I have an eotech and while cleaning my rifle I accidentally sprayed some eezox on it. Ans left it like that for a week cause i didnt realise it. Now when I look through the glass the image is not as crisp as it was before. It looks smudged. I tried cleaning the glass with lens cleaner but it does not help..... Did I kill it or something? Can you guys give me an adivise pls. Thank you.

Hmmm... I would try a little bit of simple green on a rag. I did that to a scope once and the simple green cleaned it right off. But that was CLP and not eezox, which I have no idea what it is and have never used it.

Hmmm... I would try a little bit of simple green on a rag. I did that to a scope once and the simple green cleaned it right off. But that was CLP and not eezox, which I have no idea what it is and have never used it.

 

It seems I can't find what "clp green" is just by googling. Where can I buy that? Thank you.

I would try Camera Lens cleaner first. It won't damage any coating on the lenses.

 

Simple Green has a specific glass cleaner, don't use the generic cleaner.

When eezox dries, it leaves behind a dry film lubricant. That is probably what is fogging up the Eotech. It's pretty tenacious stuff.

 

This may sound odd, but it should work... Spray some eezox on a cottonball or something, then swirl it around while wet on the affected lens. Make sure you are tilting the eotech down as you don't want eezox to flow into the casing crevices. The solvent carrier in the eezox will dissolve the dried stuff. Do that for about 30 seconds, then immediately wipe it off with a soft cloth, followed by a clean cloth saturated with alcohol, then wipe dry. I'd apply alcohol and wipe a few times, make sure you use a clean cloth to do this, like a nice microfiber.

 

Good luck!

Thanx guys! I will try it tomorrow. Will let you know what happens.