How hard is it if you have a dremmel? Do you need to coat it with something when you're done?

Probably better left to a gunsmith. You would want to cover the cut with something as well otherwise you're going to have bare metal exposed and that will lead to corrosion.

use a dremmil with a cut off wheel then cold blue it .

 

about a 3 min job

use a dremmil with a cut off wheel then cold blue it .

 

about a 3 min job

 

+1, thats how you do it

Anyone have any cold blue?

Anyone have any cold blue?

 

Help me out here, Is the sight tower steel or aluminum? Blueing or phosphate touch-up on steel, Aluminum black or phosphating touch-up on aluminum. Touch up stuff is cheap. Get the right stuff. Hey Adam-Want to see me do it right here on the coffe table?

...

Anyone have any cold blue?

 

Dicks or a similar sporting goods store will have it, its cheep maybe 5 bucks

 

just dab it on then oil it up and let it soak in

Help me out here, Is the sight tower steel or aluminum? Blueing or phosphate touch-up on steel, Aluminum black or phosphating touch-up on aluminum. Touch up stuff is cheap. Get the right stuff. Hey Adam-Want to see me do it right here on the coffe table?

...

 

Sure man. BCM upper is incoming ETA next week. I haven't been up in your area in awhile anyways.

 

I think the FSB/sight is aluminum.