, or would like to support a NJ company, my thumbs up on this purchase. Amazon even sells it.

 

They don't claim the PTFE impregnates, bonds, or any other snake-oil terms, seems it is one of the components in suspension within the grease carrier base.

 

Info:

www.magnalube.com

Spec Sheet PDF

 

 

Some reviews:

http://www.armsvault.com/productreviews_0017_magnalube_magnalubegrease_aug10.asp

http://www.theboxotruth.com/docs/edu94.htm

Not sure what the op temps are for this product, but be wary of using grease in the colder months, especially if you have to rely on your firearm for function be it for protection or recreation. I've been a long proponent on using grease on slide rails and stuff but its given me issues in the winter matches where it caused sluggish slide related issues like FT Feed/FT Fire. Summer is a whole different ball game though and keeps the machine lubed when the heat is on.

I have one in my garage for occasional use and testing, suppressed only. I could really blast in the basement but I don't want that stuff getting into my HVAC system or otherwise laying around.

 

I could do my backyard but it would require BIG berm just for appearances, not really for safety.

I have one in my garage for occasional use and testing, suppressed only. I could really blast in the basement but I don't want that stuff getting into my HVAC system or otherwise laying around.

 

I could do my backyard but it would require BIG berm just for appearances, not really for safety.

Umm, are we still talking about lube here? lol

Umm, are we still talking about lube here? lol

 

Where did that post of mine come from? :D

 

I think I was responding to the wrong thread.

  • Author

This stuff claims -40 to 500F performance. I think the trick is to employ a minute amount, to the point you cannot even see the green color of it on the surface. One of the forums I was reading stated they called Magnalube and spoke with an engineer, that was the advice for its usage in firearms.

 

I'll leave a treated pistol out in the garage for a few hours. Should be a nice 10F by then i'll see if it gums up. Unscientific, and its not live firing, but the best I can do under the circumstances.

  • Author

OK, i froze a handgun in the freezer down to 0F (digital display on the freezer panel). It was so cold that it hurt to touch the metal parts with bare skin.

 

I did notice an ever slight increase of resistance in racking the slide. It almost had a smoothing effect. I don't think it would be enough to cause a malfunction. I only used a tiny amount of grease on the slide parts, if it was gummed up with the stuff, I'm sure it would have a problem.

 

Next would be to take it to the range frozen in a cooler for a real test.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.