Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Places in NJ that will Teflon coat my M&P?

Featured Replies

So yes I only had the gun for a few days and I already have a scratch on the ejection port because of a snapcap getting lodged (probably because I didnt rack the slide hard enough). Regardless, I have always been a fan of bi-tone guns and was wondering if there was anybody in the area that would be able to apply a teflon (or any other sort of finish) to my guns slide in order to customize it. So any tips/pointers?

You probably mean Cerakote or similar finish appropriate to a firearm. I'm not sure if there are any local places, most people tend to ship to a reputable vendor.

 

But let me be the first to say, seriously, on an M&P? If it's that important to you then go for it but I really think that after a few months you'll realize it was not money well spent.

You probably mean Cerakote or similar finish appropriate to a firearm. I'm not sure if there are any local places, most people tend to ship to a reputable vendor.

 

But let me be the first to say, seriously, on an M&P? If it's that important to you then go for it but I really think that after a few months you'll realize it was not money well spent.

 

+1. I think scratches on "working" guns like Glocks and M&Ps indicate character. Remember that even though the surface is scratched, the metal protection treatment is still there, so it is not going to prematurely rust in that spot. A pristine Glock looks funny to me.

  • Author

well its my first gun ... lol I want it to look nice for a long time lol just saying.

  • Author

+1. I think scratches on "working" guns like Glocks and M&Ps indicate character. Remember that even though the surface is scratched, the metal protection treatment is still there, so it is not going to prematurely rust in that spot. A pristine Glock looks funny to me.

 

Well atleast that is good to know ... kinda pissed I scratched it but its not horrible and its only inside the ejection port from a snapcap getting sandwiched in there so I mean its not unbearable. Maybe I'll save the money and look towards other upgrades or my next gun :)

67gtonut just had his M&P done. I'm pretty sure he sent it out for the work. If you can't find a local shop to do it, ask him where he had his done. He's pretty satisfied with the results.

Yeah, I now it's your first gun, which is why I'm really urging you to resist the temptation to treat it like some type of heirloom or prized possession. An M&P is a fantastic tool, it will serve you well for years and MAYBE at some point you'll just wear it out. You'll replace it like a pair of socks. All you need to do is to clean and lube it occasionally, and replace the springs and other consumables at specified intervals instead of waiting for them to malfunction. Other than that, don't worry about the thing and just keep training. And if you get some money to sink into more stuff, get another IDENTICAL M&P so you can keep one in ready condition at home while beating up the other for consistent training.

 

If ever you get to the point where you DO want a "prized" gun, It's probably not going to be an M&P. It'll probably be a gun made of all metal.

I've always subscribed to the notion that you shouldn't be concerned about the guy with a safe full of pretty guns, but the guy with one gun with the finish worn off is the guy you have to watch out for, he probably knows how to use it. It's a tool. If you don't refinish your hammers and screwdrivers, I wouldn't refinish a gun unless its rusting or is truly some form of "art gun" you had built. An M&P is great gun, but don't sweat the finish, shoot it some more until it is evenly scratched up and beat up.

  • Author

Ok cool ... I ll look into the upgrades that Wastegate suggested and pay off my CC then apply for my next PP cause i want that SR1911!!

OK.... I will be on both sides of the fence...

 

You just got the gun.... break it in, get used to it. Do your mods as far as getting the trigger where you want it, such as APEX stuff, or sending to a gunsmith if you choose to...

 

Make sure its going to be your " go to " gun .... or at least know its going to be a keeper. No sense spending money on coatings until you are sure that it is the gun for you.....

 

Once you know.... like I decided.... then yeah, a nice quality coating can increase the "look" of the gun.

 

I went with a coating that actually had some properties to it that did something....

 

I went with Robar np3 coating...

 

read info here

 

http://www.robarguns.com/np3.htm

 

Here is how mine turned out

 

Robar.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.